01-469-5255
Pin-rivet Collar
Used on mv-22 aircraft.
01-469-5258
Pin-rivet Collar
01-469-5259
Pin-rivet Collar
01-469-5260
Pin-rivet Collar
01-469-5261
Pin-rivet Collar
01-469-5262
Pin-rivet Collar
01-469-5264
Pin-rivet Collar
01-469-5401
Pin-rivet
Flush countersunk head style 0.992" grip length 125000 double pounds per square inch shear strength pin, 100 degrees flush shear head, stainless steel material = PH13-8mo stainless steel per ams 5629 aluminum body surface treated unjf thread series
01-469-5451
Tubular Rivet
01-469-5677
Blind Rivet
Used on hercules c130 aircraft. universal head style 0.188" grip length rivet-blind, protruding head, mechanically locked spindle, bulbed style a, class 1, codem end item HC130n nvis; optional sleeve material can be uns NO4400; optional locking ring material can be uns S55285 or uns S30400 aluminum sleeve surface treated
01-469-5783
Blind Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.438" grip length rivet, blind, monel, mechanically locked, 100 degree flush shear head end item block 89 upgr; lock collor to be passivated per qq-p-35 f or a-286 passivate stem surface treated
01-469-6206
Pin-rivet
Used on f18 de/f. 3a thread class right-hand flush countersunk head style 0.620" grip length 32 thread quantity per inch pin-rivet, threded, shear, 100 degree c'sunk head, hex point drive passivate surface treated unjc thread series
01-469-6208
Pin-rivet
3a thread class right-hand countersunk w/reverse chamfer head style 0.013" grip length 32 thread quantity per inch pin-rivet, threaded, shear, protruding head, hex point drive unjc thread series
01-469-6246
Solid Rivet
Used on 1040014138332. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.000" grip length
01-469-6697
Tubular Rivet
01-469-7082
Blind Rivet
Universal head style 0.126" grip length anodize surface treated
01-469-7215
Blind Rivet
Used on prowler ea-6b aircraft. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.501" grip length rivet, blind, -general purpose, bulbed, 100 degree flush head, mechanically locked spindle locking ring-passivate per qq-p-35 for cres only; intended for general purpose use in both thick sheet stack-up cadmium sleeve or aluminum sleeve surface treated
01-469-7851
Pin-rivet
3a thread class right-hand flush countersunk head style 0.1825" grip length unjf thread series
01-469-7853
Pin-rivet
3a thread class right-hand flush countersunk head style 0.495" grip length unjf thread series
01-469-7934
Pin-rivet
3a thread class right-hand flush countersunk head style 0.370" grip length unjf thread series
01-469-7998
Blind Rivet
Used on 4920014373636. 0.062" grip length tensile strength pounds, 1450, body length, 0.375", head diameter, 0.500" zinc surface treated
01-469-8561
Pin-rivet
Used on mh-47e special operations hekicopter. 3b thread class right-hand 20 thread quantity per inch pin, aft rotor shaft length 2.00inches ly; underhead length to chamfered threaded end is 1.72" ly; end item is cargo helicopter; all diameters on a common centerline to be concentric to each other within .010 dia unless otherwise noted; break all sharp edges; all threads per mil-s-8879; heat treat in accordance with bac 5617 to 150-170 ksi uts cadmium surface treated unjf thread series
01-469-8565
Pin-rivet
Used on mh-47e special operations hekicopter. 3b thread class right-hand 20 thread quantity per inch pin, aft rotor shaft length 2.00inches ly; underhead length to chamfered threaded end is 1.72" ly; end item is cargo helicopter; all diameters on a common centerline to be concentric to each other within .010 dia unless otherwise noted; break all sharp edges; all threads per mil-s-8879; heat treat in accordance with bac 5617 to 150-170 ksi uts cadmium surface treated unjf thread series
01-469-8661
Solid Rivet
Universal head style 1.521" grip length anodize or oxide film surface treated
