01-142-3202
Angle Bracket
01-142-3445
Mounting Bracket
Aluminum alloy sand casting, spec ams 4217; approximate length 7.9134 in.; approximate width 7.4006 in.; approximate thickness 2.99215 in.
01-142-3454
Barrel Bolt
Bar o/a lg:1.750 in.nom; material:steel;
01-142-3475
Synchro Clamp
0.280" hole diameter
01-142-3603
Retaining Strap
01-142-3643
Angle Bracket
2nd leg has l-shaped slot 1.250 in. long , 0.370 in. slot width along leg width, 0.310 in. slot width along leg length angle
01-142-3649
Access Cover
Used on a/m32a-86. treat
01-142-3651
Access General Purpose Door
Used on a/m32a-86. paint iaw mil-t-704 forest green
01-142-3721
Mounting Bracket
Item is 2.50 in. lg, 1.37 in. high, 1.25 in. wide; reqrs 2 spotweld nuts p/n 8126247-1; reqrs 1 hole 0.101 in. dia., 2 holes 0.312 in. dia, and 1 hole 0.562 in. dia; treat
01-142-3728
Mounting Plate
Used on a/m32a-86 generator. consists of 1 plate 8126327, 4 bars, 1 p/n 8126717, 2 p/n 8126688, 1 p/n 8126310, 4 gussets p/n 8126692, 4 screws MS90728-109, 4 washers MS35338-48, 1 plate 8126682, 2 sprt assys 8126328, 3 pads, 2 p/n 8126685, 1 p/n 8126328, 2 chan assys p/n 8126690, and 8126689; treat
01-142-3729
Mounting Bracket
Item is 2.50 in. lg., 0.56 in. high, 1.25 in. wide, ; consists of 1 bracket p/n 8126630-1, and 2 spotweld nutsp/n 8126247-1; reqr 1 hole 0.101 in. dia., 2 holes 0.312 in. dia, and 1 HOLE0.562 in. dia.; material 0.06 in. 16 gage cr cq. per astm-A366; treat
01-142-4176
Manual Control Handle
4.500 in.lg, 1.000 in.dia at small end
01-142-4235
Protective Dust And Moistur Plug
01-142-4345
Manual Control Lever
Aluminum alloy per qq-a-367, COMP7075-T73; 18.025 in. o/a lg
01-142-4377
Helical Compression Spring Seat
01-142-4378
Helical Compression Spring Seat
0.2520" bore diameter seat
01-142-4379
Helical Compression Spring Seat
0.2500" bore diameter not casehardened seat
01-142-4386
Mortise Latch
01-142-4464
Snap Hook
3.625" overall length
01-142-4465
Solid Plain Disk
Top of dia chamfered 45 degrees by 0.035 in. depth passivate surface treated
01-142-4466
Strap Fastener Loop
2.000" overall length cadmium surface treated rectangle
01-142-4469
Loop Clamp
0.375" overall width 0.0285" material thickness cushion color white offset mount
01-142-4470
Bow Handle
3.310" overall length passivate surface treated unf thread series
01-142-4473
Spring Tension Clip
0.015" material thickness cadmium surface treated
01-142-4585
Threaded Spacing Standoff
Left internal
01-142-4592
Mounting Bracket
Used on 1260-01-122-8735. remove all burrs
01-142-4617
Dirt And Liquid Deflector
Chromate surface treated
01-142-4619
Double Angle Bracket
Anodize surface treated adjacent angles
01-142-4622
Mounting Plate
Chromate surface treated
01-142-4633
Access Cover
0.139" hole diameter
01-142-4714
Threaded Spacing Standoff
Post, electrical-mechanical equipment
01-142-4760
Loop Clamp
0.750" overall width 0.035" material thickness lock tab three lock tabs have one slot each, 0.156 in. min passivate surface treated center mount
01-142-4797
Protective Dust And Moisture Cap
2a thread class cadmium surface treated
01-142-4804
Rod End Connector
01-142-4805
Rod End Clevis
01-142-4806
Expansion Plug
01-142-4807
Expansion Plug
01-142-5353
Angle Bracket
Angle
01-142-5354
Angle Bracket
Corner radius of 0.190 in. primer surface treated angle
01-142-5626
Bow Handle
Used on b-1b aircraft age.. handle, fuel tank access door contains 2 captive, knurled thumbscrews for attachment to access door during fuel tank maintenance
01-142-5833
Access Cover
Used on fairchild camera and instrument corp ka-99 camera.
01-142-5834
Access Cover
Used on fairchild camera and instrument corp ka-99 camera.
