01-221-6026
Mounting Bracket
01-221-6183
Bow Handle
2b thread class 4.865" overall length 32 thread quantity per inch anodize handle surface treated round unf thread series
01-221-6331
Helical Compression Spr Retainer
01-221-6473
T Plate
2.080" overall length 2.760" overall width 0.050" material thickness tee
01-221-6499
Access Cover
Used on 1560-01-089-4445 liner assy.
01-221-6500
Access Cover
Used on cover door assy,no. 5 engine access,f-4e/gy/acft.
01-221-6501
Access Cover
Used on door assy,no. 5 engine access,f-4e/gy/acft. right appl
01-221-7191
Manual Control Handle
01-221-7437
Assembled Nut Retainer
01-221-7534
Mounting Bracket
Nickel alloy, ams 5542; 2.319 in. lg; 1.807 in. h; 0.056 in. thk min, 0.062 in. thk max; 45.0 deg bend; 1 slot 0.240 in. lg, 0.206 in. w; 1 slot 0.250 in. lg min, 0.270 in. lg max, 0.216 in. w min, 0.226 in. w max
01-221-7535
Mounting Bracket
Nickel alloy per ams 5544, 0.051 in. min to 0.061 in. max stock thickness, 1.900 in. width, 0.800 in. ht, contains 5 holes, 0.216 in. min to 0.226 in. max dia
01-221-7744
Access Cover
0.375" hole diameter thd size 3/8-16 unc-2b chromate surface treated
01-221-7834
Helical Compression Spr Retainer
Parallel
01-221-8166
Access Cover
Used on acft model f-16c/d usaf. nha 16B6599-7; eff 5c 0178, 0180, 0182, 0188, 0190, 0192, 0194, 0202, 0204, 0206, 0208, 0212, 0214, 0216, 0218, 0220, 0222, 0224, 0226, 0228, 0231, 0233 on, 5d 0031, 0035, 0037, 0039 on
01-221-8168
Access Cover
Used on acft model f-16c/d usaf. nha 16B6597-2; eff 5c 0222, 0224, 0226, 0028, 0231, 0233 9999; superseded p/n 16B6513-44 ni per ecn OF701
01-221-8169
Access Cover
Used on c-141b acft.
01-221-8310
Helical Compression Spr Retainer
Used on a/m32a-60series generator set. consists of two 11 guage crs plates; first is 5.375 in dia
01-221-8736
Double Angle Bracket
1 slot 4.350 in. w by 11.050 in. lg located on c section, 3 holes 0.154 in. min chromate surface treated double angle
01-221-8754
Access Cover
Two thru unthreaded holes, 0.154 in. min, 0.159 in. max diameter oxide film surface treated
01-221-8755
Access Cover
0.375" outside diameter
01-221-8770
Manual Control Handle
C/o handle, base, bushing, stem; weld together in accordance with mil-w-8611; length: 3.750 in. ; width: 2.000 in.
01-221-8773
Handwheel
2.250" inside diameter 24.750" outside diameter
01-221-8775
Threaded Spacing Standoff
Projection one end left internal thread
01-221-8776
Threaded Spacing Standoff
Projection one end left internal thread
01-221-8777
Threaded Spacing Standoff
Projection one end left internal thread
01-221-8793
Helical Compression Spring Seat
01-221-8861
Access Cover
Used on 3930-01-178-0954 truck,lift,fork.
01-221-8969
Helical Compression Spring Seat
01-221-9256
Loop Clamp
Mounting plate attached w/2 holes
01-221-9306
Cable Retractor
01-221-9623
Spring Holder
01-221-9767
Angle Bracket
01-221-9791
Threaded Spacing Standoff
Post, electrical-mechanical equipment
01-221-9832
Manual Control Handle
01-221-9853
Detent Plunger
01-221-9971
Angle Bracket
Attachment located on second leg centered between the holes angle
01-221-9972
Angle Bracket
01-221-9974
Angle Bracket
2 threaded holes 0.138-32 unc 2b located along length of second leg angle
01-222-0016
Loop Clamp
3.000" overall length 0.010" material thickness
01-222-0017
Loop Clamp
0.500" overall width 0.020" material thickness passivate band surface treated offset mount
01-222-0018
Loop Clamp
0.500" overall width 0.051" material thickness rectangular
