01-147-7900
Mounting Plate
01-147-7906
Access Cover
End item identification nsn 2350012030188
01-147-7922
Access Cover
Used on 2590-01-063-1440,5420-01-076-6096.
01-147-8005
Detent Plunger
01-147-8056
Rod End Clevis
01-147-8074
Detent Plunger
01-147-8075
Detent Plunger
01-147-8126
Angle Bracket
01-147-8142
Loop Clamp
1.000" overall width single loop
01-147-8209
Protective Dust And Moi Cap-plug
01-147-8215
Angle Bracket
01-147-8216
Angle Bracket
01-147-8217
Angle Bracket
01-147-8270
Electronic Equipmen Hardware Kit
Used on mt1898/vrc.
01-147-8284
Threaded Spacing Standoff
Left internal
01-147-8285
Threaded Spacing Standoff
Projection one end left internal thread
01-147-8290
Bumper
0.625" hole diameter fastening device: plate assembly p/n 12313017
01-147-8582
Retaining Strap
3.220" overall length 1.000" overall width 0.080" material thickness anodize surface treated curved arch
01-147-8650
Access Cover
Used on aircraft model f-18.
01-147-8770
Angle Bracket
Angle
01-147-8771
Angle Bracket
Angle
01-147-8784
Loop Clamp
0.500" overall width 0.020" material thickness color light blue; base bar to extend to center of clamp; 10-32 clinch nut on bottom side of lower foot passivate band surface treated single loop
01-147-8794
Helical Compression Spr Retainer
Irregular
01-147-9023
Retaining Band
01-147-9084
Surface Bolt
Used on a/m32a-86 generator set. steel, c/o:curved rod 7.250 in.lg, 1 hole drilled thru 0.250 in.from end that attaches to latch end, 0.280 in.hole diameter, other end attaches to latch handle, made from fscm 19220, p/n 2-4972-5;
01-147-9197
Retaining Seal Plate
Used on mhu-196/204/m. material stainless steel; passivated finish; 8.120 in. nom o/a lg; 5.500 in. nom o/a w; 0.187 in. nom o/a thk; center cut out; nomenclature seal plate
01-147-9205
Key Blank
Used on mhu-196/204/m. material steel alloy; 1.500 in. nom lg; 1.500 in. w; 0.418 in. h; center hole, 0.626 in. nom dia; nomenclature key
01-147-9214
Mechanical Stop
Used on mhu-196/204/m. material steel alloy; 1 mtg hole, 0.876 in. nom dia
01-147-9217
Angle Bracket
Used on mhu-196/204/e. pbracket, angle; steel; 4.250 in nom 1st leg lg, 1.000 in nom 2nd leg lg, 0.125 in nom 1st
01-147-9219
Pad Eye
Used on mhu-196/204/m. material steel alloy; 1.180 in. nom o/a lg; 1.250 in.nom o/a dia; nomenclature pad, piston
01-147-9375
Mending Plate
6.300" overall length 0.250" overall width 0.090" material thickness 2.625 in. c to c first to second hole chromate surface treated rectangular
01-147-9400
Air Inlet-outlet Frame
01-147-9568
Mounting Plate
Anodize surface treated
01-147-9586
Bumper
0.175" hole diameter washer embedded between counterbore
01-147-9822
Angle Bracket
Color forest green enamel surface treated angle
01-147-9823
Angle Bracket
Angle
01-147-9842
Loop Clamp
0.560" overall width 0.170" material thickness longer tongue extendes 1.310 in. at 45 degrees, is 1.380 in. w paint surface treated single loop
01-147-9855
Detent Plunger
Used on M60 tank
01-147-9896
Webbing Strap
01-147-9918
Mounting Plate
01-147-9919
Mending Plate
Used on tank,combat full trk;pccn-cmbt85;nsn-2350-01-061-2445. 8.470" overall length 1.710" overall width 0.250" material thickness cadmium surface treated rectangular
01-147-9923
Mounting Bracket
Used on 2350-01-061-2445. 5-plate-12312067-1, 2, 3, 7, and 5; pin-12312067-4; block-12312067-6; material, aluminum alloy 6061 temper T651, spec 00-a-250/11
01-147-9930
Mending Plate
Used on carrier,mlrs;2350-01-091-5405. 5.000" overall length 0.750" overall width 0.125" material thickness rectangular
01-147-9931
Mending Plate
Used on carrier,mlrs;2350-01-091-5405. 3.500" overall length 0.750" overall width 0.125" material thickness rectangular
01-147-9935
Threaded Spacing Standoff
Used on tank, combat full trk, 2350-01-061-2445 left internal
01-147-9951
Retaining Strap
5.330" overall length 0.750" overall width 0.250" material thickness straight arch
01-147-9973
Access Cover
Used on 2350-01-061-2445,2350-01-087-1095and 2350-01-136-8738. cadmium surface treated
