00-012-0194
Swivel Caster
Swivel offset
00-012-0245
Straight Headless Rod
One end offset 0.150 in. by 0.620 in. lg
00-012-0246
Straight Headless Rod
00-012-0332
Escutcheon Plate
Matl, any acceptable
00-012-0359
Retaining Clip
Pin
00-012-0477
Drawer Extension Slide
Anodize surface treated
00-012-0545
Loop Clamp
0.312" overall width 0.050" material thickness cadmium surface treated single loop
00-012-0548
Loop Clamp
0.450" overall width 0.050" material thickness single loop
00-012-0555
Bow Handle
2.250" overall length passivate surface treated unc thread series
00-012-0589
Protective Dust And Moisture Cap
00-012-0592
Bow Handle
2.750" overall length chromium surface treated
00-012-1018
Straight Headless Rod
00-012-2249
Bumper
Machine screw
00-012-2355
Angle Bracket
Angle
00-012-4338
Rim Lock
Bolt type:single bevel reversible; master key provision:not included;
00-012-4598
Angle Bracket
Cadmium surface treated angle
00-012-5197
Protective Dust And Moistur Plug
2a thread class
00-012-5432
Synchro Clamp
00-012-5434
Synchro Clamp
0.128" hole diameter
00-012-5647
Solid Plain Disk
00-012-5684
Clip Retainer Plate
2.250 in. dia
00-012-5922
Angle Bracket
Anodize surface treated angle
00-012-6699
Spring Holder
Used on pump assembly p/n 144-1573 on lgm-30 minuteman missile.
00-012-6772
Spring Holder
Used on auxilliary power supply pump on lgm-30 missile.
00-012-6787
Spring Holder
Used on auxilliary power supply pump,lgm-30 missile.
00-012-6852
Spring Holder
Used on pump subassembly p/n 144-2072 on lgm-30 missile.
00-012-7230
Mounting Bracket
Zconsists of 1 bracket made from stainless steel per ams 5510, 2 gussets made from stainless steel per ams 5510, 1 boss made from stainless steel per ams 5645, 3 self-locking nuts, p/n 3008M92P1, 2 rivets, p/n AN123475, 4 rivets, p/n AN123474
00-012-7320
Helical Compression Spr Retainer
Irregular
00-012-7813
Threaded Spacing Standoff
Hole 0.125 in. distance from end, 0.040 in. dia, chamfer 0.005 in. to 0.010 in. by 45 degrees both ends with 0.005 radius both ends projection both ends
00-012-7819
Threaded Spacing Standoff
Left internal
00-012-7821
Threaded Spacing Standoff
Projection one end left
00-012-8397
Lock-release Lever
00-013-3447
Retaining Strap
3.790" overall length 0.470" overall width 0.057" material thickness polytetrafluoroethylene impregnated asbestos reinforced with wire double arch
00-013-3451
Retaining Strap
3.060" overall length 0.470" overall width 0.230" material thickness one mtg end sloped downward 60 deg, cushioning material polytetrafluoroethylene impregnated asbestos reinforced with wire multiple arch
00-013-3455
Retaining Strap
3.060" overall length 0.470" overall width 0.057" material thickness one mtg end turned upward 60 deg, cushioning material polytetrafluoroethylene impregnated asbestos reinforced with wire multiple arch
00-013-3467
Angle Bracket
Welded assembly angle
00-013-3472
Angle Bracket
Welded assembly, 1st leg consists of 3 separate tabs, the 2 outside tabs are 0.680 in. min to 0.720 in. max wide, inside tab is 0.920 in. min to 0.940 in. max wide, all 3 tabs have holes with 0.219 in. dia, 2nd leg contains 4 holes, 0.344 in. hole diameter angle
00-013-3638
Helical Compression Spring Seat
0.3040" bore diameter matl-steel mil-s-7420, comp E52100; not casehardened seat
00-013-3659
Helical Compression Spring Seat
00-013-3703
Helical Compression Spring Seat
Not casehardened
00-013-3806
Helical Compression Spr Retainer
End hole thd 0.164 nf-3b
00-013-4214
Retaining Strap
7.578" overall length 0.562" overall width worm drive screw included for tightening tapered arch
00-013-5514
Retaining Strap
00-013-7703
Angle Bracket
Angle
