01-504-0305
Profile Gage
Mark iv, nut plate structure gauge
01-504-2373
Profile Gage
Used on hh-60h, and hh-60j configuration helicopters. cross sectional shape is hexagonal
01-504-4560
Profile Gage
Used on f100/200/220e,gage-vane arm to sync ring radial wear, serd 9450, the new tool would measure the looseness of the fourth vane sync ring designed to interface with engine hardware in an assembled state and would display repeatable readings of fore and aft motion of the sync ring assembly.
01-504-5653
Precision Master Level
01-505-9049
Comparator Air Gage
Used on ct7 turboprop engine.
01-506-3215
Plug Countersink Gage
Used on f100-pw-100/200/220/220e. gage, guide pin, SERD9681
01-506-4331
Ring Master Setting Gage
Used on f100-pw-100/200/220/220e. SERD9651, master hyd chuck NO4 brgairseal ring, set master required for repair of p/N4071088, NO4 brg airsealingring assy, set master used to check thconcentricity
01-508-4181
Profile Gage
Used on gage, dial bore-4 bearing front air sealing ring assy, various diameters. electronic dial bore gage is usedwith PWA72818 electronic set master set, to measure the metal seal ring diameters, during
01-508-6098
Ring Master Setting Gage
Used on master set, set-no.4 bearing front air sealing ring assy., various dia. 6master set is used to set PWA72820 electronic dial bore gage before measuring the 4 bores, during
01-508-6099
Ring Master Setting Gage
Used on master, set-no.4 bearing, front air sealing ring assy, hydraulic chuck. set master is used with PWA72816 machining fixture to center the fixture before the machining operation of the front air-seal
01-509-0175
Ring Master Setting Gage
Used on f100-pw-200/220/220e engines. 11.3 in lg, 12.0 in wd, 0.8 in high; serd 9649; master set, hyd NO4
01-509-5076
Profile Gage
Compressor gage; used on C130j AE2100 aircraft engine
01-509-8854
Angle Solid Plate
01-512-5539
Stake Guy Jig
01-515-4072
Profile Gage
Used on J85. gage, check retaining ring, STAGE1 blade. size 9.00 long x 1.00 wide, weight 1lb. serd number 10023
01-515-6725
Disk Master Setting Gage
Used on gage, master-3rd stg turb disk, frt inr snap. PWA72653 master gage consists of a front support connected to a rear support by (2) connector tube assembliesthe front support houses a fixed anvilhaving a vertical wall that locates/contacts (1) of the (2) offset probes OFPWA72652 gage. the set master is stored with companion PWA72652 gage in a foam padded storage container when not in use.serd number 9427.engine-asy turbofan, type F100
01-515-6972
Angle Solid Plate
Used on f5 aircraft.
01-515-9803
Profile Gage
Used on gage, od indicator.
01-516-1899
Disk Master Setting Gage
Used on f100-pw-229 engine. o/a dim l 10.0 x w 3.0 x h 4.0; WT7.0lb; stored with companion PWA72664 gage in foam padded storage container; master gage set is used to check/set PWA72664; master gage is required for repair of worn 3rd stage turbine disk p/n 4080603 at forward inner snap dia.ak.gage used during preliminary machining that prepares disk repair for grit blast
01-516-2412
Track Wear Gage
01-516-6904
Plug Thread Gage
Right-hand
01-517-1632
Thickness Electronic Gage
Ultrasonic thickness gage
01-517-2366
Comparator Electronic Gage
Used on gage,loading. gage is required to measure dim "r" distance between outer end of number five bearing support rod
01-517-3516
Crimping Tool Gage
Part of a dlt tool assembly used to install dm series instrumentation fittings 1/4 inch od
01-518-0552
Profile Gage
Orig mfg name; eddie-bolt 2 gage; nut installation gage; flat type
01-518-0558
Profile Gage
Material stainless steel, heat treated; gage size 6; name assigned by manufacturer eddie-bolt 2 gage nut installation gage cylindrical type
01-518-3433
Crimping Tool Gage
01-518-4286
Comparator Electronic Gage
Used on engine,aircraft, f100-pw-200 (f-16a/b/c/d);490014856295. cartridge type gage head; splashproof (plain bearing) ; 0.375in diameter body on cartridge head; tungsten carbide contact points; straight cable; range +/- .050 / +/- 1.270mm
01-518-4438
Crimping Tool Gage
01-518-6751
Crimping Tool Gage
01-519-6179
Comparator Air Gage
Used on eagle-6 field crash tender.
01-520-4272
Profile Gage
Used on lo hand held measurement tool. the handheld measurement tool is an instrument that is packaged in two separate units. the main control unit is 6" high by 4" deep by 4inches wide
01-521-1589
Profile Gage
Used on engine, f108-cf-100. gage, bow check-lpt blades, stages 1 thru 4 serd number 5148
01-521-7961
Headspace Gage
Used on 7.62 gatling gun w/equip-door gun sys, 1005-01-457-1704.
01-522-1285
Profile Gage
Used on actuator vg j85-ge-21. gage includes pins 21C6166P11 AND21C6166P12, prior to positioning gage to actuator, bolt 3009T13P02
01-522-1995
Profile Gage
Used on gage, go-no go,vg actuator,dim a. use gage 21C6166G03 to check actuator prior to setting vane angles.use gage 21C6166G04 to check actuator after vane angles have been set.serd 10040ge aircraft engine
01-522-8322
Profile Gage
A gage used to check or inspect contour, radius, chamfer, depth, thickness and/or height by inclusive fit of a work piece
01-522-8323
Profile Gage
A gage used to check or inspect contour, radius, chamfer, depth, thickness and/or height by inclusive fit of a work piece
01-522-8324
Profile Gage
A gage used to check or inspect contour, radius, chamfer, depth, thickness and/or height by inclusive fit of a work piece
01-522-9632
Profile Gage
Used on nsn: 1520-01-082-0686.
01-523-1456
Profile Gage
Used on 1520-01-082-0686.
01-523-6358
Profile Gage
Ssbn mfg gages
01-523-6361
Profile Gage
Navy I3b mpg gages
01-524-5544
Profile Gage
Used on fighter aircraft-first (f18e/f). controlling agency name for item is "gage, go-no go"
01-524-5549
Plug Plain Cylindrical Gage
Size range is 0.0751 to 0.1800 inch
01-524-9871
Plug Gage Handle
Used on ship installation badricade. handle, aircraft equip; plug gage handle replacement handle; taperlock; size number 3
01-525-1000
Plug Thread Gage
Used on 4r/5r cog items managed by braso.
01-526-3352
Parallel
8.000" overall length 1.500" overall width
