01-285-7069
Mounting Bracket
01-285-7070
Mounting Bracket
01-285-7072
Mounting Bracket
01-285-7075
Mounting Bracket
Aluminum alloy, qq-a-200/8 6061-T6 or qq-a-200/16 6061-T61; 1.500 in. lg; 1.290 in. w; 0.620 in. ht; two holes 0.192 in. min
01-285-7076
Mounting Bracket
Xaluminum alloy, qq-a-200/8 6061-T6 or qq-a-200/16 6061-T6; 1.390 in. lg; 0.830 in. w; 0.760 in. ht; two holes 0.192 in. min
01-285-7079
Mounting Bracket
Steel, astm A582 uns S30300 cond a; 3.520 in. lg; 0.875 in. w; 0.518 in. ht; two slots 0.711 in. lg by 0.180 in. min
01-285-7086
Mounting Bracket
01-285-7087
Mounting Bracket
01-285-7088
Mounting Bracket
01-285-7090
Mounting Bracket
01-285-7091
Mounting Bracket
01-285-7092
Mounting Bracket
01-285-7093
Manual Control Handle
01-285-7115
Angle Bracket
Angle
01-285-7117
Angle Bracket
Angle
01-285-7119
Double Angle Bracket
Mcenter section has seven 0.179 in. min, 0.185 in. max dia holes; two 0.233 in. min, 0.239 in. max dia. holes; one 0.179 in. min, 0.185 in. max dia hole with a 100.0 deg by 0.271 in. min, 0.279 in. max dia countersink adjacent angles
01-285-7122
Double Angle Bracket
Double angle
01-285-7134
Access Cover
0.191" hole diameter 2.450" outside diameter rivet included
01-285-7136
Block Section Clamp
01-285-7146
Mounting Bracket
01-285-7147
Mounting Bracket
Aluminum alloy, qq-a-250/13, alloy 7075-T6; 12.239 in. lg, 5.500 in. w, 0.180 in. min, 0.200 in. thk, furn w/various hole diameters
01-285-7148
Detent Plunger
01-285-7150
Swivel Caster
Swivel offset
01-285-7151
Threaded Spacing Standoff
01-285-7152
Threaded Spacing Standoff
Insert one end left internal
01-285-7162
Access Cover
Used on missile bit test set. 0.158" hole diameter item has 2 holes csk dia 0.279 to 0.289 in. x 100 deg
01-285-7169
Butt Hinge Leaf
Right hand; hinge pin p/n MS20253P4-233 butt parallel holes
01-285-7406
Protective Dust And Moisture Cap
01-285-7425
Double Angle Bracket
Used on equip/furnishings;b-1b acft. adjacent angles
01-285-7451
Manual Control Handle
01-285-7452
Retaining Seal Plate
01-285-7511
Lock-release Lever
01-285-7613
Mounting Bracket
Material: cres steel; finish: passivation; 2.94 in. w; top edge bent AT0.25 deg angle; 3 holes 0.228 in.; 1 hole 0.594 in.
01-285-7692
Protective Dust And Moisture Cap
01-285-7757
Mending Plate
11.750" overall length 3.880" overall width 0.375" material thickness one end tapered to 3.060 in. wide; 1.000 in. radius four corners enamel lusterless surface treated rectangular
01-285-7758
Angle Bracket
01-285-7759
Angle Bracket
01-285-7760
Angle Bracket
Angle
01-285-7761
Angle Bracket
Second leg has 12 holes angle
01-285-7762
Angle Bracket
Plastic polyurethane surface treated angle
01-285-7763
Double Angle Bracket
Furn w/plate nut anodize surface treated double angle
01-285-7801
Mounting Bracket
Polyurethane coating, green no. 383; consists of hinge
01-285-7802
Mounting Bracket
Steel, comp 311, mil-s-5059, 1/2 hard; 0.050 in. material thk; two 0.190 in. min, 0.196 in. max dia holes; two 0.265 in. min, 0.272 in. max dia holes; two 0.265 in. min, 0.272 in. max dia holes; irregular shape
01-285-7814
Retaining Strap
01-285-7815
Retaining Strap
2.721" overall length 0.497" overall width 0.040" material thickness zinc surface treated saddle arch
