01-177-8693
Resilient General Purpose Mount
01-177-8757
Access Cover
Steel; 2.0 x 1.5 x 0.033 high
01-177-8764
Manual Control Handle
Used on mk 48-1 container.
01-177-8844
Mounting Bracket
Used on ah-64 series helicopter.
01-177-8975
Key Holder
Spring steel; zinc plated; 0.970 in.od; 0.802 in.id; 0.110 in.thk;
01-177-9217
Protective Dust And Moi Cap-plug
C/o end cap, pn 11785404
01-177-9218
Angle Bracket
Used on 1270-01-041-3767.
01-177-9240
Retaining Strap
3.250" overall length 1.750" overall width 0.1644" material thickness 2 0.281 in. dia. holes, 0.370 in. edge along w., 0.755 in. from edge along lg., 1.750 in. center to center; endsare square cadmium surface treated straight arch
01-177-9562
Dirt And Liquid Deflector
Used on centrifugal compressor,aircraft model p-3. 0.590" inside diameter 1.240" outside diameter 0.414" material thickness
01-177-9614
Bow Handle
6.500" overall length zinc surface treated
01-177-9688
Angle Bracket
01-177-9689
Angle Bracket
01-177-9690
Angle Bracket
01-177-9800
Mending Plate
01-177-9826
Threaded Spacing Standoff
2b left internal (includes thru thread) 2a right external thread class right-hand left internal (includes thru thread) 0.156" left internal (includes thru thread) 0.219" right external thread length 40 left internal (includes thru thread) thread quantity per inch cadmium standoff surface treated flanged with left internal thread unc left internal (includes thru thread) thread series
01-177-9897
Threaded Spacing Standoff
125000 psi min tensile strength left internal
01-177-9911
Protective Dust And Moistur Plug
Three grooves equally spaced around od along 1.000 in. lg
01-177-9918
Synchro Clamp
0.116" hole diameter center hole has 0.640 in. nom dia chromate surface treated
01-177-9935
Retaining Clip
Pin
01-178-0030
Angle Bracket
01-178-0037
Nut And Bolt Retainer
01-178-0039
Nut And Bolt Retainer
01-178-0110
Angle Bracket
01-178-0111
Angle Bracket
01-178-0112
Angle Bracket
Angle
01-178-0113
Loop Clamp
0.500" overall width 0.050" material thickness snap fastener this item has a snap lock offset mount
01-178-0125
Quick Release Plunger
Spring loaded, operate at -50 deg to +120 deg f
01-178-0149
Threaded Spacing Standoff
Second external thread characteristics 0.250 in. lg, 0.190-32 unf 2a left internal
01-178-0154
Drawer Extension Slide
01-178-0216
Angle Bracket
Used on c/kc 135 acft.
01-178-0218
Angle Bracket
2nd leg contains a nut-plate, 1st leg is split with 1 slot in each split angle
01-178-0219
Angle Bracket
Another leg is bent up along the 2nd leg to form a gusset joining the 1st angle
01-178-0220
Angle Bracket
1st leg contains a nut-plate, both legs 2 holes of unequal dia, 0.280 in. min to 0.287 in. max large hole dia, 0.098 in. min to 0.102 in. max small hole dia angle
01-178-0221
Angle Bracket
2nd leg contains 2 gussets that bend around to meet with the 1st leg angle
01-178-0222
Angle Bracket
2nd leg contains a nut-plate angle
01-178-0223
Angle Bracket
Both legs contain nut plates, 2ndleg contains a bend forming another leg angle
01-178-0224
Angle Bracket
1st leg contains a nut-plate angle
01-178-0225
Angle Bracket
1st leg contains a spacer, 2nd leg contains a nut-plate angle
01-178-0226
Angle Bracket
Enameled black smooth angle
01-178-0247
Access Cover
Used on c-130 aircraft.
01-178-0250
Access Cover
Used on f-15/f-16 acft age.. 2 flanges; each flange has 3 holes 0.281 in. dia, equally spaced 39.000 in. between each hole
01-178-0251
Access Cover
Used on 5840-00-825-6223,radar set,an/tps-43. 5.320" outside diameter
01-178-0252
Access Cover
Used on antenna indicator control on an/apq-160. 0.257" hole diameter center hole 2.625 in. dia, with 4 equally spaced holes on edge of center hole 0.113-0.119 in. dia; 4 turnlock studs included
01-178-0253
Access General Purpose Door
Used on agm-86b pylon fairing.
01-178-0254
Access General Purpose Door
Used on agm-86b pylon fairing.
01-178-0255
Access General Purpose Door
Used on agm-86b pylon fairing.
