01-214-6620
Mounting Bracket
Material steel astm-A569 or astm A366 0.125 thick; length 3.500; width 2.125:for further information see drawg 19207 12326097
01-214-6744
Bridge Clamp
0.295" hole diameter 26.350" overall length 1.250" overall width primer surface treated flat
01-214-6774
Helical Compression Spr Retainer
01-214-6798
Synchro Clamp
length: 1.500 in. ; height: 0.730 in.
01-214-6929
Access Cover
Used on caterpiller tractor,model d6d.
01-214-6930
Access Cover
Used on caterpiller tractor,model d6d.
01-214-7127
Protective Dust And Mois Cap Set
01-214-7219
Mounting Bracket
Used on f100-pw-220 engine. stainless steel per ams 5510, 0.038 in. min to 0.048 in. max thickness, contains 3 holes with 0.196 in. dia
01-214-7222
Mounting Bracket
Aluminum alloy clad 2024-T3 per qq-a-250/5, 0.032 in. stock thickness, center section contains a location for for 0.125 in. dia rivet, contains 2 legs each bent down 72.0 degrees, each leg contains 2 tabs on both sides bent down 90.0 degrees, each leg contains a tab at the end bent up 70.7 degrees, the tabs at each end contain a hole, 0.220 in. min to 0.226 in. dia
01-214-7233
Mounting Bracket
Used on u/o eng mtd throttle control pn 14-50788-3 for 1f-5e acft. matl cres 17-7ph; 6.500 in. lg; 5 holes eq sp within 0.010 in.; 2 holes 0.207 in. dia, 6.025 in. apart to assemble w/14-50736
01-214-7240
Mounting Bracket
Used on acft eng f100-pw-220. 2 holes 0.276-0.286 in. dia
01-214-7306
Detent Plunger
01-214-7345
Rod End Clevis
01-214-7490
Retaining Strap
2.640" overall length 0.600" overall width 0.063" material thickness 2 holes in arch 1.500 in. c to c straight arch
01-214-7491
Retaining Strap
1.640" overall length 0.354" overall width 0.010" material thickness passivate surface treated tapered arch
01-214-7492
Retaining Strap
1.830" overall length 0.354" overall width 0.010" material thickness passivate surface treated tapered arch
01-214-7815
Double Angle Bracket
01-214-7941
Angle Bracket
Angle
01-214-7942
Angle Bracket
Angle
01-214-7943
Angle Bracket
Angle
01-214-7944
Angle Bracket
First leg has two spacers secured to its outside surf; second leg has a nut spacer, plate with floating nut secured to its inside surf angle
01-214-7945
Angle Bracket
2nd leg contains a floating nut plate angle
01-214-7946
Double Angle Bracket
Irregular triangular shape with two 0.213 in. min 0.224 in. max dia mounting holes spaced 1.000 in. apart; at the apex a nut spacer, plate with floating nut is fastened to the inside surf offset double angle
01-214-8094
Manual Control Handle
11.625 in. lg; 0.812 in. w; 1.000 in. h; 0.188 in. dia hole for pivot pin
01-214-8116
Bow Handle
2b thread class 6.220" overall length 32 thread quantity per inch oval handle anodize handle surface treated round unf thread series
01-214-8117
Bow Handle
2b thread class 6.250" overall length 32 thread quantity per inch anodize handle surface treated round unc thread series
01-214-8118
Turnbuckle Body
3b body thread class unjf body thread series
01-214-8159
Threaded Spacing Standoff
Left internal
01-214-8160
Threaded Spacing Standoff
Left internal
01-214-8161
Threaded Spacing Standoff
01-214-8162
Threaded Spacing Standoff
Projection one end left internal thread
01-214-8219
Solid Plain Disk
01-214-8222
Retaining Strap
4.520" overall length 1.120" overall width 0.060" material thickness curved arch
01-214-8223
Strap Fastener Loop
0.312" hole diameter 2.750" overall length passivate surface treated offset
01-214-8224
Padlock Set
Chromium shackle surface treated
01-214-8225
Bumper
Fastening device: 5.50 in. lg by 1.19 in. w steel retainer
01-214-8226
Synchro Clamp
2 thread class 56 thread quantity per inch q length: 0.350 in. ; height: 0.170 in. ; width: 0.187 in. ; mounting hole diameter: 0.086 in. ; lock leg length: 0.195 in. ; lock leg width: 0.050 in. chromate surface treated unc thread series
01-214-8339
Mounting Bracket
Consists of p/n 912159-100 made of 0.375 in. thk aluminum 6061-T6 qq-a- 250/11; p/N9s 912159-2, 912159-3, 912159-4, 912159-5 made of 0.250 in. thk aluminum 6061-T6 qq-a-250/11; p/n 912159-6 made of 1.00 x 0.620 x 0.125 aluminum angle 6061-T6 qq-a-200/8; p/n 912159-7 made of neoprene rubber mil std 417 class sc ty s gr 405
01-214-8433
Threaded Spacing Standoff
Left internal
01-214-8434
Threaded Spacing Standoff
Post, electrical-mechanical equipment
01-214-8435
Threaded Spacing Standoff
01-214-8438
Protective Dust And Moi Cap-plug
