01-198-8769
Protective Dust And Moistur Plug
01-198-8771
Retaining Strap
01-198-8772
Retaining Strap
3.380" overall length 2.600" overall width item has 4 mounting holes; item comes with 4 nut, plain, clinches part number M45938/1-13c chromate surface treated
01-198-8865
Pad Eye
1.250" overall width tab
01-198-8922
Manual Control Handle
Material:steel, investment casting, composition ic-303 solution heat treated spec mil-s-81591; 3.682 in.lg; 0.750 in.w; 2.130 in.h;
01-198-8949
Synchro Clamp
01-198-9014
Access Cover
Used on ab fuel control 7113m19 for f110-ge-100 acft eng. 0.497" inside diameter 0.216" hole diameter body 1.265 in. h; 0.934, 0.997, 1.059 o.d. ea w/seal groove 0.824 - 0.827 in. dia, 0.887 - 0.890 in. dia, 0.951 - 0.954 in. dia, surface finish 63 microinch
01-198-9015
Access Cover
Used on b1-b;an/alq-161a.
01-198-9463
Bow Handle
3.500" overall length
01-198-9509
Access Cover
Used on 2410-01-139-9859 tractor,full trackked. 2.760" inside diameter 0.406" hole diameter
01-198-9510
Access Cover
Used on caterpillar control assembly.
01-198-9681
Angle Bracket
Angle
01-198-9745
Nut And Bolt Locking Plate
Socket
01-199-0185
Rod End Clevis
Used on items peculiar to fms only.
01-199-0207
Helical Compression Spring Seat
01-199-0208
Helical Compression Spring Seat
Item is landing gear specific
01-199-0327
Access General Purpose Door
Used on lgm-30 minuteman.
01-199-0452
Mounting Bracket
Used on j85-5/13 engine. rmake from p/n 5020T80P01, 2.100 in. min to 2.140 in. max length, 0.790 in. min to 0.810 in. max width, 0.710 in. min to 0.730 in. max ht, contains 4 threaded mounting holes, 0.640-32 unjc-3b threads
01-199-0453
Mounting Bracket
Used on w/s: engine, aircraft, j85-ge-5/13 (f-5a/b, t-38a); aircraft, t-38; engine, aircraft, j69-t-25 (t-37b). 1.790 in. min to 1.820 in. max length, 1.210 in. min to 1.230 in. max ht
01-199-0550
Angle Bracket
Angle
01-199-0551
Mounting Bracket
Used on u/o f110 eng; e/i f16 c-d acft. matl steel AMS5599; 5.000 in. lg; 0.100 in. thk; 2 holes 0.281 in. dia 4.009 in. apart; 2 holes 0.281 in. dia 2.364 in. apart
01-199-0552
Mounting Bracket
Used on u/o f110 eng; e/i f16 c-d acft. matl steel AMS5599; matl of mtg steel AMS5666 or AMS5599; 4 holes 0.100 in. dia csk 100.0 deg; 2 holes 0.250 in. dia thru; 0.063 in. thk
01-199-0553
Mounting Bracket
Used on u/o f110 eng; e/i f16 c-d acft. matl steel AMS5599; 0.747 in. h; 0.063 in. thk; 2 holes 0.281 in. dia; 1 hole 0.218 in. dia
01-199-0562
Mounting Bracket
Used on f-110 acft engine. 0.070 in. base thickness, contains 4 holes, 0.234 in. min to 0.240 in. max hole diameter
01-199-0634
Detent Plunger
01-199-0801
Plug Button
Cadmium surface treated standard
01-199-0836
Access Cover
Used on an/alq-117.
01-199-0929
Mounting Bracket
01-199-0952
Bow Handle
Used on an/ggc-62(v)26.
01-199-1086
Webbing Strap
End item tropo
01-199-1216
Retaining Strap
0.250" material thickness
01-199-1242
Loop Clamp
0.688" overall width 0.030" material thickness single loop
01-199-1254
Nut And Bolt Locking Plate
01-199-1256
Threaded Spacing Standoff
0.250" left internal (includes thru thread) thread length left internal thread
01-199-1267
Access Cover
Sight glass includes frame, glass, gasket, 12 hex bolts 1/4-20 nc 0.875 in. long
01-199-1463
Loop Clamp
0.470" overall width 0.020" material thickness passivate band surface treated right hand clamp & bracket
01-199-1633
Threaded Spacing Standoff
Left internal
01-199-1634
Threaded Spacing Standoff
Left internal
01-199-1655
Nut And Bolt Retainer
1.796" overall length 1.183" overall width 0.067" material thickness passivate surface treated anchor
01-199-1659
Retaining Strap
4.006" overall length 0.500" overall width 0.064" material thickness cadmium surface treated straight arch
01-199-1660
Retaining Strap
4.006" overall length 0.500" overall width 0.064" material thickness cadmium surface treated straight arch
01-199-1662
Webbing Strap
01-199-1663
Webbing Strap
