00-116-8048
Helical Compression Spring Seat
0.1680" bore diameter passivate surface treated seat
00-116-8058
Helical Compression Spring Seat
0.2500" bore diameter seat
00-116-8081
Manual Control Lever
12 holes 0.194 in. dia.0.450 in., 0.450 in. h, 7.760 in. lg
00-116-9484
Access Cover
0.125" hole diameter 24 ventilation holes 0.438 in. dia
00-116-9569
Access Cover
0.656" hole diameter 4.000" outside diameter chamfered 0.400 in. lg, 45 deg angle on bottom edge
00-116-9721
Loop Clamp
1.500" overall width any acceptable band surface treated center mount
00-117-0081
Mounting Plate
00-117-0280
Angle Bracket
Phosphate or enamel surface treated angle
00-117-0295
Access Cover
0.406" hole diameter 3/4 std pipe thd center hole
00-117-0339
Retaining Strap
3.125" overall length 0.500" overall width 0.120" material thickness plastic pyroxylin surface treated curved arch
00-117-0346
Access Cover
0.169" hole diameter one 0.103 dia hole along one side of length on same centerline of other holes chromate surface treated
00-117-0352
Access Cover
0.177" hole diameter shielding gasket bonded to surface of first recess
00-117-2531
Access Cover
0.410" hole diameter 6.380" outside diameter
00-117-2567
Mending Plate
3.120" overall length 1.310" overall width 0.187" material thickness
00-117-2595
Double Angle Bracket
Double angle
00-117-2687
Cushioning Pad
00-117-4034
Access Cover
0.125" hole diameter anodize surface treated
00-117-4756
Threaded Spacing Standoff
Left internal
00-117-4766
Threaded Spacing Standoff
Left internal
00-117-4853
Mounting Bracket
Used on tf-39 acft engine.
00-117-4854
Mounting Bracket
Used on tf-39 acft engine.
00-117-4879
Rod End Clevis
00-117-5039
Solid Plain Disk
00-117-5600
Angle Bracket
Used on T-33. items furnished as accessories: 6 screws angle
00-117-5628
Access Door Hinge
Model F80
00-117-5668
Threaded Spacing Standoff
Anodize surface treated internally threaded full length
00-117-5677
Rigid Caster
Aluminum caster rigid p/n 25040-475; wheel p/n aer 10-7-06; brake p/n 51500-l
00-117-5911
Rod End Clevis
2b rod connection thread class right-hand rod connection 2.000" rod connection thread length 0.751" hole diameter 2.250" overall width one no. 10-32 unf-2b threaded hole 0.500 in. deep located 2.875 in.from rod end parallel with pin hole cadmium surface treated clevis unc rod connection thread series
00-117-7245
Access Cover
Used on LGM-30. cover for encoder; next higher assy p/n 25-25553
00-117-7710
Access Door Hinge
00-117-8260
Butt Hinge Leaf
2.812" overall length 0.125" material thickness butt staggered holes
00-117-8261
Butt Hinge Leaf
2.812" overall length 0.125" material thickness butt staggered holes
00-117-8767
Butt Hinge Leaf
34.812" overall length 0.051" material thickness
00-117-9093
Access Cover
4.875" inside diameter 0.393" hole diameter 5.000" outside diameter
00-117-9102
Helical Compression Spring Seat
0.1875" bore diameter 1st step hex shape 1.375 in. across flats with flatted corners anodize surface treated seat
00-117-9246
Mortise Latch
For rh door
00-117-9283
Butt Hinge
9.875" overall length 0.040" material thickness butt
00-117-9370
Manual Control Lever
Total width 0.531 in; length is 0.937 in; 2 mounting holes 0.125 dia, matl steel, corrosion resistant, invest-ment casting comp ic 304/316, primer
00-117-9655
Angle Bracket
Cadmium surface treated angle
00-117-9795
Handwheel
0.812" inside diameter 4.000" outside diameter
00-117-9916
Nut And Bolt Retainer
Any acceptable overall length any acceptable material thickness anchor
00-118-0018
Rim Latch
Used on w/s: radar, firefinder, an/tpq-36 and an/tpq-37; airborne mobile dir air spt ctl (2id), (02m jul83), (an/uyq-3a); deployable strategic mission data preparation shelter-dsmdps.
00-118-0154
Synchro Clamp
0.281" hole diameter
00-118-0608
Protective Dust And Moisture Cap
00-118-0617
Snap Hook
0.750" inside diameter 4.000" overall length
00-118-0619
Protective Dust And Moistur Plug
00-118-0832
Access Cover
Anodize surface treated
