01-241-1731
Synchro Clamp
01-241-1733
Drawer Extension Slide
01-241-2045
Self-locking Insert
0.165" overall length
01-241-2046
Self-locking Insert
01-241-2047
Self-locking Insert
01-241-2048
Self-locking Insert
Requires special cleaning
01-241-2458
Mending Plate
26.120" overall length 5.620" overall width 0.125" material thickness rectangular
01-241-2464
Mounting Bracket
Material aluminum 5086-H32, spec qq-a-250/7, 0.190 thick; length 13.880"; width 8.500"; for further information see drwg
01-241-2833
Mending Plate
2.420" overall length 0.880" overall width 0.180" material thickness slots are parallel to the length; plate top serrated rectangular
01-241-2834
Angle Bracket
1st leg contains 2 square holes, 0.500 in. hole lg offset angle
01-241-2835
Angle Bracket
2nd leg contains an open-ended slot chromate surface treated angle
01-241-2836
Angle Bracket
Guide slot 0.281 in. w; three 0.470 in. dia detent holes in guide slot passivate surface treated angle
01-241-2837
Double Angle Bracket
Offset double angle
01-241-2875
Blank Panel
5.730" overall width 0.062" material thickness enamel or enamel gloss or lacquer surface treated blank, plain design
01-241-2877
Access Cover
Used on 3805-01-52-9043.
01-241-2880
Access Cover
0.255" hole diameter laminated nine ply construction; includes one 3M464C12A3L2p gang channel, three 3M464C12A2L2p gang channel, two ST3M443-4A2 platenuts; parallelogram shaped
01-241-2882
Access Cover
0.375" hole diameter 5.100" outside diameter
01-241-2960
Loop Clamp
0.484" overall width 0.027" material thickness passivate band surface treated offset mount
01-241-2961
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
01-241-3032
Handle Ferrule
0.141" hole diameter 0.378" outside diameter round
01-241-3051
Manual Control Handle
Gms 1-49 black urethane, 3.000 in.mounting base width, handle is angled 30.0 deg from a perpendicular line running straight up from mounting base center, base contains 3 holes, 0.188 in.dia thru with 0.375 in.diameter counterbore
01-241-3139
Bow Handle
Attachment method:spring pin
01-241-3142
Bow Handle
3.180" overall length anodize surface treated unc thread series
01-241-3205
Threaded Spacing Standoff
Left internal
01-241-3206
Threaded Spacing Standoff
Left internal
01-241-3207
Threaded Spacing Standoff
Zinc surface treated internally threaded full length
01-241-3208
Threaded Spacing Standoff
Anodize surface treated internally threaded full length
01-241-3284
Strap Fastener Loop
01-241-3285
Helical Compression Spr Retainer
End hole 0.625-11 unc-2b thd; external thd 1.250-12 unf-2a by 0.500 in. lg, body tapered irregular
01-241-3292
Protective Dust And Moistur Plug
Furnished w/washer, nylon, and retaining rope
01-241-3296
Retaining Strap
2.120" overall length 0.500" overall width 0.810" material thickness
01-241-3297
Retaining Strap
Curved arch
01-241-3298
Retaining Strap
01-241-3299
Retaining Strap
01-241-3351
Mounting Bracket
01-241-3645
Mounting Bracket
Used on f-100pw220 engine.
01-241-3646
Mounting Bracket
Used on f-100pw220 engine.
01-241-3648
Resilient Mount Plate
6.000" overall length 3.500" overall width rectangular
01-241-3808
Rim Latch
Used on p/n 4p20009;c5b acft.
01-241-3878
Retaining Strap
01-241-3893
Mending Plate
01-241-3914
Angle Bracket
01-241-3915
Angle Bracket
01-241-3916
Angle Bracket
