01-248-5441
Bow Handle
Round
01-248-5528
Mounting Bracket
Faluminum alloy per qq-a-250/4, bracket contains 2 legs, 1.620 in. lg, 0.970 in. lg for both legs, 1.060 in. leg width, 1st leg contains 1 hole, 0.182 in. to 1.830 in. hole diameter
01-248-5560
Butt Hinge Leaf
Goes on f-15 acft
01-248-5693
Clamp Bolt Assembly
2a thread class 32 thread quantity per inch
01-248-5794
Angle Bracket
01-248-6008
Retaining Strap
01-248-6009
Retaining Strap
01-248-6010
Retaining Strap
01-248-6097
Retaining Strap
01-248-6109
Protective Dust And Moisture Cap
01-248-6110
Protective Dust And Moisture Cap
01-248-6111
Protective Dust And Moisture Cap
01-248-6112
Protective Dust And Moisture Cap
01-248-6113
Protective Dust And Moistur Plug
01-248-6118
Angle Bracket
Used on sentry f22 aircraft. bracket
01-248-6119
Angle Bracket
01-248-6120
Angle Bracket
01-248-6125
Loop Clamp
0.500" overall width offset mount
01-248-6175
Grooved Headless Rod
01-248-6176
Grooved Headless Rod
01-248-6756
Protective Dust And Moisture Cap
Used on f-15a/b/c/d acft. 1.110 in. o/a lg.
01-248-6758
Catch Strike
1.150" overall length 0.315" overall width iitem has 1 slotted hole 0.190 to 0.210 in. long, 0.168 to 0.171 in. wide, c to c dist between holes 0.600 in.; dist from edge to hole cntr along lg 0.350 in.; 1 end chamfered 30 deg, lg 0.035 to 0.050 in.
01-248-6759
Helical Compression Spring Seat
01-248-7135
Mending Plate
2.330" overall length 0.530" overall width 0.187" material thickness ends radiused 0.370 in. min primer epoxy surface treated rectangular
01-248-7137
Double Angle Bracket
Center section has 1 hole 0.218 in. min adjacent angles
01-248-7244
Rod End Clevis
01-248-7270
Manual Control Handle
Steel, mil-s-18729, comp 4130; includes 1 grip, 2 screws, 2 washers, 1 spacer, 2 nuts, 1 bushing
01-248-7289
Rod End Connector
2.995 in. lg
01-248-7340
Snap Hook
0.250" inside diameter 1.875" overall length
01-248-7347
Spring Tension Clip
0.025" material thickness two 0.060 in. r lips cadmium surface treated
01-248-7624
Mounting Bracket
Used on pccn chmmwv 1 1/4 ton.
01-248-7646
Mounting Bracket
Used on pccn chmmwv 1 1/4 ton. consists of bracket, seat belt, front l.h. p/n sf-5575520 fscm 34623; bracket, seat belt, front r.h. p/n sf-5575521 fscm 34623
01-248-7649
Double Angle Bracket
Double angle
01-248-7838
Angle Bracket
Center of both legs curves in plastic epoxy surface treated angle
01-248-7839
Angle Bracket
Chromate surface treated angle
01-248-7959
Bow Handle
3.250" overall length oxide handle surface treated unc thread series
01-248-7960
Handwheel
0.502" inside diameter 3.500" outside diameter
01-248-7961
Swivel Caster
01-248-7962
Turnbuckle
2b body thread class zinc surface treated unc body thread series
01-248-8105
Webbing Strap
Lever operated ratchet buckle; 13200 pound load capacity
01-248-8109
Spring Tension Clip
0.203" hole diameter 0.020" material thickness
01-248-8176
Mounting Bracket
Nickel alloy per ams 5599, 0.076 in. min to 0.084 in. max thickness, contains 2 holes with 0.213 in. min to 0.224 in. max diameter, 2 slots with 0.270 in. min to 0.290 in. max slot width
