00-146-2685
Vent Plug
0.687" outside diameter
00-146-2925
Pawl Fastener
Chromate surface treated t-handle
00-146-3098
Butt Hinge Leaf
2.960" overall length 0.135" material thickness butt parallel holes
00-146-3101
Angle Bracket
Anodize surface treated angle
00-146-3113
Angle Bracket
Angle
00-146-3114
Angle Bracket
Anodize surface treated angle
00-146-3198
Angle Bracket
00-146-3492
Spring Tension Clip
0.020" material thickness
00-146-4510
Access Cover
Used on compressor air hip.
00-146-5317
Access Cover
0.141" hole diameter seven holes of different sizes; one rectangle shaped hole irregularly spaced plus two mtg holes all on top; drawing of parts layout on all four sides on inside surface only anodize surface treated
00-146-5363
Double Angle Bracket
Gloss yellow color oxide film or paint or primer surface treated double angle
00-146-7081
Loop Clamp
0.500" overall width 0.051" material thickness rectangular
00-146-7464
Helical Compression Spring Seat
00-146-7653
Angle Bracket
Green no. 611 ana bulletin no. 157, righthand offset chromate zinc surface treated offset angle
00-146-7654
Angle Bracket
Anodize surface treated angle
00-146-7891
Spring Holder
00-146-7892
Spring Holder
00-146-8893
Key Blank
Steel, nickel plated, 0.049 in. thk, 0.300 in. w
00-146-9447
Access Door Hinge
00-146-9574
Synchro Clamp
Mounting hole 0.250 in. by 0.625 in. cadmium surface treated
00-146-9861
Rod End Clevis
Used on F-5.
00-147-0046
Cushioning Pad
00-147-1082
Loop Clamp
Originally submitted name, clamp assy-cable support
00-147-2038
Access Cover
3.500" inside diameter 0.281" hole diameter 3.750" outside diameter htwo holes spaced 2.050 min 2.062 max in. c to c located 0.590 min. 0.596 max in. above horizontal centerline, one hole located on vertical centerline 1.184 min 1.190 max in. below horizontal centerline
00-147-2573
Electronic Equipmen Hardware Kit
Used on cp-338/fpn-33.
00-147-3036
Helical Compression Spring Seat
Not casehardened
00-147-3266
Loop Clamp
1.000" overall width 0.024" material thickness phosphate zinc band surface treated single loop
00-147-3412
Handle Grip
0.875" inside diameter 5.000" overall length cylindrical
00-147-3904
Helical Compression Spring Seat
Passivate surface treated
00-147-4134
Access Cover
0.250" hole diameter enamel surface treated
00-147-5281
Mounting Bracket
Steel, casting, class 65-35; 6.190 in. lgt-from edge to center of hole, 6.000 in-w. to center of hole; hole for shock 0.626 dia; mounting holes 0.406 dia
00-147-5309
Mounting Plate
00-147-5313
Mounting Bracket
Material steel casting sand GRADE80-50, spec qq-s-681
00-147-5373
Angle Bracket
Enamel surface treated angle
00-147-6127
Retaining Strap
3.688" overall length 1.625" overall width 0.125" material thickness zinc surface treated curved arch
00-147-6128
Access Cover
2.480" inside diameter 0.125" hole diameter 2.911" outside diameter
00-147-6138
Retaining Strap
0.920" overall length 0.187" overall width 0.045" material thickness two mounting holes passivate surface treated straight arch
00-147-6149
Angle Bracket
Angle
00-147-6165
Key Blank
Used on w/s:strategic weapon system (poseidon and trident). brass
00-147-6181
Swivel Caster
Swivel offset
00-147-6186
Spring Tension Clip
0.020" material thickness
00-147-6240
Angle Bracket
Angle
00-147-6401
Spring Tension Clip
00-147-6760
Access Cover
0.301" hole diameter anodize surface treated
00-147-8122
Protective Dust And Moistur Plug
