00-181-1219
Synchro Clamp
0.165" hole diameter
00-181-1221
Threaded Spacing Standoff
2b left internal (includes thru thread) thread class right-hand left internal (includes thru thread) passivate surface treated projection both ends unc left internal (includes thru thread) thread series
00-181-1222
Threaded Spacing Standoff
2b left internal (includes thru thread) thread class right-hand left internal (includes thru thread) passivate surface treated projection both ends unc left internal (includes thru thread) thread series
00-181-1223
Threaded Spacing Standoff
Projection both ends right external thread
00-181-1224
Threaded Spacing Standoff
2a right external thread class right-hand right external 0.111" right external thread length 0.109 in. dia hole 0.520 in. deep on end opposite threaded shank passivate surface treated projection one end unc right external thread series
00-181-1225
Mending Plate
0.800" overall length 0.115" overall width 0.036" material thickness rectangular
00-181-1275
Threaded Spacing Standoff
2.310" left internal (includes thru thread) thread length groove 0.015 in. deep, chamfer one end 0.030 by 45 degrees, center hole 0.120 in. dia left internal thread
00-181-1339
Butt Hinge Leaf
5.271" overall length 0.062" material thickness one end, knuckle lg, 0.491 in. min, 0.495 in. max, chamfered from knuckle end to outside edge, 0.446 in. min, 0.466 in. max butt parallel holes
00-181-1359
Nut And Bolt Retainer
0.968" overall length 0.040" material thickness passivate surface treated anchor
00-181-1379
Rim Latch
Hole diameter:0.190 in.min, 0.196 in.max; hole spacing:2.000 in. c to c
00-181-1380
Helical Compression Spring Seat
0.1900" bore diameter not casehardened cadmium surface treated seat
00-181-1381
Helical Compression Spr Retainer
Cadmium surface treated parallel
00-181-1383
Webbing Strap
00-181-1395
Bumper
0.375" hole diameter
00-181-1418
Retaining Strap
2.380" overall width
00-181-1484
Electronic Equipmen Hardware Kit
00-181-1487
Threaded Spacing Standoff
Left internal
00-181-1543
Synchro Clamp
0.110" hole diameter cadmium surface treated
00-181-1546
Protective Dust And Moi Cap-plug
Plug, dust shield
00-181-1620
Retaining Strap
2.620" overall length 0.760" overall width 0.500" material thickness 0.420 in. dia hole on flatted end triple arch
00-181-1657
Loop Clamp
Used on w/s: engine, aircraft tf33-pw-102 (c-135e, ec-135h/k/p); aircraft, f-111; engine, aircraft, tf-33-p-7 (c-141a/b); engine, aircraft tf33-p-3/5/9 (c/ec-135, b-52h) engine, aircraft tf-30. center mount
00-181-1672
Flush Catch
Matl:body steel, button alum. alloy; button anodized button actuator
00-181-1675
Swivel Caster
Swivel offset
00-181-1689
Threaded Spacing Standoff
Projection both ends right external thread
00-181-1953
Electronic Equipmen Hardware Kit
00-181-2186
Rod End Connector
3b rod connection thread class right-hand rod connection 0.250" rod connection thread length connector unf rod connection thread series
00-181-2344
Manual Control Lever
Aluminum alloy, 4.031 in. lg, 0.609 in. w, 0.188 in. thk, hole for knob 0.193 in. min, 0.200 in. max dia
00-181-3381
Mounting Bracket
00-181-3581
Rod End Clevis
0.188" hole diameter 0.249" overall width clevis
00-181-3592
Angle Bracket
Used on uh-1 series helicopter.
00-181-3593
Angle Bracket
00-181-4289
Shimmy Damper
00-181-4474
Solid Plain Disk
00-181-4569
Protective Dust And Moisture Cap
00-181-5022
Rod End Clevis
3b rod connection thread class right-hand rod connection 1.219" rod connection thread length 1.375" overall width clevis unf rod connection thread series
00-181-8112
Mounting Plate
Used on end item is tank ; nsn 2350-00-756-8497 ; model m60.
00-181-8226
Butt Hinge
0.075" material thickness butt
00-181-8227
Double Angle Bracket
2.312 in. from edge to first hole center in center section; 3.812 in. distance between first enamel semigloss or enamel surface treated adjacent angles
00-181-8228
Mounting Bracket
Steel qq-s-741; 27.938/28.062 in. lg; 4.000 in. wd; 4 holes 0.375 in. dia; 4 holes 0.562 in. dia primer or enamel semigloss or enamel surface treated
00-181-8236
Butt Hinge Leaf
1.500" overall length 0.250" material thickness butt staggered holes
00-181-8238
Angle Bracket
Angle
00-181-9130
Retaining Strap
1.125" overall length 0.625" overall width 0.062" material thickness curved arch
00-181-9132
Nut And Bolt Locking Plate
00-181-9309
Straight Headless Rod
Used on C-54.
00-182-3335
Helical Compression Spring Seat
Cadmium surface treated
00-182-3724
Catch Strike
1.160" overall length 0.365" overall width 0.040" material thickness cadmium surface treated
00-182-3734
Rod End Clevis
0.189" hole diameter 0.430" overall width
