01-426-3527
Aircraft Maintenance Fixture
Used on kc-135 aircraft. bconsists of micro cutter; pneumatic motor; alignment pin; adapter; spacer; base plate; boring bar; fixture assebbly; manufactures name: nlg boring fixture assembly, nose landing gear boring tool
01-426-4769
Shotpeen Mask
Used on c-17; pw-100; f-117.
01-426-5678
Aircraft Maintenance Repair Kit
Kit, repair, regulator
01-426-7073
Machining Aircraft Engin Fixture
Used on f100-pw-100/200/220/220e engine. fixture.use PWA71507 gage (ref; PWA71510 master) to measure outer snap diameter
01-426-7074
Engine Maintenance Aircr Fixture
Used on f100-pw-100/200/220/220e. fixture round-up.used with; PWA71498 fixture, PWA71405 fixture
01-426-7296
Test Set Case
Used on support equipment,c-130 aircraft. 20.675" overall length 13.500" overall width gasketed closure; includes pressure relief; transit case for test indicator enamel surface treated
01-426-7315
Interface Devic Adapter Assembly
Used on preprovisioning support navicp is poe.
01-426-7604
Plasma Spray Mask
Required to grit blast
01-426-7605
Plasma Spray Mask
Used on f100-pw-100/200/220/220e. required to grit blast
01-426-7606
Plasma Spray Mask
Used on f100-pw-100/200/220/220e. required to grit blasst
01-426-7611
Plasma Spray Mask
Used on f100-pw-100/200/220/220e. required to grit blast
01-426-7623
Engine Maintenance Aircr Fixture
Used on f100-pw-100/200/220/220e. fixture, grit blast/plasma spray front turbine case (frt, mid, rr)
01-426-7626
Engine Maintenance Aircr Fixture
Used on f100-pw-229. needed to locate
01-426-8666
Aircraft Maintenance Fixture
Used on f110-ge-100 aircraft engine. consists of a stepped stainless steel ring that is split into nine equal segements; also containes twenty swirler cup weights; the G03 fixture swirler cup weights driffer from the G02 fixture (NSN4920012765137) swirler weight cups, in that the G03 has smaller swirler weight handles which allow better furnace stacking
01-426-8667
Engine Maintenance Aircr Fixture
Used on tf39-ge-1c. test set, pressure-fan frame to forward transfer gearbox adapter.consists of a "l" shaped steel bracket, manifold block, gage, hose
01-427-2321
Engine Maintenance Aircr Fixture
Used on f100-pw-229. c/o circular base, 6 steel swing clamps, 3 tapped lifting holes; company item name-fixture constraint, 4th stage turbine air seal, front snap diameter
01-427-2322
Maintenance Aircraft Engin Stand
Used on f100-pw-229. stand is steel construction with wheels & castors; the stand secures the drum rotor (shaft down) & can be rolled to transport the rotor
01-427-2323
Engine Maintenance Aircr Fixture
Used on f100-pw-229. bc/o a steel ring base with a flat (within .001) surface & a closely helddiameter, 5 steel swing clamps, & 3 tapped lefting holes; length 19.3 inch, width 19.3 inch, height 7.6 inch, weight 65 lbs
01-427-2329
Electro-mechanical Rota Actuator
Used on lantirn. module, electronic, drive provide compact, high performancesolutions to stepping motor drive requirements; divides each full stp into 10 microsteps, providing 2000 steps perrevolution from standard 1.8 degree stepping motors; high speed bipolar chopper output stages, capable of running stepping motors at speeds in excess OF150 revolutions per second; rull compensation for mid-range resonance
01-427-3549
Aircraft Maintenance Fixture
Used on h-60 helicopter.
01-427-3572
Test Adapter
Used on preprovisioning support navicp is poe.
01-428-1650
Aircraft Maintenance Template
Used on boeing helicopter chinook mk2.
01-428-2932
Interface Devic Adapter Assembly
Used on preprovisioning support navicp is poe.
01-428-2978
Engine Maintenance Aircr Fixture
Used on f117-pw-100. recommended to support test strip specimen of 9th stage vane glass bead peen area to check for intensity
01-428-2986
Engine Maintenance Aircr Fixture
Used on f117-pw-100. recommended to support a test strip specimen of 11th stage blade glass bead peen area to check for intensity
01-428-2990
Engine Maintenance Aircr Fixture
Used on f117-pw-100. fixture required to contain shim stock during brazing process while repairing feather seal groove.
01-428-2993
Engine Maintenance Aircr Fixture
Used on f117-pw-100. required to hold compressor stator lever during bolt hole repair machining operation.
01-428-2996
Engine Maintenance Aircr Fixture
Used on f117-pw-100. used to check gritblast
01-428-2997
Engine Maintenance Aircr Fixture
Used on f117-pw-100. used with masks PWA89676, PWA89727, PWA89726, PWA89728
01-428-3003
Engine Maintenance Aircr Fixture
Used on f117-pwa-100. supports rear hub during plasma spray operations.
01-428-3005
Engine Maintenance Aircr Fixture
Used on f117-pwa-100. used to check out plasma spray operation for rear turbine hub.
01-428-3011
Engine Maintenance Aircr Fixture
Used on f117-pwa-100. will allow shot peen operation
01-428-3026
Engine Maintenance Aircr Fixture
Used on f117-pwa-100. fixture will hold turbine rear hub while shot peening tie rod holes.
01-428-3600
Interface Device Cable Assembly
01-428-3756
Plasma Spray Mask
Used on f117-pw-100. 2.000" group 1 overall length
01-428-3757
Plasma Spray Mask
Used on f117-pwa-100.
01-428-3758
Plasma Spray Mask
Used on f117-pw-100. 2.000" group 1 overall length
01-428-3759
Plasma Spray Mask
Used on f117-pw-100. 2.000" group 1 overall length
01-428-3760
Shotpeen Mask
Used on f117-pw-100.
01-428-3762
Shotpeen Mask
Used on f117-pwa-100.
01-428-6726
Electrical-electron Plug-in Unit
Used on f-18 aircraft.
01-428-7447
Aircraft Maintenance Fixture
Used on special gsa allow.
01-428-7712
Aircraft Maintenance Fixture
01-428-7713
Aircraft Maintenance Fixture
01-428-7739
Aircraft Maintenance Fixture
01-428-7743
Aircraft Maintenance Fixture
01-428-7744
Aircraft Maintenance Fixture
01-428-8820
Aircraft Maintenance Kit
Used on nsn 2840-01-030-4890. kit, masking (rtv) 1st stage stator, compressor
01-428-9057
Radar Aircraft Test Station
Used on f-15s acft.
01-428-9058
Test Adapter Kit
Used on f-15 acft. wprovides mounting assy usrd to attach the uut to the sink cart interface/the test station through the sink cart interface
