01-597-1487
Nonmetallic Grommet
01-597-1512
Retaining Ring
01-597-1515
Nonmetallic Grommet
01-597-1882
Nonmetallic Grommet Blank
Used on grommet.
01-597-1908
Nonmetallic Grommet Blank
Used on grommet rubber.
01-597-1948
Screw Thread Insert
Used on insert,screw thread.
01-597-2154
Nonmetallic Grommet
0.630" hole diameter panel grommet material is buna-n rubber (nitrile)
01-597-2254
Panel Fastener Insert
Insert, molded in csk sandwich panel anodize surface treated
01-597-2296
Panel Fastener Insert
Insert, molded in, csk sandwich panel anodize surface treated
01-597-2311
Snapslide Fastener Latch
Used on 2410-01-565-2599 tractor, full tracked, low speed. latch assembly
01-597-2324
Nonmetallic Grommet
Used on 2410-01-565-2599 tractor, full tracked, low speed. grommet
01-597-2381
Retaining Ring
Used on drive unit geared. retaining ring
01-597-2617
Nonmetallic Grommet
01-597-2717
Interlocking Sli Slider And Pull
Used on slide lock retainer.
01-597-2953
Retaining Ring
Used on 3805-01-573-0677 excavator, multipurpose, crawler mounted. snap ring
01-597-3024
Nonmetallic Grommet
Grommet, support, polyamide standard hole cutout dia 1.81, dia 2.31. (d) designates 90 degree flange for use in structures less than 0.180 thk
01-597-3031
Nonmetallic Grommet
Grommet, support, polyamide standard hole cutout 2.27, dia 2.77. (d) designates 90 deg flange for use in structures less than 0.180" thk
01-597-3041
Nonmetallic Grommet
Grommet, support, polyamide standard hole cutout dia 3.11, dia 3.60. (d) designates 90 degree flange for use in structures less than 0.180" thk
01-597-3089
Retaining Ring
01-597-3095
Lock Pin Fastener Stud
Used on an/pvs-15c, binocular night vision system. lock pin, switch knob passivate surface treated
01-597-3173
Retaining Ring
01-597-3212
Retaining Ring
01-597-3217
Retaining Ring
01-597-3324
Retaining Ring
Used on mk46 turret. retaining ring
01-597-3371
Hook Fastener Tape
Used on 2355-01-560-2306 mine detector system, vehicle mounted. standard nylon hook hook thickness 0.065 inch, mated thickness 0.125 inch, beige color - loop sold separately
01-597-3745
Screw Thread Insert
Used on helicoil.
01-597-3981
Retaining Ring
01-597-3993
Screw Thread Insert
Used on c-5 acft. insert, actuation mech, visor door next assy 200413168/69; 36 serrations, 5/16-24 thd 3b; u/o visor door
01-597-4752
Retaining Ring
8.750" outside diameter finger pull retaining ring 8" mat: 316sst per asme sa-479
01-597-4753
Retaining Ring
01-597-4757
Retaining Ring
Special flat ring style 185000.0 pounds per square inch tensile strength rating phosphate surface treated
01-597-4992
Retaining Ring
Navy special project used in a brakes group
01-597-5164
Retaining Ring
Used on V-22. ring antirotation, brg, prgb outside dia is 3.265 to 3.267 for a thickness of 0.155 to 0.165 then outside dia becomes 2.690 for a thickness of 0.274 to 0.276; inside dia is 2.410; item is flat on opposite side with a tab in the middle of the flat area, flat area starts 1.682 from the center of the item;
01-597-5239
Screw Thread Insert
Used on aircraft, b-2 bomber. insert, screw thread
01-597-5252
Hook And Pile Fastener Tape
01-597-5347
Screw Thread Insert
01-597-5431
Panel Fastener Insert
01-597-5484
Panel Fastener Insert
01-597-5486
Panel Fastener Insert
01-597-5487
Panel Fastener Insert
01-597-5548
Retaining Ring
01-597-5653
Nonmetallic Grommet
Energy suspension seals
01-597-5659
Nonmetallic Grommet
1.500" hole diameter
01-597-5701
Nonmetallic Grommet
0.563" hole diameter
01-597-5719
Guide Pin Receptacle
01-597-6031
Turnlock Fastener Stud Assembly
Used on mh-53e sea dragon helicopter. navy special project
01-597-6466
Retaining Ring
Used on mrap; rg33.
01-597-6467
Retaining Ring
Used on mrap; rg33.
01-597-6487
Hook Fastener Tape
01-597-6490
Hook Fastener Tape
