4940003961660
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
4940-00-396-1660 Specification Set by the OEM (see RNCC code 3)
trailer
1
1
4
any acceptable
nonmagnetic
hose, acid 1; hose, rinse, 25 ft 1; hose, rinse, 50 ft 1; hose, suction 1; hose, vapor cleaning, 25 ft 1; hose, vapor cleaning, 50 ft 1; hose, water inlet 1; gun, rinse 1; gun, vapor 1; rope, engine starting 1; nozzle, flat, 2 in. 1; nozzle, flat, 4 in. 1; nozzle, round 1; wrench, check valve cap 1
pneumatic
gasoline engine
1.0 gallons
25.000 feet and 50.000 feet
front and rear, single
gas or oil
275.0 gallons per hour
air
included
2
not required
not required
90.0 pounds per square inch
150.0 gallons per hour
150.0 pounds per square inch
275.0 gallons per hour
2
nonadjustable
4
fuel and soap concentrate and water
not included
3.5
1
1 type
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "CLEANER,STEAM,PRESSURE JET,TRAIL"
A unit designed to remove surface deposits of foreign materials by means of a forced stream of steam and detergent or water. Excludes cleaner, steam, pressure jet; dishwashing machine, commercial; dishwashing machine, household; and cleaner, pressure, solvent-water
Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Packaging Codes
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
4940-00-396-1660 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
