01-502-4650
Plate Nut Spacer
01-502-4651
Plate Nut Spacer
01-502-4676
Recessed Washer
01-502-4679
Plain Assembled Washer Nut
01-502-4681
Recessed Washer
01-502-4682
Plain Assembled Washer Nut
01-502-4718
Plate Nut Spacer
01-502-4811
Flat Washer
Used on f/a-18e aircraft. 1.384" hole diameter navy) washer, tab--safety wire smaller end of washer is tabbed back 40-50 degrees beginning at 0.940" from washer center hole
01-502-4812
Flat Washer
Used on f/a-18e aircraft. 0.696" hole diameter navy) washer, tab--safety wire small end of washer is tabbed 40-50 degrees beginning at 0.600" from washer center hole
01-502-4820
Flat Washer
Used on f/a-18e aircraft. 1.255" hole diameter navy) washer, tab--safety wire smaller end of washer is tabbed back 40-50 degrees beginning at 0.880" from washer center hole
01-502-4822
Flat Washer
Used on f/a-18e aircraft. 1.134" hole diameter navy) washer, tab--safety wire smaller end of washer is tabbed back at 40-50 degrees beginning at 0.820" from washer center hole
01-502-4824
Flat Washer
Used on f/a-18e aircraft. 1.005" hole diameter navy) washer, tab--safety wire small end of washer is tabbed 40-50 degrees beginning 0.760" from washer center hole.
01-502-4825
Flat Washer
Used on f/a-18 e/f. 1.764" hole diameter navy) washer, tab - safety wire hwasher has 40-50 degree angled tab at smaller end at approximately 0.530" from center of washer hole diameter. tab has one 0.062 inch diameter wire hole located at approximate center of the tab.
01-502-4828
Flat Washer
Used on f/a-18 e/f. 1.134" hole diameter navy) washer, tab - safety wire hwasher has 40-50 degree angled tab at smaller end at approximately 0.538" from center of washer hole diameter. tab has one 0.062 inch diameter wire hole located at approximate center of the tab.
01-502-4829
Flat Washer
Used on f/a-18e aircraft. 1.009" hole diameter navy) washer, tab--safety wire small end of washer is tabbed 40-50 degrees beginning at 0.760" from washer center hole
01-502-4839
Flat Washer
Used on f/a-18e aircraft. 1.509" hole diameter small end of washer is tabbed back at 40-50 degrees beginning 1.000 inch from center of washer hole.
01-502-4840
Flat Washer
Used on f/a-18e aircraft. 1.259" hole diameter navy) washer, tab--safety wire smaller end of washer is tabbed 40-50 degrees beginning at 0.880" from washer center hole
01-502-4852
Flat Washer
Used on f/a-18e aircraft. 1.764" hole diameter navy) washer, tab--safety wire smaller end of washer is tabbed back at 40-50 degrees beginning at 1.130" from center of washer hole
01-502-4857
Flat Washer
Used on f/a-18e aircraft. 1.634" hole diameter navy) washer, tab--safety wire small end of washer is tabbed back at 40-50 degrees beginning 1.070" from center of washer hole
01-502-4919
Plain Clinch Nut
Used on aircraft engine, models ae1107, t406-ad-400, ae2100a/c, ae2100d2/d3/j. nut, clinch serrated shank
01-502-5091
Plain Hexagon Nut
Used on nimrod aircraft. self locking nut; hex width 0.307; inner diameter 0.125; height 0.180
01-502-5315
Self-locking Hexagon Nut
Used on l21b super piper cub.
01-502-5316
Self-locking Hexagon Nut
Used on l21b super piper cub.
01-502-5331
Self-locking Hexagon Nut
Used on l21b super piper cub aircraft.
01-502-5399
Plain Hexagon Nut
14mm nut; grade 5
01-502-5447
Self-locking Clinch Nut
3b thread class right-hand 56 thread quantity per inch passivate surface treated
01-502-5467
Flat Washer
0.640" hole diameter corners of washer rounded
01-502-5703
Plain Round Nut
Used on ae1107, t406-ad-400, ae2100a,c and ae2100d2,d3, j engines. 3b thread class right-hand 16 thread quantity per inch nut, spanner-end slots cup washer lkd
01-502-5897
Flat Washer
Used on 0-360a3a alternator.
01-502-5975
Plain Round Nut
Bearing nut
01-502-5994
Plain Round Nut
Front bearing nut
01-502-6063
Plate Nut Spacer
01-502-6135
Spring Tension Washer
01-502-6267
Flat Washer
Used on an/pvs-15. 0.123" hole diameter oxide surface treated
01-502-6311
Plate Nut Spacer
Used on f-18 e/f. shim-anchor nut surface treatment two coats of mil-prf-85582, type 1, class C2, primer applied per mil-std-7179 passivate surface treated
01-502-6625
Self-locking Gang C Nut Assembly
Used on aircraft, thunderbolt ii, a-10. 3b thread class right-hand 72.000" overall length 0.416" overall width 32 thread quantity per inch cadmium surface treated
01-502-6629
Self-locking Gang C Nut Assembly
Used on aircraft, thunderbolt ii, a-10. 3b thread class right-hand 72.000" overall length 0.416" overall width 32 thread quantity per inch cadmium surface treated
01-502-6645
Plain Round Nut
01-502-6677
Sleeve Nut
Used on 1730-01-476-9370, jack, bevel gear. nut has 4 drilled holes, 0.562 phosphate surface treated
01-502-6697
Washer Blank
Used on transmitter assembly.
01-502-6721
Plain Hexagon Nut
Used on engine fuel trim solenoid valve kit 2.
01-502-6722
Self-locking Round Nut
Used on engine fuel trim solenoid.
01-502-6830
Plate Nut Spacer
01-502-6849
Plain Hexagon Nut
01-502-6936
Plain Hexagon Nut
Used on engine, aircraft, f110-ge-100/129 (f-16 c/d). right-hand nut has 3 drilled holes thru, 15mm, equally spaced passivate surface treated
01-502-6939
Plain Hexagon Nut
Used on engine, aircraft, f110-ge-100/129 (f-16 c/d). right-hand nut has 3 drilled holes thru, 15mm, equally spaced nickel surface treated
01-502-6940
Plain Hexagon Nut
Used on engine, aircraft, f110-ge-100/129 (f-16 c/d). right-hand nut has 3 drilled holes thru, 15mm, equally spaced passivate surface treated
