01-244-2720
Protective Dust And Moisture Cap
Color red
01-244-2721
Solid Plain Disk
01-244-2722
Solid Plain Disk
01-244-2731
Retaining Strap
01-244-2732
Retaining Strap
01-244-2733
Retaining Strap
01-244-2734
Quick Release Plunger
0.526" thread length 20 thread quantity per inch unc thread series
01-244-2846
Access Cover
0.109" hole diameter 4.800" outside diameter contains 1 hole offset from bolt circle dia, 0.166 in. dia anodize surface treated
01-244-2901
Angle Bracket
Zinc surface treated angle
01-244-2902
Angle Bracket
Zinc surface treated angle
01-244-3012
Mounting Bracket
Alumin alloy 5052-H32; 2.400 in. by 3.700 in., 0.093 in. thk o/a dim
01-244-3013
Mounting Bracket
8aluminum alloy 5052-H32, 2.490 in. width, 2.400 in. ht, 3.300 in. length, 0.093 in. thickness, 1 leg contains 4 holes with 0.166 in. dia, 1 leg contains 6 holes with varying diameters, 1 leg contains 10 holes with varying diameters
01-244-3014
Mounting Bracket
Yaluminum alloy 5052-H32, 0.093 in. thickness, 2.400 in. ht, 2.630 in. width, 5.250 in. lg, 1 leg contains 4 holes with 0.166 in. dia, 1 leg contains 7 holes with varying diameters, 1 leg contains 9 holes
01-244-3019
Mounting Bracket
Used on f100pw220. anodize; no anodize on nut thds.; 0.250 in. dia. mounting holes-4
01-244-3033
Mounting Bracket
Consists of 1 strut bracket, p/n 863T2010155-001, 1 lanyard type wire rope assembly, p/n ST27D2507EE0151, 1 quick release pin, p/n NAS1341C2C25d, 1 helical lock-spring washer, p/n MS35338-42, 1 pan head machinje screw, p/n MS35206-241, 0.750 in. mounting base thickness, 3.000 in. ht, 5.500 in. lg, 4.250 in. width, each leg contains 1 hole thru, mounting base contains 4 holes, 0.530 in. min to 0.537 in. max dia
01-244-3043
Mounting Bracket
Used on mau-50 bombrack. ral aly 2024 T4, anodized mil-std 1516 code as; t shaped, 1st leg lg 1.400 in., oa width 1.250 in., chamfered end width 0.625 in., & 2 holes dia 0.168 to 0.174 in., c to c dist btwn holes along lg 0.820 in., dist from edge to hole cntr along lg 0.425 in., dist from edge to hole cntr along width 0.350 in.; 2nd leg lg 1.875 in., 2 holes dia 0.200 to 0.206 in. csk 100 deg pom 2 deg by 0.406 dia, c to c dist bwtn holes along lg 1.375 in., dist from edge to hole cntr along lg 0.250 in.
01-244-3121
Hand Crank
0.744" inside diameter
01-244-3277
Webbing Strap
01-244-3280
Drawer Extension Slide
This is both the left
01-244-3441
Threaded Spacing Standoff
Left internal
01-244-3545
Threaded Spacing Standoff
2a right external thread class 32 right external thread quantity per inch flanged with left internal thread unf right external thread series
01-244-3548
Access Cover
0.228" hole diameter
01-244-3693
Helical Compression Spring Seat
Ceramic
01-244-3724
Rod End Clevis
01-244-3748
Retaining Strap
01-244-3780
Catch Strike
Used on 1430-01-228-8395.
01-244-3787
Access Cover
Used on unmanned aerial vehicles.
01-244-3804
Threaded Spacing Standoff
Cadmium surface treated internally threaded full length
01-244-3881
Protective Dust And Moisture Cap
01-244-3882
Protective Dust And Moisture Cap
01-244-3883
Protective Dust And Moisture Cap
01-244-3892
Quick Release Plunger
01-244-3936
Manual Control Handle
01-244-4054
Access Cover
0.168" hole diameter plastic surface treated
01-244-4100
Rod End Clevis
01-244-4116
Permanent Magnet
01-244-4122
Line Supporting Strap
Color black self clinching
01-244-4123
Strap Fastener Loop
0.201" hole diameter round clip loop
01-244-4124
Clamping Catch
0.125" hole diameter
01-244-4256
Pawl Fastener
Used on w/s:low altitude navigation & targeting infrared system (lantirn). grip range 0.875 in.min; 1.375 in.max; four mtg studs; includes four nuts zinc surface treated t-handle
01-244-4349
Synchro Clamp
01-244-4430
Loop Clamp
0.375" overall width 0.055" material thickness single loop
01-244-4435
Helical Compression Spring Seat
01-244-4575
Angle Bracket
