01-120-6559
Protective Dust And Moi Cap-plug
01-120-7015
Angle Bracket
Chromate surface treated angle
01-120-7016
Angle Bracket
Angle
01-120-7193
Detent Plunger
0.735 in. o/a lg; 24 unf-2a exterior thds on body; final pressure on 0.186 in. ball:25-35 lbs
01-120-7315
Plug Button
Used on 3990-01-444-6174 bitum distributor. black standard
01-120-7316
Protective Dust And Moistur Plug
Used on nsn 2320-01-304-2277 pls (palletized loading system).
01-120-7318
Spring Tension Clip
01-120-7572
Access Cover
0.172" hole diameter 1.870" outside diameter cadmium surface treated
01-120-7573
Nut And Bolt Retainer
1.433" overall length 0.328" overall width 0.064" material thickness
01-120-7574
Mounting Bracket
1.750" overall length 1.750" overall width
01-120-7649
Dust And Moisture Seal Boot
01-120-7650
Dust And Moisture Seal Boot
01-120-7651
Dust And Moisture Seal Boot
01-120-7667
Helical Compression Spring Seat
0.3230" bore diameter slot on both sides 0.0300 in. w min, 0.0600 in. w max, 0.0150 in. deep
01-120-7950
Threaded Spacing Standoff
Flanged with left internal thread
01-120-7970
Protective Dust And Moisture Cap
Color richardson brown with white trademark
01-120-7971
Webbing Strap
01-120-8158
Mechanical Stop
Used on agm-86b alcm. brass rod; 2.500 in. nomo/a lg; 3.880 in. nom od; 2.500 in. nom id; 1.620 in.nom dp; 2 thru holes, 0.281 in nom dia, 1 in. nom ctr hole; nomenclature stop, rotary actuator
01-120-8208
Angle Bracket
Dichromate surface treated angle
01-120-8228
Access Cover
0.281" hole diameter 4.400" outside diameter center hole 1.650 id
01-120-8267
Loop Clamp
0.500" overall width 0.018" material thickness passivate band surface treated offset mount
01-120-8269
Loop Clamp
0.500" overall width 0.0295" material thickness offset mount
01-120-8344
Rod End Clevis
0.125" hole diameter 0.760" overall width two 0.112 in. w by 0.430 in. dp pivot slotted holes; thru hole 0.315 in. min, 0.319 in. max on rod connection end clevis
01-120-8345
Rod End Clevis
0.126" hole diameter 0.890" overall width passivate surface treated clevis
01-120-8380
Helical Compression Spr Retainer
Irregular
01-120-8384
Antipilferage Seal
01-120-8436
Mounting Bracket
Ppipe steel seamless, 3/4 inch; 8.630 inch long; 3.650" start 2.500 inch radius bend; end of bend to end of bracket 3.530 inch; center line of bracket at start of bend to end of bracket bend is 52 degrees; long end ofbracket rectangular steel bar 1.750" by 2.000" by 0.250"welded flush with end
01-120-8437
Mounting Bracket
Rpipe steel seamless, 3/4 inch; 8.630" long; 3.650" start 2.500 inch radius bend; end of bend to end of bracket 3.530"; center line of bracket at start of bend to end of bracket bend is 52 degrees; longend of bracket retangular steel bar 1.750" by 2.000" by 0.250"; welded flush with end
01-120-8443
Angle Bracket
Attached to retaining plate by four rivets. not finished. angle
01-120-8452
Manual Control Lever
Consists of knob p/n 10900172 fscm 19207; handle p/n 12256739 fscm 19207; bracket p/n 12256712 fscm 19207
01-120-8510
Loop Clamp
0.500" overall width 0.0269" material thickness cadmium or zinc surface treated single loop
01-120-8511
Loop Clamp
0.625" overall width 0.027" material thickness
01-120-8524
Bow Handle
7.812" overall length cadmium handle surface treated
01-120-8525
Double Angle Bracket
Double angle
01-120-8562
Grooved Headless Rod
24.12 in. from groove first end to groove second end; two helical u grooves 3.5 min. 3.62 max. in. from end, 4.496 min. 4.498 max. in. dia; helical grooves 1.0 in. pitch, 2.0 in. lead; all grooves 0.078 in. wide; second groove 2.44 min. 2.56 max. in. from each end groove; hole each end 0.327 min. 0.345 max. in. dia, 3.38 in. deep, 1.0 in. center bore by 0.75 in. deep; heat treat to rockwell C45 or 50 for a min. depth of 0.25 in.
01-120-8844
Pad Eye
15.250 in. od; 8.562 in. id; 3.000 in.o/a h
01-120-9185
Access Cover
Used on trident submarine.
01-120-9366
Protective Dust And Moisture Cap
01-120-9484
Loop Clamp
0.500" overall width 0.046" material thickness lock tab cushioncolor black with blue identifier. single loop
01-120-9510
Sealing Plug Assembly
1alum. alloy 2024-T4 qq-a-225/6; plug anodized per mil-a-8625 TY2 green; pin alodined per mil-c-5541 yellow; plug 0.4678/0.4687in. od, 0.420 in. id , 0.795/0.805 in. lg; pin is tapered, 0.428 in. dia at top, 0.355 in. lg, pin prewaxed w/enthone no. 18
01-120-9525
Plug Button
Zinc surface treated standard
01-120-9526
Protective Dust And Moistur Plug
Chromate surface treated
01-120-9540
Detent Plunger
Used on XM1 tank, M1
01-120-9545
Spring Holder
Large end 0.850 in. dia; small end 0.575 in. dia; 0.2500 in. dia gage ball passivate surface treated
01-120-9582
Access Hole Frame
01-120-9583
Access Hole Frame
01-120-9585
Access Hole Frame
