01-205-7591
Threaded Spacing Standoff
Nuclear hardness critical; material is butadiene acrylonitrile which is 40 percent carbon reinforced nylon with tensile strength 30000 psi min.; flexure modulus 50000 psi min.; heat deflector temperature 485deg f min.; izod impact 10 ft lb per in min. projection one end left internal thread
01-205-7593
Threaded Spacing Standoff
Rubber vulcanized to create nuclear hardness critical characteristic
01-205-7598
Threaded Spacing Standoff
0.360" thread length nuclear hardness critical; material is butadiene acrylonitrile which is 40 percent carbon reinforced nylon with tensile strength 30000 psi min.; flexure modulus 50000 psi min.; heat deflector temperature 485deg f min.; izod impact 10 ft lb per in min. left internal thread
01-205-7599
Threaded Spacing Standoff
Material is butadiene acrylonitrile which is 40 percent carbon reinforced nylon with tensile strength 30000 psi min.; flexure modulus 50000 psi min.; heat deflector temperature 485deg f min.; izod impact 10 ft lb per in. min.; approx size 2.660 by 0.95 by 0.72"
01-205-7600
Threaded Spacing Standoff
Peacekeeper missile is e/i
01-205-7614
Angle Bracket
2nd leg contains 1 nutplate, p/n MS21062L3 angle
01-205-7776
Helical Compression Spring Seat
0.6340" bore diameter passivate surface treated seat
01-205-7777
Helical Compression Spring Seat
0.2160" bore diameter seat
01-205-8013
Access Door Hinge
01-205-8031
Angle Bracket
Nut, pn 2503695-7, qty 2, iaw mil-m-25027, atch to 1st leg; nut dia andleg style per pacs ahlk oxide film surface treated angle
01-205-8049
Resilient General Purpose Mount
Lacquer holder surface treated
01-205-8127
Rod End Clevis
01-205-8147
Angle Bracket
01-205-8148
Angle Bracket
01-205-8149
Angle Bracket
Dimensions
01-205-8209
Access Cover
Four holes
01-205-8295
Mounting Bracket
Used on acft engine f100-pw-220. parts include p/ns 4058918
01-205-8296
T Bracket
Used on acft engin f100-pw-220. assy includes cushion, p&w bracket option, orig dwg name; bracket-assy of center projection
01-205-8350
Double Angle Bracket
Used on an/frn-43,44,vortac. item consists of 1 channel p/n 508479-1; 1 bearing p/n 505766; 2 pins, spring-tubular, slotted, cres, 0.062 dia, by 0.250 long p/n MS16562-190; 2 nuts, plain, clinch, cres, 0.112-40; p/n M45938-1-5c spec no. mil-n-45938/1; 1 pin, spring-tubular, slotted, cres 0.156 dia. by 0.500 in. long, nha-p/n 105421 adjacent angles
01-205-8406
Drawer Extension Slide Section
Contains 6 mounting holes, 0.169 in. min to 0.175 in. max dia
01-205-8507
Rod End Clevis
3b rod connection thread class 0.190" hole diameter clevis unf rod connection thread series
01-205-8553
Threaded Spacing Standoff
0.200" right external thread length contains a counterbore, 0.358 in. largest diameter, also contains a groove around right end, 0.094 in. min to 0.104 in. max width passivate surface treated
01-205-8590
Helical Compression Spring Seat
01-205-8833
Threaded Spacing Standoff
Cadmium or chromate surface treated internally threaded full length
01-205-8969
Retaining Clip
01-205-8974
Expansion Plug
01-205-9021
Butt Hinge Leaf
01-205-9022
Butt Hinge Leaf
01-205-9039
Corrosion Preventive Anode
01-205-9066
Solid Plain Disk
01-205-9256
Mending Plate
7.250" overall length 4.500" overall width 0.250" material thickness has five 0.312 in. min, 0.317 in. max wide by 0.625 in. min, 0.635 in. max long slots paint surface treated rectangular
01-205-9258
Mending Plate
4.000" overall length 0.840" overall width 0.120" material thickness anodize surface treated rectangular
01-205-9259
Angle Bracket
Six countersunk holes 0.096 in. min, 0.101 in. max dia, 100.0 degrees x 0.165 in. paint surface treated angle
01-205-9262
Angle Bracket
Color forest green; second leg bent 2 places at 45.0 degrees enamel surface treated angle
01-205-9263
Angle Bracket
Color forest green enamel surface treated angle
01-205-9301
Access Cover
0.375" hole diameter
01-205-9304
Access Cover
2 lower corners of top rounded to corner radius of 0.030 in. min, 0.060 in. max; cover has 2 pins, 1 on each side, each 0.500 in. lg; 0.040 in. dia tin surface treated
01-205-9349
Loop Clamp
0.500" overall width 0.046" material thickness single loop
01-205-9350
Loop Clamp
0.500" overall width 0.0295" material thickness
01-205-9352
Loop Clamp
0.500" overall width 0.071" material thickness passivate band surface treated offset mount
01-205-9436
Block Clamp
Rubber, buna n; 88.5 mm lg; 25.0 mm width; 32.0 mm h; 2 mtg holes 13.8 mm dia; c to c of mtg holes 63.5 mm; tube opening 22.0 mm dia
01-205-9444
Drawer Extension Slide Section
01-205-9445
Drawer Extension Slide Section
