01-213-8560
Loop Clamp
0.294" inside diameter 0.500" overall width anodize surface treated
01-213-8562
Retaining Strap
1.200" overall length 0.900" overall width 0.115" material thickness
01-213-8620
Mounting Bracket
Used on ge f-110 400 engine.
01-213-8624
Double Angle Bracket
01-213-8720
Expansion Shield
01-213-8721
Protective Dust And Moistur Plug
01-213-8727
Retaining Strap
01-213-8728
Webbing Strap
01-213-8729
Flush Catch
Mounting base length: 5.500 in. ; mounting base width: 4.250 in.
01-213-8731
Bumper
0.245" hole diameter 2.750" overall length 1.000" overall width
01-213-8732
Bumper
0.367" hole diameter
01-213-8747
Drawer Extension Slide Section
Mtg method:bolt hole or screw hole chromate slide surface treated
01-213-8833
Angle Bracket
01-213-8836
Double Angle Bracket
01-213-8896
Angle Bracket
1 hole 0.743 in. min angle
01-213-8897
Angle Bracket
Angle
01-213-8898
Angle Bracket
Nut plate located on first leg; 2 nut plates located on second leg angle
01-213-8899
Angle Bracket
Nut plate attached with rivets on each leg angle
01-213-8900
Angle Bracket
2 csk holes 0.098 in. min 0.102 in. max dia located on second leg; nut plate located on second leg angle
01-213-8901
Angle Bracket
Nut plate located on both legs angle
01-213-8902
Angle Bracket
1st leg has nut plate rivited on angle
01-213-8903
Angle Bracket
Angle
01-213-8904
Angle Bracket
2nd leg has nut plates mounted at holes angle
01-213-8905
Angle Bracket
Angle
01-213-8906
Angle Bracket
Angle
01-213-8907
Angle Bracket
Nut plate located on both legs angle
01-213-8908
Angle Bracket
Nut plate riveted onto second leg; 2 hols csk 0.098 in. min 0.102 in. max located on second leg; nut plate also located on first leg angle
01-213-8909
Angle Bracket
2nd leg has clip attached w/rivets angle
01-213-8912
Double Angle Bracket
Nut plate rivited to 2nd leg double angle
01-213-8913
Double Angle Bracket
Double angle
01-213-8914
Double Angle Bracket
Double angle
01-213-8981
Butt Hinge Leaf
0.950" overall length 0.062" material thickness right hand; pin extends 0.300 in. from end of hinge; pin chamfered 0.060 in., 45.0 degrees butt parrallel holes end knuckles
01-213-8984
Threaded Spacing Standoff
Chromate surface treated projection both ends
01-213-9002
Expansion Plug
01-213-9460
Mounting Bracket
01-213-9667
Protective Dust And Moi Cap-plug
01-213-9668
Protective Dust And Moi Cap-plug
01-213-9669
Threaded Snap-in Standoff
Passivate surface treated left internal
01-213-9781
Rod End Connector
01-213-9882
Protective Dust And Moisture Cap
01-213-9883
Protective Dust And Moistur Plug
01-213-9901
Double Angle Bracket
Adjacent angles
01-213-9902
Angle Bracket
01-213-9903
Angle Bracket
01-213-9905
Angle Bracket
