01-178-3367
Angle Bracket
1st leg is split to give the appearance of an extra leg each containing a nut-plate angle
01-178-3369
Angle Bracket
Plastic polyurethane surface treated angle
01-178-3370
Double Angle Bracket
2nd leg contains a nut-plate double angle
01-178-3371
Double Angle Bracket
2nd leg contains a nut-plate double angle
01-178-3379
Threaded Spacing Standoff
01-178-3398
Loop Clamp
One end contains a rivet running thru a 0.127 in. min to 0.133 in. max dia hole, other end contains a hole with a 0.144 in. min to 0.150 in. max radius
01-178-3399
Loop Clamp
One end contains a rivet running thru a 0.127 in. min to 0.133 in. max dia hole, contains another hole thru with a 0.144 in. min to 0.150 in. max radius, F118 engine qualified
01-178-3400
Loop Clamp
7clamp contains 3 inside loops, 0.375 in. 1st loop dia, 0.250 in. 2nd loop dia, 0.375 in. 3rd loop dia, contains a rivet at one end running thru a 0.156 in. min to 0.166 in. max hole dia, contains 2 mounting holes, 0.231 in. min to 0.239 in. max hole dia
01-178-3401
Loop Clamp
Contains a rivet running thru a 0.156 in. min to 0.166 in. dia hole
01-178-3402
Loop Clamp
Used on zw/s: aircraft, f-16; engine, aircraft, f110-ge-100/129 (f-16c/d); aircraft, b-2 bomber (atb); u-2 airframe; u-2 engine (f118-ge-101); engine, aircraft f110-ge-400; engine, f118-ge-100 (b-2 bomber); engine, aircraft, f101-ge-102 (b-1). one end contains a rivet running thru a 0.127 in. min to 0.133 in. max dia hole, contains another hole thru with a 0.206 in. min to 0.212 in. max radius
01-178-3403
Loop Clamp
One end contains a rivet running thru a 0.127 in. min to 0.133 in. max dia hole, other end contains a hole with a 0.206 in. min to 0.212 in. max radius
01-178-3482
Double Angle Bracket
Adjacent angles
01-178-3483
Double Angle Bracket
Adjacent angles
01-178-3496
Mounting Bracket
01-178-3541
Butt Hinge
9.250" overall length 0.032" material thickness butt
01-178-3542
Rod End Clevis
0.312" hole diameter 0.344" overall width zinc surface treated clevis
01-178-3654
Resilient Mount Plate
01-178-3669
Threaded Spacing Standoff
Left internal
01-178-3732
Angle Bracket
First leg has one 0.750 in. nom by 45.0 deg chamfered corner angle
01-178-3733
Angle Bracket
01-178-3734
Angle Bracket
First leg has nine holes angle
01-178-3735
Angle Bracket
01-178-3736
Double Angle Bracket
01-178-3746
Access Cover
0.344" hole diameter 4.000" outside diameter
01-178-3747
Loop Clamp
1.250" overall width 0.188" material thickness
01-178-3753
Retaining Strap
1.120" overall length 0.690" overall width 0.500" material thickness
01-178-3756
Block Section Clamp
01-178-3759
Bow Handle
5.315" overall length 0.125 in. dia hole in each end of handle
01-178-3764
Helical Compression Spr Retainer
Irregular
01-178-3765
Nut And Bolt Locking Plate
01-178-3769
Spring Tension Clip
01-178-3770
Spring Tension Clip
01-178-4699
Hand Crank
Used on generator,model 1113,fscm 25778.
01-178-4929
Compression Cup
Used on 3810-00-859-2404.
01-178-4948
Access Cover
8.750" outside diameter
01-178-5033
Angle Bracket
01-178-5163
Electronic Equipmen Hardware Kit
01-178-5202
Dust And Moisture Seal Boot
2.656" overall length 3.718" overall width 0.050" material thickness
01-178-5203
Dust And Moisture Seal Boot
1.250" overall length 1.500" overall width 0.050" material thickness
01-178-5403
Mounting Bracket
Used on 2350-00-808-7100. 15.500" overall length
01-178-5424
Access General Purpose Door
01-178-5432
Manual Control Lever
01-178-5492
Angle Bracket
Angle
01-178-5493
Mounting Bracket
Used on recovery vehicle,m51/m74/m88. aluminum matl; 0.125 in. thk; irregular shaped; two mounting tabs each havind 0.500 in. dia hole
01-178-5495
Angle Bracket
Angle
01-178-5837
Retaining Strap
0.060" material thickness center section contains a nut-plate straight arch
