01-262-2080
Loop Clamp
Used on foreign military sales.
01-262-2081
Loop Clamp
Used on foreign military sales.
01-262-3126
Angle Bracket
01-262-3148
Access Cover
Used on aircraft model f-18.
01-262-3149
Access Cover
Used on aircraft model f-18.
01-262-3670
Double Angle Bracket
Chromate surface treated double angle
01-262-3713
Retaining Strap
2.221" overall length 0.500" overall width 0.040" material thickness passivate surface treated saddle arch
01-262-3760
Angle Bracket
01-262-3811
Mounting Bracket
1.6400" overall length 0.8140" overall width anodize surface treated
01-262-3861
Double Angle Bracket
Attached with rivets; requires clip nut, lh position; intend for support of wire bundles only primer surface treated double angle
01-262-4054
Angle Bracket
01-262-4158
Locking Stay
Chromate surface treated
01-262-4159
Double Angle Bracket
Cntr section has 4 holes dia 0.290 w/ c to c dist btwn holes 10.500 in. chromate surface treated adjacent angles
01-262-4160
Double Angle Bracket
Used on sacdin maintenance. anodize surface treated adjacent angles
01-262-4161
Double Angle Bracket
Gusset has half oval cut 0.500 in. wide chromate zinc surface treated adjacent angles
01-262-4189
Access Cover
Used on f-16c/d aircraft.
01-262-4460
Drawer Extension Slide
Has 2 hole dia 0.374 to 0.381 in., w/ 0.375 in. dist from edge to hole cntr along width, 1.250 in. dist from edge to hole cntr along lg & 2.000 in. dist btwn hole cntrs; 4 holes dia 0.165 to 0.171 in. csk to dia 0.284 x 100 deg w/ c to c dist, along width, 0.750 in.
01-262-4461
Drawer Extension Slide Section
Item has 4 holes dia 0.223 in. porm 0.001 in. cbored to dia O500 in. x 0.072 in. dp; dist from edge to 1st hole cntr along lg 1.000, dist from edgeto hole cntrs along width 0.375 in., c to c dist btwn 1st, 2nd & 3 hole cntrs 2.000 in., dist btwn 1st & 4th hole cntr 10.656 in.
01-262-4462
Drawer Extension Slide Section
Has 4 holes dia 0.223 in. porm 0.001, cbored 0.072 in. dp to dia 0.500 in.
01-262-4463
Drawer Extension Slide
Ehas 2 holes dia 0.374 to 0.385 in. (slide section only) , w/ 1st hole located 1.250 in. from edge along lg, c to c dist btwn holes 2.000 in.
01-262-4812
Bow Handle
Unf thread series
01-262-4813
Bow Handle
6.000" overall length passivate surface treated unf thread series
01-262-4814
Bow Handle
4.875" overall length unf thread series
01-262-4856
Helical Compression Spring Seat
Passivate surface treated
01-262-4858
Drawer Extension Slide
Anodize surface treated
01-262-4888
Turnbuckle Body
01-262-4889
Webbing Strap
01-262-4897
Synchro Clamp
01-262-4898
Synchro Clamp
01-262-5217
Loop Clamp
Passivate band surface treated
01-262-5574
Permanent Magnet
Used on pacer special.
01-262-5671
Mounting Bracket
Used on l-f motor generator. consists of 1 plate assembly, p/n 25-79924-2 made from aluminum alloy 6061-T6 per qq-a-250/11, 1 bracket assembly, p/n 25-79924-10
01-262-5672
Mounting Bracket
Consists of 1 terminal board support, p/n 1319-173, 2 clip floating nuts, p/n A4972-5-62, 1 grommet, p/n AN930-1
01-262-6046
Recess Handle
01-262-6633
Threaded Spacing Standoff
3b left internal (includes thru thread) thread class right-hand left internal (includes thru thread) 0.5000" left internal (includes thru thread) thread length 32 left internal (includes thru thread) thread quantity per inch cadmium standoff surface treated two shoulders left internal unjf left internal (includes thru thread) thread series
01-262-6953
Loop Clamp
0.484" overall width 0.031" material thickness 0.062 in. thk continuous strip of corrugated sheet stock cushion single loop
01-262-6954
Loop Clamp
1.944" overall length 0.500" overall width 0.040" material thickness 0.062 in. thk cushion-corrugated sheet stock saddle mount
01-262-6955
Loop Clamp
0.500" overall width 0.040" material thickness 0.062 in. nom. cushion made of corrugated sheet stock single loop
01-262-7021
Leakproof Seal Plug
01-262-7458
Rod End Clevis
01-262-7814
Angle Bracket
