01-112-9693
Angle Bracket
Used on 2350-01-179-1027(m2a1)fighting,vehicle infantry. bracket, angle used to support the panel, turret shield angle
01-112-9694
Angle Bracket
01-112-9874
Helical Compression Spr Retainer
Parallel
01-113-0040
Protective Dust And Moisture Cap
01-113-0422
Dust And Moisture Seal Boot
01-113-0443
Access Cover
Used on ch-47, rotary wing aircraft.
01-113-0563
Threaded Spacing Standoff
Projection one end left internal thread
01-113-0634
Angle Bracket
Angle
01-113-0667
Access General Purpose Door
Item has a 30 degree bend, lg on each side of bend is 7.720 in.
01-113-0877
Protective Dust And Moi Cap-plug
01-113-0878
Protective Dust And Moi Cap-plug
01-113-0879
Protective Dust And Moi Cap-plug
01-113-0889
Retaining Strap
1.375" overall length 0.500" overall width 0.031" material thickness double arch
01-113-0891
Catch Strike
0.950" overall length 1.250" overall width 0.090" material thickness
01-113-0893
Friction Catch Stud Receptacle
0.440" overall width 0.012" material thickness oil dipped; hole dia 0.125 in. nom; o/a hgt 0.232 in.; lgth 0.970 in. nom
01-113-0894
Flush Catch
Used on aircraft, eagle f-15. heat treated catch; matl:button alum. alloy, catch cres steel, gasket syn rubber; button anodized, catch passivated button actuator
01-113-0897
Loop Clamp
25.0mm overall width 1.2mm material thickness loop covered with bonded neoprene or vinyl coating 0.8 mm thk multiple loop
01-113-0898
Loop Clamp
0.500" overall width 0.032" material thickness
01-113-0899
Loop Clamp
0.500" overall width 0.032" material thickness
01-113-0900
Loop Clamp
0.484" overall width 0.045" material thickness
01-113-0905
Loop Clamp
0.219" overall width 0.032" material thickness
01-113-0908
Loop Clamp
0.500" overall width 0.058" material thickness
01-113-0912
Loop Clamp
0.500" overall width 0.064" material thickness wedge included
01-113-0913
Loop Clamp
0.625" overall width 0.020" material thickness
01-113-1011
Mounting Plate
Used on fighting vehicle,infantry.
01-113-1016
Mounting Bracket
Matl steel, carbon; lg 4.000 in.; h 1.600 in.; for further reference refer to cage 19207, dwg p/n 12297299
01-113-1020
Hinge Torsion Bar
01-113-1021
Mounting Bracket
Matl steel, carbon; lg 5.000 in.; h 2.625 in.; has three mounting slots ea. being 0.438X1.375 in.; for furtherinformation refer to cage 19207, dwg p/n 12296882
01-113-1027
Butt Hinge Leaf
01-113-1037
Mending Plate
34.450" overall length 1.250" overall width 0.250" material thickness rectangular
01-113-1038
Mending Plate
63.910" overall length 1.000" overall width 0.250" material thickness rectangular
01-113-1042
Mending Plate
21.750" overall length 1.250" overall width 0.250" material thickness rectangular
01-113-1044
Mending Plate
13.000" overall length 1.250" overall width 0.250" material thickness rectangular
01-113-1045
Mending Plate
42.720" overall length 1.250" overall width 0.250" material thickness rectangular
01-113-1046
Mending Plate
13.050" overall length 1.250" overall width 0.250" material thickness rectangular
01-113-1047
Mending Plate
7.280" overall length 1.250" overall width 0.250" material thickness rectangular
01-113-1048
Mending Plate
19.940" overall length 1.250" overall width 0.250" material thickness rectangular
01-113-1049
Mending Plate
105.650" overall length 1.250" overall width 0.250" material thickness rectangular
01-113-1050
Mending Plate
76.730" overall length 1.250" overall width 0.250" material thickness rectangular
01-113-1051
Mending Plate
22.410" overall length 1.250" overall width 0.250" material thickness rectangular
01-113-1056
Mending Plate
4.700" overall length 4.000" overall width 0.063" material thickness rectangular
01-113-1057
Resilient Mount Plate
01-113-1059
Mounting Bracket
Aluminum 5086-H32 spec qq-a-250/70.090 thk; optional material aluminum 5083-H323 spec qq-a-250/6 EXCEPT24, 000psi nin ys
01-113-1062
Mounting Bracket
Used on 2350-01-049-2695.
01-113-1063
Mounting Bracket
Aluminum bracket is 30.650 in. long by 2.750 in. wide by 2.156 in. high
