01-266-8660
Synchro Clamp
01-266-9173
Double Angle Bracket
01-266-9225
Mending Plate
71.440" overall length 4.000" overall width 1.000" material thickness color green no. 24052 per fed-std 595; three of the six mounting holes are 0.647 in. min rectangular
01-266-9226
Angle Bracket
Angle
01-266-9227
Angle Bracket
01-266-9228
Angle Bracket
Color dull black no. 37038, fed-std-595 primer surface treated angle
01-266-9247
Protective Dust And Moisture Cap
Furnished w/lanyard passivate surface treated
01-266-9381
Access Cover
0.276" hole diameter paint enclosed area paint surface treated
01-266-9399
Expansion Plug
01-266-9451
Angle Bracket
01-266-9452
Angle Bracket
01-266-9457
Bow Handle
Used on amplifier rack RCG9 assembly channel
01-266-9573
Catch Strike
Item is 9.960 in long, 1.250 in wide, 0.095 in thick; mounting hole 1.300 in from each end 0.190 in dia cadmium surface treated
01-266-9600
Mounting Bracket
Material alumium 5083-H323 or H321 spec qq-a-250/6; dimensions 22.90 in long, 9.94 in high, 4.15 in wide
01-266-9675
Block Clamp
3.850" overall length 1.000" overall width requires clamp block halves p/n -103 & -105 which are fastened together& stocked as one part rectangular
01-266-9777
Swivel Caster
01-266-9793
Protective Dust And Moisture Cap
01-266-9794
Protective Dust And Moisture Cap
01-266-9795
Protective Dust And Moisture Cap
01-266-9796
Protective Dust And Moisture Cap
01-266-9816
Threaded Spacing Standoff
Both ends countersunk to 0.020 in. dia left internal
01-266-9984
Threaded Spacing Standoff
Left internal
01-266-9995
Multiple Angle Bracket
Used on oh-58d hel.
01-266-9996
Angle Bracket
01-267-0196
Helical Compression Spr Retainer
01-267-0197
Helical Compression Spr Retainer
01-267-0198
Helical Compression Spring Seat
01-267-0222
Manual Control Lever
01-267-1091
Spring Holder
0.d.2.750 in. nom.; i.d. 2000 in. nom.; crane-seal type
01-267-1153
Protective Dust And Moisture Cap
01-267-1154
Protective Dust And Moisture Cap
Color red per mil-std-104
01-267-1155
Protective Dust And Moi Cap-plug
Color black
01-267-1271
Synchro Clamp
0.113" hole diameter cadmium surface treated
01-267-1542
Mending Plate
1.760" overall length 2.140" overall width 2.000" material thickness rectangular
01-267-1546
Access Cover
Used on p/n 120-3404-2;f100/220 engine. 0.280" hole diameter 2.180" outside diameter anodize surface treated
01-267-1666
Mending Plate
01-267-1710
Retaining Clip
01-267-1712
Rod End Clevis
01-267-1976
Angle Bracket
01-267-2149
Access Cover
0.332" hole diameter includes 2 skins primer surface treated
01-267-2165
Mounting Bracket
Tmaterial:aluminum, 5086-H32, per spec qq-a-250/7.optional material:aluminum 5052-H32, per spec qq-a-250/8 or aluminum, 5083-H323, per spec qq-a-250/6. protective finish per paragraph 3.4, interior paint system, drawing 19207-12350824.
