01-185-1846
Drawer Extension Slide Section
Alum alloy qq-a-200/2 alloy 2014-T6; anodize mil-a-8625 ty 2; cl 1; 30.000 in.max lg; 1.850 in.w; document data:83508-B001-21-0218-40-2;
01-185-1954
Loop Clamp
0.375" overall width 0.025" material thickness two brackets attached to od; four spurs, wire loop passivate surface treated
01-185-2058
Retaining Strap
01-185-2059
Retaining Strap
01-185-2067
Swivel Caster
Swivel offset
01-185-2085
Mending Plate
01-185-2124
Angle Bracket
Right hand bracket chromate surface treated angle
01-185-2125
Angle Bracket
Left hand bracket chromate surface treated angle
01-185-2127
Angle Bracket
01-185-2128
Angle Bracket
01-185-2143
Recess Handle
2b thread class 8.790" overall length 0.620" overall width two drilled holes, center-to-center distance between holes 7.000 in.; 0.185 in. min, 0.190 in. max diameter through; C9bore at one end 0.120 in. deep to 0.302 in. min, 0.327 in. max diameter; C9bore at opposite end o.120 in. deep to 0.240 in. min, 0.265 in. max diameter anodize surface treated unc thread series
01-185-2170
Access Cover
0.562" hole diameter cover has two 11.500 in. by 6.000 in. openings; has twenty studs welded in place
01-185-2268
Angle Bracket
01-185-2269
Angle Bracket
01-185-2270
Angle Bracket
01-185-2271
Double Angle Bracket
01-185-2306
Access Cover
Used on hemtt family (heavy expanded mobility tactical trucks). 0.250" hole diameter
01-185-2375
Loop Clamp
0.500" overall width 0.051" material thickness center mount
01-185-2376
Loop Clamp
0.625" overall width 0.051" material thickness right hand clamp & bracket
01-185-2876
Angle Bracket
Used on combustion assy of kc135r f108-cf-100 engine. ALS0 consists of 2 spacrs angle
01-185-2877
Angle Bracket
Used on core assy of kc135r f108-cf-100 engine. 1st leg has cutout arch ctrd separating the 4 holes in 2 sets angle
01-185-2878
Angle Bracket
Used on modulator rf mid,an/alq 184. 2nd leg has tab with 90 deg angle creating 3rd leg 0.550 in. by 0.750 in. w 1 hole 0.165-0.171 in. dia chromate surface treated angle
01-185-2879
Angle Bracket
Chromate surface treated angle
01-185-2908
Access Cover
0.212" hole diameter four outside holes countersunk 82 degrees to 0.420 in. dia; four inside holes 0.165 in. min
01-185-2909
Access Cover
Used on an/alq-184.
01-185-2940
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
01-185-2941
Loop Clamp
0.500" overall width 0.032" material thickness passivate band surface treated rectangular
01-185-2942
Loop Clamp
1.810" overall length 0.240" overall width 0.063" material thickness 1.060 in. lg cushion chromate band surface treated single loop
01-185-3047
Rim Latch Set
Case wdth 0.540 in.; case lgth 4.000 in.; case hgt 1.410 in.
01-185-3180
Angle Bracket
01-185-3181
Angle Bracket
01-185-3184
Angle Bracket
01-185-3185
Angle Bracket
01-185-3186
Angle Bracket
01-185-3196
Spring Tension Clip
01-185-3281
Protective Dust And Moisture Cap
