01-204-0933
Access General Purpose Door
01-204-1069
Angle Bracket
Angle
01-204-1131
Loop Clamp
0.500" overall width 0.064" material thickness
01-204-1241
Butt Hinge Leaf
3.750" overall length 0.090" material thickness mtg holes csk 100 deg by 0.228 in. porm 0.005 in. butt parallel holes
01-204-1291
Retaining Strap
01-204-1292
Retaining Strap
01-204-1716
Bumper
W/1.102 hex head
01-204-2008
Spring Holder
01-204-2043
Mending Plate
01-204-2199
Angle Bracket
01-204-2200
Angle Bracket
Passivate surface treated angle
01-204-2225
Access Cover
Relief hole in each corner; 0.060 in. dia, 4 mtg studs 3.562 in. apart, one in each corner, spring enamel lusterless surface treated
01-204-2300
Bridge Clamp
2.750" overall length 1.250" overall width offset
01-204-2301
Bridge Clamp
2.750" overall length 0.750" overall width offset
01-204-2409
Resilient General Purpose Mount
Cotton plastic
01-204-2458
Butt Hinge Leaf
01-204-2459
Butt Hinge
0.125" material thickness butt
01-204-2503
Threaded Spacing Standoff
Left internal
01-204-2533
Protective Dust And Moisture Cap
01-204-2534
Protective Dust And Moi Cap-plug
01-204-2535
Solid Plain Disk
01-204-2541
Catch Strike
1.380" overall length 1.180" overall width zinc surface treated
01-204-2544
Lock-release Lever
Matl-alum. alloy mil-a-21180, cl 12, A356 anodize surface treated
01-204-2545
Pawl Fastener
Zinc surface treated
01-204-2546
Spring Tension Clip
01-204-2552
Bumper
0.250" hole diameter furnished w/metal insert
01-204-2554
Synchro Clamp
Chromate surface treated
01-204-2559
Barrel Bolt
Chromium plate surface treated
01-204-2560
Furniture Glide
0.350" overall length
01-204-2580
Mounting Bracket
Used on howitzer medium self-propelled,155-mm; nsn 2350-00-485-9662; model m109a1. 22.0" long
01-204-2584
Mounting Bracket
Used on truck 1-1/4 ton,pccn chmmwv. steel weldment; 1st leg 6.720 insh; 5.710 ins w; 1st leg has 4 slotted holes 0.781 ins w by 1.250 ins lg; 2ndleg 5.710 ins w at base, 3.500 ins w at outer edge; 1.750 ins lg; 2nd leg has 2 holes 0.531 ins dia; 1 reinforcement plate p/n 5579689, fscm 34623 attached; 1 u shaped tie down bar attached, p/n 5584225-b, fscm 34623
01-204-2586
Mounting Bracket
Used on tank,combat full trk m1. item consists of pad p/n 12337892cage 19207; gusset p/n 12337890 cage 19207; bracket p/n 12337891 cage 19207; support p/n 12337893 cage 19207
01-204-2682
Mounting Bracket
Used on M1A1. item c/o pin, swivel-12304775 bracket-12304767
01-204-2684
Spring Holder
Anodize surface treated
01-204-2690
Angle Bracket
Second leg has 4 holes 0.672 in.dia. phosphate surface treated angle
01-204-2691
Loop Clamp
0.360" overall width
01-204-2692
Loop Clamp
Used on M1E1.
01-204-2694
Double Angle Bracket
Phosphate surface treated double angle
01-204-2701
Access Cover
Cover comes with 3 plugs each made from tool steel type 06 per qq-t-570and each plug is coated with black oxide per mil-c-13294 class 1; 1 plug hashead outside dia of 1.82in; 1 plug hashead outside dia of 2.30in; last plug has head outside dia of 5.25in; large plug held by 2 screws anodize surface treated
01-204-2705
Synchro Clamp
2b thread class 0.500" hole diameter mounting hole counterbored 0.531 inch dia by 0.50 inch deep; locking leg has 2 threaded holes 3/8-16unc-2b counterbored to a dia of 0.422 inch by 0.56 inch deep phosphate surface treated unc thread series
01-204-2711
Rod End Clevis
Used on steel, lg, 0.309in. nom sha end radius, 0.187in pivot pinhole ctr to arm thk, 0.438in. no dia, 0.2510 in. nom; end item b-1se 30"ejector.
01-204-2934
Access Cover
Used on aircraft model av-8. 0.196" hole diameter 8.080" outside diameter
01-204-2993
Rod End Clevis