00-136-6868
Depth Dial Indicating Gage
Gage, depth, shroud n
00-136-6870
Depth Dial Indicating Gage
Gage, depth, shroud n
00-136-6872
Depth Dial Indicating Gage
Gage, depth
00-136-6876
Depth Dial Indicating Gage
Gage, depth
00-138-5332
Dial Indicator
00-138-6969
Dial Indicator
00-140-3016
Gage Block
Gage, stop block steel, 0.375 by 0.250 by 0.500
00-140-8943
Height Gage
Gage, height, transfer; 6.500 in. wide, 25.500 in. height; steel
00-142-4113
Thickness Gage
00-142-6797
Thickness Gage
00-142-7061
Dial Indicator
00-144-2631
Thickness Gage
00-144-4793
Gage Block Set
Tungsten carbide; solid; rectangular; gaging range tolerance; porm 0.000001; case provided
00-147-3130
Depth Vernier Gage
00-148-6923
Multiple Folding Rule
00-150-2920
Measuring Tape
Chrome case; belt clip; blade lock
00-151-4506
Angle Gage
Gage, release angle; steel, 5.000 in. l
00-152-0493
Cylindrical Circular Vial Level
20 minutes vial sensitivity
00-152-3628
Dial Indicator
Used on 659706. matl is laminated plastic
00-155-2402
Dial Indicator
Used on corrector follow-up gearing dial assembly.
00-157-7959
Indicating Internal Gage
Used on tf39 engine age. to name: gage, bar, stage 2 fan stator
00-158-0023
Cylindrical Circular Vial Level
00-158-3906
Thickness Gage Stock Set
Blade data, 16 blades, 12 in.lg, 1/2 in.w, thickness, 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007.0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015; no special features
00-158-3908
Plumb Bob Cord Adjuster
00-158-4055
Cannon Bore Erosion Gage
Used on 40 mm,mk.1 mod 0.
00-159-3985
Gage Block Set
Steel, rectangular, solid design; gaging range tolerance porm 0.000028; case provided
00-159-8657
Cylindrical Circular Vial Level
00-160-8452
Indicating Internal Gage
00-165-7859
Cylinder Gage
Consists of dial bore gage, range extension adapter, one ring gage 4.6270 in. dia, and one ring gage 4.2500 in. dia
00-166-8488
Screw Pitch Gage
00-167-0131
Indicating Internal Gage
Gage, inner exhaust
00-167-0298
Depth Dial Indicating Gage
Gage, depth, dome shi
00-171-0766
Level And Plumb
00-171-5201
Mechanics' Dividers
One leg adjustable
00-172-1572
Indicating Internal Gage
00-173-4183
Indicating Internal Gage
Gage, internal comparator; cap. of gage 0.075 in. to 0.250 in., corrosion resisting material, contact points of gaging fingers shall be polished carbide, full scale range shall be not less than 0.0004 in., the power unit shall operate on 110 to 120 v ac, 50/60 cycle, single phase
00-174-3663
Dial Indicator
00-176-8948
Indicating Internal Gage
00-177-3996
Dial Indicator
00-177-4191
Dial Indicator
00-178-1411
Petroleum Gage Stick
Material wood, maple, spec mil-w-3912; class a, 1 in.by 1 in.stock; 70 in.o/a lg, one side marked compartment 1, other side marked compartment 2, in 100 gal graduations to 2500 gal capacity
00-178-4227
Measuring Tape
High visibility orange case; yellow blade
00-178-7959
Dial Indicator
Back dia 2-7/64 in.
00-181-1550
Plumb Bob
Hexagonal head to prevent rolling
00-181-6567
Cylinder Gage
00-181-6574
Depth Dial Indicating Gage
