01-273-6964
Helical Compression Spring Seat
0.5156" bore diameter
01-273-6966
Line Supporting Strap
Self clinching
01-273-6967
Quick Release Plunger
0.531" thread length 32 thread quantity per inch unc thread series
01-273-7158
Angle Bracket
01-273-7388
Sliding Door Track
01-273-7477
Retaining Strap
01-273-7628
Mounting Bracket
01-273-7684
Mounting Bracket
01-273-7824
Manual Control Handle
01-273-8135
Rod End Connector
3a rod connection thread class right-hand rod connection passivate surface treated unf rod connection thread series
01-273-8142
Spring Holder
Used on gun silencer (improved hushpuppy). item is a hollow tube holding a spring which is 0.750 in. long, dia 0.188
01-273-8157
Catch Strike
1.000" overall length 2.000" overall width 0.125" material thickness cadmium surface treated
01-273-8392
Access Cover
Used on 2350-01-031-8851.
01-273-8490
Rod End Connector
3a rod connection thread class left-hand rod connection passivate surface treated unf rod connection thread series
01-273-8821
Mounting Plate
Used on 2350-00-808-7100,m9 ace armoured combat earthmover.
01-273-8823
Mounting Bracket
Used on 2330-01-224-9244. bracket consisting of the following:plate, p/n 12360412, 1 ea; fitting, p/n MS15001-1, 2 ea; pin, p/n 12360413, 1 ea; plate, p/n 12354100-3, 1 ea; arm, p/n 12353928-1, 1 ea; arm, p/n 12353928-2, 1 ea;
01-273-8830
Access Cover
Used on 1430-01-181-5884. 0.170" hole diameter
01-273-8839
Access Cover
Used on control cylinder for tak-rx hagglund 50 ton deck crane model tg 5026. crane part supports fast sealift ship cranes for t-akr 287-294 class ship
01-273-9325
Nut And Bolt Retainer
01-273-9326
Nut And Bolt Locking Plate
01-273-9335
Spring Tension Clip
0.030" material thickness clip top corners are radiused at 0.031 in. min.-0.070 in. max. on a 19.0-21.0 deg. angle; clip ends at opening turn outward at 14.0-16.0 deg. from clip center line; clip grip dia. at closure is 0.141 in. min.-0.180 in. max.; clip top is radiused on all four corners at 0.016 in. min.-0.062 in. max., at 0.062 in. min.-0.125 in. max. from length edge passivate surface treated
01-273-9358
Angle Bracket
Protective finish per paragraph 2.4 exterior paint system drawing 12350824 angle
01-273-9500
Double Angle Bracket
Oxide surface treated double angle
01-273-9504
Access Cover
Item is of irregular shape, largest outside dimensions are 3.812 in.wide, 3.625 in. high, 1 corner is beveledat 45 degree angle, item has 7 holes for mounting purposes 0.136 in. dia
01-273-9505
Access Cover
Used on f-16c/d aircraft. 5.060" outside diameter
01-273-9506
Access Cover
Used on f-16c/d aircraft. 5.060" outside diameter
01-273-9507
Access Cover
0.128" hole diameter
01-273-9520
Loop Clamp
Spring tension clamp dia 1.125 in.
01-273-9597
Mounting Bracket
Used on b52an/asg-33. aluminum alloy 6061-T6, qq-a-250/11, oa lg 1.775 in., oa width 0.920 in., oa hgth 1.408 in., anodized per mil-a-8625 type 3 cl 1 (ps 403-4) , has 2 holes, dia 0.126 in. , 2 holes threaded 0.190-32 unf-2b minor 0.156 T0 0.164 in. thru, 0.230 in. x 118 deg porm 5 deg farside
01-273-9708
Threaded Rod End
3a thread class right-hand 10.000" overall length unjf rod connection thread series
01-273-9878
Angle Bracket
01-273-9879
Angle Bracket
01-273-9882
Angle Bracket
Angle
01-274-0018
Drawer Extension Slide
01-274-0086
Angle Bracket
01-274-0087
Angle Bracket
01-274-0088
Angle Bracket
Anodize or chromate surface treated offset angle
01-274-0089
Angle Bracket
01-274-0115
Loop Clamp
Used on helicopter, lamps mark iii, sh-60b. 0.500" overall width 0.030" material thickness passivate band surface treated offset mount
01-274-0117
Loop Clamp
0.375" overall width 0.017" material thickness passivate band surface treated offset mount
01-274-0129
Mounting Bracket
Paint, urethane, aliphatic isocyanate, mil-c-83286; orange-yellow color, 13538, GSS4510, grumman aerospace corp; 7.120 in. lg; 6.250 in. w; 3.000 in. h; 0.250 in. thk stock; two mtg slots 1.125 in. lg by 0.453 in. w; one corner of base beveled 2.000 in. by 45.0 deg; c/o two corner plates, two gussets
