01-078-9048
Protective Dust And Moisture Cap
Consists of cap, screw, o-ring
01-078-9068
Drawer Extension Slide Section
Anodize surface treated
01-078-9069
Drawer Extension Slide
Slide-90 degree tilt anodize surface treated
01-078-9131
Bail Handle
Handle is mounted in slotted ferrules; ferrules thd 0.190-32 unf 2b, 0.380 in. deep anodize surface treated eye hook
01-078-9133
Rod End Clevis
3a rod connection thread class right-hand rod connection 1.440" rod connection thread length 0.190" hole diameter cadmium surface treated unjf rod connection thread series
01-078-9190
Pipe Hanger
Split ring
01-078-9196
Retaining Strap
2.505" overall length 0.500" overall width 0.051" material thickness saddle arch
01-078-9711
Angle Bracket
Angle
01-078-9712
Angle Bracket
Angle
01-078-9713
Angle Bracket
Angle
01-078-9814
Threaded Spacing Standoff
Groove on slotted end left internal
01-078-9815
Threaded Spacing Standoff
Left internal
01-078-9829
Solid Nonmetallic Wheel
1.062" overall length 2.000" outside diameter 0.875" overall width
01-079-0080
Drawer Extension Slide
01-079-0081
Drawer Extension Slide
01-079-0082
Drawer Extension Slide
01-079-0087
Drawer Extension Slide
Used on w/s: submarine (ssn) fire control sys; submarine armament and fire control systems; ship, ohio class ssn (trident).
01-079-0097
Retaining Strap
1.375" overall length 0.468" overall width 0.031" material thickness end tapered passivate surface treated j
01-079-0108
Retaining Strap
2.125" overall length 0.750" overall width 0.064" material thickness no mtg holes curved arch
01-079-0112
Spring Tension Clip
0.059" material thickness zinc surface treated
01-079-0267
Protective Dust And Moistur Plug
01-079-0281
Antipilferage Seal
01-079-1230
Clamping Catch
0.132" hole diameter zinc surface treated lever
01-079-1231
Spring Tension Clip
0.0625" material thickness heat treat rockwell C45-C50
01-079-1232
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
01-079-1233
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
01-079-1523
Access Cover
1.800" outside diameter
01-079-1600
Retaining Strap
4.000" overall length 2.000" overall width 0.120" material thickness two slotted holes on opposite end, 0.207 in, T0 0.215 in lg chromate surface treated straight arch
01-079-1606
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
01-079-1607
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
01-079-1809
Helical Compression Spr Retainer
Passivate surface treated irregular
01-079-1812
Clamping Catch
01-079-1813
Loop Clamp
0.500" overall width 0.020" material thickness passivate band surface treated single loop
01-079-1829
Manual Control Lever
Used on m1 tank family. alum alloy; c/o lever, 2 plate, 2 tube, plate assembled by weld; o/a LG11.810 in; o/a wid 5.000 in; used on adapter, switch actua on turret, elect
01-079-1830
Mounting Plate
Used on 2350-01-061-2445. consists of bracket-12283849; 2-rod-12287348; 4-spacer-12287383; 4-pad-12273718-10; channel-12287349-1; bracket-12280932-3; bracket-12283848; channel-12287349-2; 2-stop-12287380 enamel surface treated
01-079-1833
Mounting Plate
Used on m1a1 tank.
01-079-1838
Mounting Bracket
Used on the m1 tank. 1aluminum alloy 6061, temper T651, spec qq-a-2501/11, 0.25 material thickness; height 2"; length 13.000; width 6.500; parts consist of:2-gusset-12285917-5; 2-gusset-12285917-3; plate-12285917-2; plate-12285917-1; 2-block-12285917-4
01-079-1839
Mounting Bracket
Used on 2350-01-087-1095 xm1 tank. material; aluminum alloy 6061 0.250 thk; 8.500 in. o/a lg; 6.620 in o/a width; four holes 0.420 in. dia.
01-079-1847
Lock-release Lever
Used on M1. arm: length 1.03 in.; thickness .250 in.; two holes: distance between the holes 0.550 in.
01-079-1965
Angle Bracket
Angle
01-079-1994
Straight Headless Rod
Passivate surface treated
01-079-2143
Bow Handle
5.375" overall length hande offset 15 degrees 0.650 in. from base
01-079-2144
Hook Handle
5.281" overall length 2nd hole located near hook end, dia 0.160 to 0.162 in., dist from hook end to hole cntr along lg 0.781 in.
