Inspection Gages And Precision Layout Tools - Supply Class (FSC) 5220

01-434-3203

Snap Fixed Gage

Used on f100-pw-229. jgage, 4th stage tubine airseal, front diameter; incorporates electronic output for dimetrical measurement; includes sensor to measure disk temp; storage container; snap dia: 14.405 in; o/a dim: 17.5l x 3.5w x 5.8h in

5220-01-434-3204

01-434-3204

Flush Pin Plain Cylindrical Gage

Used on f100-pw-229. gage, flush pin; PWA71149 gage, consists of rect. steel body w/dowel pin into body at each end, gage block doweled & screwed to center of body that houses aisi A2 flush pin which fits into diam. of gage block & has cont. travel within block, notch on o.d. of fl pin capt. by dowel press thru gage block to ctrl trav. dist. of pin; flush pin end must be flush to gage block if tube is in ass. position; 9.0 in. l; 2.0 in. w; 0.5 in. h; 3.0 lb; serd 7265

5220-01-434-3208

01-434-3208

Profile Gage

Used on f100-pw-100/200/220/220e. master gage frt tur; consists of steel bar having gge contact block & support block doweled & bolted to top surf. of each end, each contact block has an aisi A2 or equiv, repl. wear insert attd to innermost face; cont. dim. bet contact blocks is 25.1600 +/- .0002 representing front turb. case mid inner snap diam., used to check & set PWA715056 gage; container w/foam insert provided; 28.0 in. l; 3.0 in. w; 4.0 in. h; 10.0 lb; serd 7825

5220-01-434-3209

01-434-3209

Profile Gage

Used on f100-pw-229. agage, indicator i.d. used to inspect the finish machine dia of the inner air seal rubber on the 1st stage compressor stator assembly consisting of aframe with adjustable radial

5220-01-434-3210

01-434-3210

Snap Fixed Gage

Used on f100-pw-229. rgage, 3rd stage turbine disk, front inner snap diameter; incorporates electronic output for dimetrical measurement; includes sensor to measure disk temp; storage container; snap dia: 7.520 in; o/a dim: 10.5l x 3.5w x 5.8h in

5220-01-434-3213

01-434-3213

Snap Fixed Gage

Used on f100-pw-229. jgage, 4th stage turbine airseal, real diameter; incorporates electronic output for dimetrical measurement; includes sensor to measure disk temp; storage container; snap dia: 13.931 in; o/a dim: 17.0l x 3.5w x 5.8h in

5220-01-434-3214

01-434-3214

Profile Gage

Used on f100-pw-100/200/220/220e. gage, front turbine case used to measure the turbine case after machining by contacting the inner case walls at a 25.108 to 25.104 in dia; consists of a dial indicator, a parallel type bar, positioning posts, and an adjustable locking detail having a sliding contact leg; 3.5 in dia face; green tint, 0.0001 in grads, and 0.008 in range per revolution

5220-01-434-3215

01-434-3215

Profile Gage

Used on f100-pw-100/200/220/220e. gage frt turb case; consists of dial ind., parallel type bar, positioning posts, & adj./lock. detail having sliding contact leg, dial ind., sized & tinted for enhanced vis., par. bar is alum. to red. tool weight, bar spans meas. area & has 2 spher. ended legs at outward ends resting on fr flange face to pos. adj. gaging details at one end of bar; dial ind. reads plus

5220-01-434-6338

01-434-6338

Profile Gage

Used on f100-pw-100/200/220/220e. master, gage, front turbine case used to set the gage prior to precision measuring of the inner dia of the turbine case front flange; consists of a steel bar having support block doweled

5220-01-434-6339

01-434-6339

Profile Gage

Used on f100-pw-100/200/220/220e. master, gage, front turbine case used to set the gage prior to precision measuring of the outer dia of the turbine case rear flange; consists of a steel bar having support block doweled

5220-01-434-7667

01-434-7667

Profile Gage

Used on f100-pw-100/200/220/220e. gage front turbine; incl. dial ind., a parallel type bar, positioning posts, & adj./locking detail having sliding contact leg; dial ind. sized & tinted for enhanced visib.; par. bar const. from alum., spans meas. area & has 2 spher. ended legs at outward ends; gage kept in foam padded box; gage req. calib. every 12 months; meas. reading must be 26.700 +/- 0.002 for accept.; 28.0 in. l; 2.0 in. w; 3.0 in. h; 10.0 lbs; serd 7821, F33657-94-c-0031

5220-01-435-1436

01-435-1436

Profile Gage

Used to check wear/angle of fan blades

5220-01-435-1523

01-435-1523

Profile Gage

5220-01-435-5577

01-435-5577

Comparator Air Gage

Used on puller/pusher. calibrated to 1/4 of 1 percent

5220-01-435-7434