00-117-6890
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.631 mils grip length 26000 single pounds per square inch shear strength anodize or chromate surface treated
00-117-6891
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.756 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6892
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.881 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6893
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style anodize surface treated
00-117-6894
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.131 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6895
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.256 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6896
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.506 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6897
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.756 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6898
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.053 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6899
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.177 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6900
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.365 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6901
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.615 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6903
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6904
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.990 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6905
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.115 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6906
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.365 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6907
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.615 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6908
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 2.115 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6909
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 2.615 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6910
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.531 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6911
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.531 centimeters grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6926
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style anodize surface treated
00-117-6928
Solid Rivet
Oval/truss head style anodize surface treated
00-117-6929
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.146" grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6930
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.208 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6931
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.281 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6932
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.334 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6933
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.396 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6934
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.468 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6936
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style anodize or chromate surface treated
00-117-6937
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.047 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6938
Solid Rivet
Used on w/s:close in weapon system (ciws-phalanx); aircraft, (ac-130h, mc-130h, ec-130e, hc-130); def comm meteorl (an/tmq-028, an/tcc-76, an/tps-068, an-tcc-77); missile, advanced medium range air-to-air (amraam)/aim120a; support equipment, b-1 aircraft; support equipment, b-52 aircraft; engine, aircraft tf33-pw-102 (c-135e, ec-135h/k/p); teammate, an/trq-32; radar set, an/pps-5b. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 26000 single pounds per square inch shear strength rivet has 0.020 inch depth dimple in head, with a diameter of 0.030" anodize or chromate surface treated
00-117-6939
Solid Rivet
Used on w/s:teammate, an/trq-32; radar set, an/tpn-18; airborne mobile dir air spt ctl (2id),(02m jul83)(an/uyq-3a); aircraft, (ac-130h, mc-130h, ec-130e, hc-130); communications terminal, satellite an/gsc-39(v)1; traffic jam, an/tlq-17a; aircraft, thunderbolt ii, a-10; suppoort equipment, b-52 aircraft; support equipment, b-1 aircraft; missile, advanced medium range air-to-air (amraam)/aim120a. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style anodize or chromate surface treated
00-117-6941
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.297 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6942
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.359" grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6943
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.421 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6945
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.599 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6946
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.724 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6947
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.849" grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6948
Solid Rivet
Used on w/s: helicopter, mh-53e; missile, all-weather anti-ship, harpoon (agm-84); switching unit, telephone, auto; helicopter, advance attack, ah-1w; helicopter, search and rescue, hh-60h; aircraft, (ac-130h, mc-130h, ec-130e, hc-130); aircraft, c-2a (reprocured); missile, air-to-air, phoenix (aim-54); helicopter, carrier based asw, sh-60f. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6949
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.062" grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6950
Solid Rivet
Used on w/s: deff comm meteorl (an/tmq-028,an/tcc-76,an/tps-068,an/tcc-77); aircraft, ac-130h, mc-130h, ec-130e, hc-130); support equipment, b-1 aircraft; airborne mobile dir air spt ctl (2id), (02mjul83)(an/uyq-3a); support equipment, b-52 aircraft; missile, advanced medium range air-to-air (amraam)/aim120a; communications terminal, satellite an/gsc-39(v)1; engine, aircraft tf33-pw-102 (c-135e, ec-135h/k/p); central message switch, an/tyc-39a. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.124" grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6951
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.177" grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6952
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.240" grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6953
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.302" grip length 26000 single pounds per square inch shear strength the item is a flight safety critical aircraft part (fscap) . oxide film or anodize surface treated
00-117-6955
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.427 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6956
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.552 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6957
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.677 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6959
Solid Rivet
Used on w/s: f/a-18e/f hornet aircraft; fms-aircraft, hawkeye e-2c; los angeles class ssn (688); aircraft, c-2a (reprocured); missile, advanced medium range air-t0-air (amraam)/aim120a; aircraft, airlifter c-17a; missile, minuteman lgm-30; joint stars target radar system; missile, all-weather ant-ship, harpoon (agm-84); engine, aircraft, t56-a-7/15 (c-130b/e/h/n/p). flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.927" grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
00-117-6960
Solid Rivet
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.052 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
