01-383-2301
Profile Gage
Used on 1005-01-360-7146.
01-383-3304
Profile Gage
Used on ground and airborne gas turbine engine, aux power units.
01-383-3395
Profile Gage
Fixture, measure; used to measure thrust bearing end play
01-383-6218
Profile Gage
Gage, fixed, end play
01-383-9021
Profile Gage
0.600in height x 0.800in wide; check 8th stage compressor blades
01-383-9901
Profile Gage
3.900in height x 0.700in wide x 0.800in deep; used to measure the high pressure compressor blade lengths
01-383-9912
Profile Gage
1.800in height x 0.600in wide x 0.500in deep; used with holder
01-383-9998
Profile Gage
2.800in height x 0.800in deep x 0.400in wide; used to set dial indicatorbefore the 10th stage blade length inspection
01-384-0168
Profile Gage
0.600in height x 0.800in wide; checks the chord length on the 10th stage compressor blades
01-384-0258
Profile Gage
1.600in height x 0.400in wide by 0.500in deep; used with holder
01-384-0566
Profile Gage
0.600in height x 0.800in wide; check the chord length on the 13th stage compressor blades
01-384-2395
Plug Gage Handle
Used on bu f1 100pw200 eng.,f1 aircraft engine.
01-384-2667
Flush Pin Plain Cylindrical Gage
2.800" overall length to check height clearance betweenblade lock
01-384-2671
Profile Gage
To check high pressure COMPRESSOR14th stage stator vane thickness; material is hardened tool steel
01-384-2675
Profile Gage
To check high pressure COMPRESSOR13th stage stator vane thickness; material is hardened tool steel
01-384-2707
Profile Gage
To check high pressure COMPRESSOR10th stage stator vane thickness; material is hardened tool steel
01-384-2722
Profile Gage
To check high pressure COMPRESSOR11th stage stator vane thickness; material is hardened tool steel
01-384-3367
Profile Gage
To check high pressure COMPRESSOR16th stage stator vane thickness
01-384-3378
Profile Gage
Used on c-17,serd 1159. rqrd to check chord length of 15th stage compressor blades
01-384-3398
Profile Gage
To check high pressure COMPRESSOR15th stage stator vane thickness
01-384-3620
Profile Gage
Used on c-17,serd 1153. rqrd to check chord length of 9th stage compressor blades
01-384-3621
Profile Gage
Used on c-17,serd 1180. rqrd to check high pressure compressor 15th stage stator vane thickness
01-384-3635
Profile Gage
Used on 117 engine,serd 1171. rqrd to check high pressure compressor 10th stage stator vane thickness
01-384-3641
Profile Gage
Used on 117 engine,serd 1173. rqrd to check high pressure compressor 11th stage stator vane thickness
01-384-3642
Profile Gage
Used on 117 engine,serd 1158. rqrd to check chord length of 14th stage compressor blades
01-384-3648
Profile Gage
Used on c-17,serd 1156. rqrd to check chord length of 12th stage compressor blades
01-384-3650
Profile Gage
Used on 117 engine,serd 1175. rqrd to check high pressure compressor 12th stage stator vane thickness
01-384-3659
Profile Gage
Used on c-17,serd 1151. rqrd to check chord length of 7th stage compressor blade
01-384-3662
Profile Gage
Used on 117 engine,serd 1178. rqrd to check high pressure compressor 14th stage stator vane thickness
01-384-3668
Profile Gage
Used on c-17,serd 1155. rqrd to check chord length of the 11th stage compressor blades
01-384-5878
Plug Plain Cylindrical Gage
01-384-6932
Snap Fixed Gage
Used on 117 engine,serd 1163. 2.500" overall length rqrd to reset jaw spread of adjustable plier; matl steel; doweled
01-384-6954
Profile Gage
1.100in x 2.500in x 1.000in; used to set gap of spreading gaging pliers prior to there use
01-384-6976
Profile Gage
1.100in x 2.500in x 1.000in; used to set gap of spreading gaging pliers prior to there use
01-384-6986
Profile Gage
1.100in x 2.500in x 1.000in; used to set gap of spreading gaging pliers prior to there use
01-384-6996
Profile Gage
2.000in high x 0.400in wide x 0.500in deep; used with holder
01-384-7002
Profile Gage
0.800in wide x 0.600in high; required to check the chord length of the 17th stage compressor blades
01-384-7011
Profile Gage
0.800in wide x 0.600in high; required to check the chord length of the 16th stage compressor blades
01-384-7335
Positioning Table
01-384-7373
Plug Plain Cylindrical Gage
01-384-9057
Profile Gage
Used on 117 engine. 0.50 in. wd; 0.50 in. ht; used w/holder
01-384-9065
Profile Gage
Used on 117 engine. ho.50 in. wd; 1.5 in. ht; used with a holder
01-384-9079
Profile Gage
Used on 117 engine. rqrd to check the high pressure compressor 10th stage stator vane thickness; hardened tool steel
01-384-9082
Snap Fixed Gage
Used on 117 engine. 2.500" overall length rqrd to reset spread of jaws on adjustable pliers; matl steel; doweled
01-384-9252
Profile Gage
Gage, angle, bend; used to check final bend angle, right
01-384-9472
Profile Gage
Gage used to check mandrel dia
01-384-9786
Snap Fixed Gage
Used on 117 engine,serd 1165. 2.500" overall length rqrd to set gap of spreading gaging pliers prior to use; doweled
01-384-9787
Profile Gage
Used on 117 engine,serd 1254. 0.50 in. wd; 5.00 in. ht; rqrd to check high pressure compressor 16th stage vane thickness; matl hardened tool steel; slotted at both ends w/go at one end
01-384-9790
Profile Gage
Used on c-17,serd 1415. rqrd to inspect length of seventhstage high pressure compressor blade; hardened steel machined blank; 0.80 in. lg by 0.50 n. wd by 4.40 in. ht