01-257-3958
Blank Panel
8.000" overall width 0.125" material thickness mounting hole quantity 18; mounting hole diameter 0.186 in mini, 0.182 in maxi; rectangular shape; 3 square corners
01-257-3960
Dust And Moisture Seal Boot
Closed end
01-257-4369
Angle Bracket
Zinc surface treated angle
01-257-4370
Angle Bracket
01-257-4371
Angle Bracket
Spacer angle
01-257-4372
Double Angle Bracket
Furnished w/one clip double angle
01-257-4373
Double Angle Bracket
Furnished w/two clips double angle
01-257-4603
Pipe Hanger
Split ring
01-257-4616
Pad Eye
5.250" overall length 10.940" overall width six threaded holes 0.687-11 uns 2b tapped through plate, two threaded holes 0.875-14 unf 2b tapped through plate chromate surface treated rectangular
01-257-4775
Retaining Clip
01-257-4826
Protective Dust And Moisture Cap
01-257-4829
Protective Dust And Moi Cap-plug
01-257-4844
Friction Catch Stud
01-257-4853
Double Angle Bracket
01-257-4854
Webbing Strap
01-257-4862
Helical Compression Spr Retainer
01-257-4863
Helical Compression Spr Retainer
01-257-4864
Helical Compression Spring Seat
01-257-4876
Extension Handle
01-257-4885
Shimmy Damper
01-257-4934
Mounting Bracket
Two legs; attached to strap by 2 LS1120-4-9 rives, 1.0000 in. from end of each leg
01-257-5004
Expansion Plug
01-257-5050
Angle Bracket
01-257-5082
Retaining Seal Plate
Matl: aisi 304 stn stl annealed
01-257-5169
Access Cover
Enamel surface treated
01-257-5170
Access Cover
0.2501" hole diameter mtg holes csk 0.400 x 100 deg requiring 18 stud nuts p/n 805233-4, 6 stud nuts p/n 805233-1 plastic surface treated
01-257-5230
Block Clamp
Used on F-15. 2.530" overall length item has hole located off cntr 0.130 in. w/ dia of 0.4062 in. porm 0.0070 in. rectangular
01-257-5231
Block Clamp
3.560" overall length 0.500" overall width has 2 slotted clamping holes on each end, lg 0.313 in., width 0.205 in. to 0.211 in. rectangular
01-257-5372
Mounting Bracket
Used on f100-pw-220 engine.
01-257-5373
Mounting Bracket
Used on f100-pw-220 engine.
01-257-5374
Mounting Bracket
2.030 in. lg, 0.940 in. min to 0.960 in. max width, 0.970 in. min to 0.990 in. max ht, contains 2 countersunk mounting holes, has 2 legs projecting vertically from the base, 0.152 in. min to 0.160 in. max leg thickness, 0.500 in. min to 0.508 in. max distance between legs, each leg has a hole thru in line
01-257-5375
Mounting Bracket
Al aly 5052 tem h 34, qq-a-250/8, chromated per mil-c-5541 cl 3, 0.040 in. thk, oa width 0.400, oa hght 1.740 in.; item has 12 slotted openings on rt side & 22 on the lft, ea. opening is 0.220 in. wide; also has 2 holes dia 0.140 in. csk 0.23 x 82 deg, 1 hole dia 0.166 in. & 2 holes dia 0.098 in. csk 0.193 x 100 deg; requires 9 nut plates p/n MS21076-L04, 18 rivets p/n MS20426A03-3
01-257-5376
Mounting Bracket
Ral aly 5052 tem 0, qq-a-250/8, 0.063 in. thk; requires 1 captive screw p/n 536735-7 & 1 retainer nut p/n 419729-1; item has 2 holes dia 0.189 in., c to c dist btwn holes 0.956
01-257-5377
Mounting Bracket
Al aly 5052 tem 0, qq-a-250/8, chromated per mil-c-5541 CL3, 0.063 in. thk, lg 1.265 in., width 0.563 in., oa hght 1.810 in.; item has plate welded to 2nd leg per mil-w-8064 CL3, plate lg 0.356 in., width 0.380 in., has 2 holes dia 0.189 in. located 0.159 in. from edge, c to c dist btwn holes 0.965 in.; 1st leg has 1 hole dia 0.219 in. csk 0.352 x 100 deg requiring 1 screw p/n 536735-7 & 1 retainer nut p/n 419729-1; item uses as required sealing compound mil-s-46163 type 3 gr q & primer compound mil-s-22473 gr n
01-257-5413
Butt Hinge
77.000" overall length butt
01-257-5414
Rod End Clevis
0.500" hole diameter passivate surface treated clevis
01-257-5415
Rod End Clevis
2.375" overall width passivate surface treated
01-257-5574
Threaded Spacing Standoff
