NSN 5305-01-529-3693 NIIN 015293693 — Close Tolerance Screw

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
5305-01-529-3693
5305015293693
Description:
SCREW,CLOSE TOLERANCE
NSN Assigned:
14-APR-05
DEMIL:
NO
Shelf Life:
N/A
UOM:
1 EA
Using Services:
Navy, Air Force

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

5305-01-529-3693 Specification Set by the OEM (see RNCC code 3)

Thread Class AAJD:

3a

Thread Direction AAJF:

RIGHT-Hand

Thread Length AASA:

0.260in. ⁓17/64"

Fastener Length AASB:

0.591in. ⁓19/32"

Head Style AASK:

undercut pan no. 2

Head Diameter AASL:

0.547 in.

Head Height AASU:

0.127 in. ⁓9/64"

Spline Major Diameter AAUJ:

0.155in.

Grip Diameter AAUR:

0.188in. and 0.189in.

Internal Drive Style ABQZ:

torx

End Item Identification AGAV:

MV-22 (V-22 lrip 1 E-Nsn isil

Nominal Thread Diameter AHYM:

0.190in. (UTS #10)

Grip Length ANEE:

0.188in.

Thread Quantity Per Inch CMLP:

32

Minimum Tensile Strength CQBC:

3180 pounds per square inch

Criticality Code Justification CRTL:

feat

Part Name Assigned By Controlling Agency CXCY:

screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu

Special Features FEAT:

essential to weapon system performance or operation, or the preservation of life or safety of operating personnel

Material MATT:

iron alloy 660

Material Document And Classification MDCL:

ams 5731 fed spec 1st material response or ams 5732 fed spec 2nd material response or ams 5737 fed spec 3rd material response or ams 5853 fed spec 4th material response

Surface Treatment SFTT:

cadmium

Surface Treatment Document And Classification STDC:

AMS-QQ-P-416, type 2, class 2 fed spec single treatment response

Thread Series Designator THSD:

unjf

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
120-259E3P3
Cage Code:
97499
RNCC:
3
RNVC:
2
DAC:
5
RNAAC:
KE
Status:
A
MSDS:
SADC:
Part Number:
120-259E 3P3
Cage Code:
06950
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
120-259E 3P3
Cage Code:
06725
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
120-259E 3P3
Cage Code:
0K6Z0
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
120-259E 3P3
Cage Code:
0ZC92
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
120-259E 3P3
Cage Code:
1EM77
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
120-259E 3P3
Cage Code:
27624
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
120-259E 3P3
Cage Code:
56878
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
120-259E 3P3
Cage Code:
62206
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
120-259E 3P3
Cage Code:
62384
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
120-259E 3P3
Cage Code:
80539
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
29294
FIIG:
A003B0
Concept No.:
App. Key:
SS
Cond. Code:
1
Status:
A
HEAD STYLE UNDERCUT PAN NO. 2 style nsn 5305-01-529-3693
INTERNAL DRIVE STYLE TORX style nsn 5305-01-529-3693

Definition Definition of approved item name (AIN): "SCREW,CLOSE TOLERANCE"

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
--
Paclk Weight:
0.0000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

5305-01-529-3693 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
ADPE:
0
CRITL:
Y
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

ADPE 0

Represents items with no adp components

Criticality Y

The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restrictions or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
SMS
SOS:
MMAC:
NV
MCC:
SOS:
SMS
SOS:
V2
MMAC:
MCC:
SOS:
SMS
SOS:
MMAC:
MCC:
Source of Supply (SOS) SMS

Defense logistics agency, enterprise business systems

Material Management (MMAC) NV

Joint vertical lift aircraft cv-22 (osprey)

Special Material (SMIC) V2

Mv-22 aircraft

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.

Solicitation History DLA solicitations for NSN 5305-01-529-3693

Solicitation
Ends
Qty
AMSC
Buyer
PR
SMB
Solicitation:
SPE5E217TD446
End Date:
08/11/2017
Qty:
396 Ea
AMSC:
C
Buyer Code:
PHPHB
PR:
0070153087
SMB:
0%