00-133-8421
Angle Bracket
4 slotted holes in second leg 1.093 in. lg by 0.375 in. wide angle
00-133-8493
Pipe Hanger
Enamel surface treated
00-133-8494
Mounting Plate
Chromate surface treated
00-133-8497
Bridge Clamp
0.396" hole diameter 8.000" overall length 1.000" overall width item has two mtg hole on clamp ends chromate band surface treated flat
00-133-9251
Access Cover
Anodize surface treated
00-133-9397
Access Cover
0.281" hole diameter anodize surface treated
00-133-9492
Dust And Moisture Seal Boot
00-133-9510
Leather Strap
00-133-9567
Mounting Bracket
Gsteel casting, class 65-35, fed qq-s-681, 9.279 in. lg, 4.829 in. w, 4.078 in. h, two holes 0.530 in. dia, four holes 0.397 in. dia, four holes 0.375-16 unc-2b thd, one hole 0.250-20 unc-2b thd 0.750 in. deep
00-133-9568
Angle Bracket
Angle
00-133-9579
Angle Bracket
Angle
00-133-9580
Mounting Bracket
Steel casting, fed qq-s-681, class 65-35, 5.885 in. lg, 3.880 in. w, 3.311 in. deep three mtg holes 0.397 in. dia.
00-133-9582
Mounting Bracket
Steel casting, class 4A1, fed qq-s-681, 0.875 in. thk, 7.187in. lg, 3.000 in. w, 3 holes 0.406 in. dia, one hole 0.630 in. dia
00-133-9621
Mounting Bracket
Steel, qq-s-631 or qq-s-634, 1015 to 1025 or steel, qq-s-635, 1020 0.312 in. thk, irregular shaped to approximate o/a dimensions 3.250 in. w x 4.440 in. lg, with 2 ea 0.560 in. x 1.000 in. slots along the w
00-133-9622
Mounting Bracket
Steel, qq-s-633, C1010 to C1025 or steel, FS1020 qq-s-635 5.752 in. lg o/a, 3.250 in. w o/a, 5.38 in. h o/a, 4 slots, 2 slots 1.250 in. lg by 0.560 in. w, 2 slots 1.000 in. lg by 0.560 w, 0.312 in. thk of material
00-133-9623
Mounting Bracket
Metal, approximate o/a dimensions 2.500 in. w x 4.500 in. lg, c/o 1 ea bracket, FSCM19207 p/N7400130, 1 ea bracket, FSCM19207 p/N10911141, 1 ea retainer, FSCM19207 p/N7094525, and 2 ea rivet, FSCM21450 p/N118057
00-133-9624
Mounting Bracket
Steel, qq-s-631 or qq-s-634, 1010 to 1025 or steel, qq-s-635, 1020 0.312 in. thk irregular shaped to approximate o/a dimensions 3.250 in. w x 4.380 in. lg, with 4 ea slots 0.560 in. x 1.000 in.
00-133-9627
Angle Bracket
Enamel surface treated angle
00-133-9633
Access Cover
0.391" hole diameter
00-133-9658
Mounting Bracket
Used on m551 sheridan.
00-133-9662
Access Cover
Enamel lusterless surface treated
00-133-9663
Access General Purpose Door
00-133-9667
Access General Purpose Door
00-133-9671
Mounting Bracket
Steel casting class 65-35 spec.qq-s-681, 5.000 in.lg, 1.625 in.h, 2.241 in.w, irregular shape
00-133-9675
Angle Bracket
00-133-9677
Mounting Bracket
Material:aluminum alloy, 61s temper 0 spec qq-a-325 or qq-a-327 0.19" thick; length of 6.750"; width of 1.250"; flat side of 2.00" long; item has one slot 0.880" long; width of slot is 0.380"
00-133-9682
Mounting Bracket
Matl steel qq-s-640 composition FS0 condition annealed or temper 2 to 5; 0.180 in. thk; 4.610 in. o/a lg; o/a cross-section u-shaped; mtg base leg lgth 2.000 in., 2.310 in. wd, 1 ea 0.940 in. dia mtg hole; facility mtg leg 2.000 in. lg, 3.500 in. wd, 1 ea slot 0.880 in.
00-133-9691
Angle Bracket
00-133-9721
Dust And Moisture Seal Boot
0.030" material thickness thru-hole, expandable
00-133-9724
Angle Bracket
Cutaway in first leg 0.750 in. wide, 25 degrees blended into second leg, angle on firs leg, slot in second leg 0.312 in wide 1.000 deep chromate surface treated angle
00-133-9726
Manual Control Lever
Steel carbon, 4.562 in. lg, 2.250 in. w, 0.250 in. dia of material
00-133-9732
Angle Bracket
Angle
00-133-9740
Angle Bracket
Enamel surface treated angle
00-133-9744
Angle Bracket
Enamel surface treated angle
00-133-9789
Lock-release Lever
Matl-steel qq-s-698, temp 3 zinc surface treated
00-133-9794
Mounting Plate
00-133-9795
Mounting Plate
00-133-9812
Catch Strike
2.375" overall length 1.687" overall width cadmium surface treated
00-133-9826
Access Door Hinge
End item is carrier personnel ; nsn 2350-00-968-6321 ; model M113
00-133-9834
Access Cover
0.302" hole diameter
00-134-0002
Mounting Bracket
Consists of one (1) support p/n 10867067 fscm 19207, one (1) pin p/n 589977 fscm 20450; pin protuberance is 0.875" from support
00-134-0094
Double Angle Bracket
Double angle
00-134-0122
Angle Bracket
Four 0.375 in. dia. holes drilled through second leg in horizontal line 0.375 in. from edge, first hole located 1.125 in. from end, second hole 7.625 in. from center of first hole, third hole 15.875 in. from center of first hole, fourth hole 23.500 in. from center of first hole angle
00-134-0852
Mounting Bracket
00-134-1129
Angle Bracket
Used on semitrailer,m871,m118 series. angle
00-134-1131
Mending Plate
2.500" overall length 0.625" overall width 0.125" material thickness
00-134-1132
Angle Bracket
Angle
00-134-1166
Lock-release Lever
Matl-steel qq-s-698 cadmium surface treated
00-134-1183
Angle Bracket
Phosphate surface treated angle
