01-167-2327
Angle Bracket
01-167-2349
Helical Compression Spr Retainer
01-167-2351
Clamping Catch
01-167-2392
Detent Plunger
01-167-2393
Detent Plunger
01-167-2454
Access Cover
Olive drab, color number 24087
01-167-2558
Threaded Spacing Standoff
01-167-2723
Access Cover
Used on cummins engine co,diesel engine-general application, numerous engines.
01-167-2900
Access Cover
Used on ARSR8. orange color; 3.750 in. lg; 2.625 in. w; 0.031 in. thick; 0.875 in. leg each side with 0.250 in. mtg hole each side; topside has 0.500 by 0.375 corner cut out on same side
01-167-2906
Drawer Extension Slide Section
Contains 4 holes, 0.193 in. min to 0.203 in. max dia, countersunk 0.385 in. min to 0.411 in. max dia by 100.0 degrees
01-167-2907
Drawer Extension Slide Section
Contains 4 holes, 2 on each end, 0.193 in. min to 0.203 in. max, countersunk 0.385 in. min to 0.411 in. max by 100.0 degrees
01-167-2994
Quick Release Plunger
0.750" thread length 20 thread quantity per inch unc thread series
01-167-2995
Drawer Extension Slide
Cadmium surface treated
01-167-3461
Detent Plunger
01-167-3502
Bow Handle
4.840" overall length passivate surface treated unf thread series
01-167-3503
Catch Strike
1.875" overall length 1.625" overall width zinc surface treated
01-167-3584
Access Cover
5.500" outside diameter
01-167-3730
Flush Catch
Bracket matl steel flush lever actuator
01-167-3943
Protective Dust And Moistur Plug
2a thread class
01-167-3998
Rod End Connector
01-167-4116
Angle Bracket
01-167-4187
Threaded Spacing Standoff
Left internal
01-167-4188
Cushioning Pad
01-167-4213
Helical Compression Spr Retainer
Irregular
01-167-4216
Protective Dust And Moi Cap-plug
01-167-4217
Solid Plain Disk
01-167-4218
Retaining Strap
1.687" overall length 0.500" overall width 0.032" material thickness passivate surface treated saddle arch
01-167-4220
Strap Fastener Loop
01-167-4336
Access Cover
Used on 2530-01-122-6826.
01-167-4465
Butt Hinge Leaf
2.000" overall length butt blank
01-167-4466
Butt Hinge Leaf
2.000" overall length butt blank
01-167-4517
Retaining Strap
7.750" overall length 0.560" overall width 0.063" material thickness chromate mil-c-5541 cl 3 surface treated straight arch
01-167-4518
Synchro Clamp
0.250" hole diameter
01-167-4592
Access Cover
Enamel surface treated
01-167-4593
Access Cover
0.112-40nc-2b sz of 2nd hole enamel semigloss surface treated
01-167-4623
Access Cover
0.265" hole diameter
01-167-5122
Double Angle Bracket
Second leg has 2 self-locking plates 0.739 in. lg, 0.290 in. w min, 0.416 in. w max double angle
01-167-5159
Mounting Bracket
Alum alloy 2024-T851; 23.700 in. lg; 13.560 in. w; 2.980 in. thk
01-167-5160
Mounting Bracket
01-167-5175
Mounting Bracket
Used on 26a/e recharging unit. steel, cold roll, ansi/astm a 366; primer, mil-p-23377; urethane coating, mil-c-83286; 3.500 in. lg, with tab extended 1.500 in. lg; 1.000 in. w; 2.125 in. hgth; 0.125 in. matl thk; 5 holes 0.265-0.272 in. dia
01-167-5230
Rod End Clevis
3a rod connection thread class right-hand rod connection 1.190" rod connection thread length 0.374" hole diameter 0.815" overall width clevis unjf rod connection thread series
01-167-5280
Threaded Spacing Standoff
1st projection is knurled, flange is located near middle, hardness critical item
01-167-5473
Angle Bracket
01-167-5474
Angle Bracket
