01-281-7794
Drawer Extension Slide Section
01-281-7796
Threaded Rod End
01-281-7798
Mounting Bracket
01-281-7799
Shimmy Damper
01-281-7833
Angle Bracket
0.270 in. min angle
01-281-7946
Mounting Plate
01-281-7961
Mounting Bracket
01-281-7984
Butt Hinge
4.500" overall length 0.051" material thickness butt
01-281-7985
Handwheel
10.000" outside diameter
01-281-8026
Helical Compression Spring Seat
Lubricant dry film surface treated
01-281-8292
Bow Handle
4.374" overall length chromate surface treated unf thread series
01-281-8295
Retaining Clip
Used on howitzer, light towed, 105mm, m119a1.
01-281-8317
Cushioning Pad
Eight holes 0.187 dia
01-281-8354
Access General Purpose Door
Used on 2330-01-275-7474 heavy expanded mobility ammunition trailer.
01-281-8389
Threaded Spacing Standoff
01-281-8425
Angle Bracket
Angle
01-281-8426
Double Angle Bracket
Used on lau-105. ist leg has keyway opening oa lg 0.685 in., keyway width 0.145 in., lg 0.200 in.; 2nd leg has 2 openings 0.622 in. to 0.630 in. lg & 0.562 in. to 0.567 in. width, dist from edge to opening cntr along width 0.920 in. w/dist from edge to cntr along lg 0.810 in. adjacent angles
01-281-8465
Access Cover
0.136" hole diameter chromate surface treated
01-281-8466
Access Cover
Contains 2 hexagonal-shaped holes
01-281-8467
Access Cover
0.219" hole diameter
01-281-8468
Access Cover
0.129" hole diameter chromate surface treated
01-281-8470
Access Cover
Used on alq-131. item requires 2 pin assemblies, p/n 431R004G01, 1 frame p/n 757R554G01, 1 door p/n 546R388G01, 30 blind csk rivets, vendor p/n M7885/3-4-5, gov't p/n mil-r-00788, also requires 30 washers p/n AN960PD4 & 7 buna-n-seals p/n 587R263H02; inside surfaces to have a thin layer of epoxy polyamide (polyep) coating to seal metal spray & emi sheild to be 0.010 in. aluminum sheild on all surfaces as noted primer surface treated
01-281-8471
Access Cover
Used on APG-63. 0.124" hole diameter item finished with anodic film, chromic acid (black) per mil-std-171 finish no. 7.12; the p/n is coated with fungus proof varnish mil-t-152 per 1854004 (ps)
01-281-8473
Access Cover
Used on amraam lau128a. requires 14 self-locking plates p/n MS21076L4, 28 rivets p/n MS20426AD3 chromate surface treated
01-281-8475
Access General Purpose Door
Used on lantirn. requires 1 hinge p/n 742887-2, 1 ram air door seal p/n 742887-3, 1 pin p/n 744970 & 1 spring p/n 745704 anodize surface treated
01-281-8537
Pad Eye
7.380" overall length 3.000" overall width rectangular
01-281-8578
Mounting Bracket
Used on C-130. dmaterial qq-a-362, 2024-0 clad, 0.125 in. thk; oa lg 10.300 in., has 2 mtg holes 0.260 in. to 0.267 in.; item has adjacent angles, 1st leg lg 2.500 in., 2nd leg lg 2.060 in., cntr section hght 2.600 in.
01-281-8690
Threaded Spacing Standoff
01-281-8725
Nut And Bolt Locking Plate
Item is not csi but has critical feature that must maintain a tight fit tolerance radius
01-281-8726
Pipe Hanger
Item will be positioned/secured on the uut by 2 knurled knobs that are part of the item
01-281-8730
Synchro Clamp
0.128" hole diameter 0.250" outside diameter
01-281-8737
Extension Handle
9.940" overall length
01-281-8798
Bumper
Used as foot round; end item identification, 6640-01-247-4992
01-281-8863
Straight Headless Rod
Cadmium surface treated
01-281-8864
Threaded Spacing Standoff
Left internal
01-281-8964
Expansion Plug
01-281-9154
Solid Plain Disk
01-281-9176
Threaded Rod End
01-281-9184
Mounting Bracket
01-281-9218
Angle Bracket
01-281-9242
Block Clamp
3.750" overall length 0.750" overall width rectangular
01-281-9243
Block Clamp
4.249" overall length 1.000" overall width rectangular
01-281-9253
Butt Hinge Leaf
0.730" overall length 0.050" material thickness opposite of p/n 717611233-001
01-281-9254
Rod End Connector
3b rod connection thread class right-hand rod connection 0.205" rod connection thread length tongue 0.320 in. min 0.340 max dia w/two flatted surfaces phosphate manganese or phosphate zinc surface treated connector unf rod connection thread series
