01-190-5103
Synchro Clamp
01-190-5117
Helical Compression Spring Seat
0.1250" bore diameter anodize surface treated seat
01-190-5196
Electronic Equipmen Hardware Kit
01-190-5530
Dust And Moisture Seal Boot
Used on uh-60 turbine engine, rotary wing aircraft.
01-190-5607
Mounting Bracket
2.625 in. lg; 2.000 in. w; 1.125 in. h; 4 mounting holes, 0.203 in. dia.located 0.344 in. from each end; distance across holes 1.375 in; cadmium plate finish, type ii class 2 spec qq-p-416
01-190-5716
Helical Compression Spr Retainer
01-190-5717
Helical Compression Spr Retainer
01-190-5859
Access Cover
Used on andale co. 6 in. duplex strainer model number 103 bm.
01-190-5862
Access Cover
Primer surface treated
01-190-5915
Dust And Moisture Seal Boot
Used on m1 tank family. boot (heat shrinkable, strain relief, convoluted) material elastomeric polymer, crosslinked, raychem rt-1321 or equal thru-hole, expandable
01-190-5996
Double Angle Bracket
Used on b-1b aircraft. passivate surface treated adjacent angles
01-190-6160
Butt Hinge Leaf
5.250" overall length material is per astm A148, GR105-85 or 120-95; enamel is not to be painted inside of slot; enamel is per mil-e-52798, mil-e-52835, forest green, or mil-e-52798, forest green, modified for corrosion resistance for which prior paint validation is required per mil-e-52798; surface roughness is 125.000 microinches after plating
01-190-6162
Rod End Connector
01-190-6202
Threaded Spacing Standoff
01-190-6244
Pipe Hanger
Split ring
01-190-6245
Pipe Hanger
Split ring
01-190-6246
Pipe Hanger
Split ring
01-190-6254
Rim Latch
Material is 4130 or 8630, per ASTMA322 or A331; surface treatment is perqq-c-320, class 2c; heat treatment: quench chromium case surface treated
01-190-6255
Flush Catch
Matl:bracket steel, rivet steel, bolt alum. alloy, button bolt alum. alloy, button trigger alum. alloy, gasket syn rubber; s/treatment:rivet pass., bracket cadmium; button bolt anodize bolt surface treated
01-190-6266
Drawer Extension Slide
01-190-6741
Angle Bracket
2nd leg has 5 holes-2 are located 0.560 in. from edge to hole c along width angle
01-190-6750
Threaded Spacing Standoff
Used on an/alr-56c. 2a right external thread class right-hand left internal (includes thru thread) 0.250" left internal (includes thru thread) thread length 40 left internal (includes thru thread) thread quantity per inch passivate standoff surface treated flanged with left internal thread unc left internal (includes thru thread) thread series
01-190-6766
Access Cover
0.473" hole diameter
01-190-7266
Bow Handle
12.375" overall length passivate surface treated unc thread series
01-190-7415
Retaining Clip
01-190-7424
Expansion Plug
01-190-7425
Expansion Plug
Used on 2420-66-148-7692, hmee (high mobility engineer excavator); rg-31 mrap.
01-190-7540
Detent Plunger
01-190-7541
Detent Plunger
01-190-7637
Mending Plate
2.460" overall length 0.500" overall width 0.056" material thickness each end has a 0.500 in. radius rectangular
01-190-7638
Mending Plate
2.150" overall length 0.500" overall width 0.056" material thickness each end has a 0.500 in. radius rectangular
01-190-7639
Mending Plate
2.438" overall length 1.875" overall width 0.750" material thickness has one 0.250 in. by 45.0 deg chamfered edge rectangular
01-190-7640
Mending Plate
7.630" overall length 1.500" overall width 1.000" material thickness 0.375-24-unf-2b, counterbore far side 0.500 in. dia 1.250 dp enamel surface treated rectangular
01-190-7677
Loop Clamp
0.500" overall width 0.051" material thickness multiple loop
01-190-7683
Electronic Equipmen Hardware Kit
01-190-7716
Threaded Spacing Standoff
Left internal
01-190-7726
Protective Dust And Moisture Cap
01-190-7727
Retaining Strap
01-190-7728
Retaining Strap
0.745" overall length 0.235" overall width 0.017" material thickness straight arch
01-190-7729
Retaining Strap
01-190-7731
Retaining Strap
2.446" overall length 0.500" overall width 0.051" material thickness rectangular shape saddle arch
01-190-7732
Retaining Strap
2.070" overall length 0.500" overall width 0.040" material thickness rectangular shape passivate surface treated saddle arch
01-190-7733
Retaining Strap
5.441" overall length 0.500" overall width 0.064" material thickness anodize surface treated saddle arch
01-190-7736
Beam Gripping Clamp
