01-321-1218
Control Test Set
01-321-1785
Test Program Set
Used on f-15a/b/c/d; fmf-15c/d; fmf/tfmf-15a acft. c/o cables, adapters, connectors, holding fixtures,
01-321-1839
Demand Oxygen Regulat Test Stand
Used on f-16a/b/c/d; c-17 aircraft. demand oxygen regulator c/o pressure altitude meter; flow pressure meter; pressure meter; on/off switch; flow selector switch; digital keyboard inputs; 115.0vac, 400.0 hz., 3-phase
01-321-3055
Test Adapter Set
Used on c-2a acft (peculiar comp.).
01-321-4523
Aircraft Maintenance Fixture
Used on b-1b acft.
01-321-4607
Test Adapter
Used on an/alm206b. adapter is electrostatic sensitive
01-321-4687
Test Adapter
Used on f-111 ais-ra.
01-321-5042
Aircraft Maintenance Fixture
Used on f101-ge-102 and f110-ge-100 engine. c/o steel base plate w/centering pin protruding upward; 3 support blocks welded to it; toggle clamp
01-321-5043
Aircraft Maintenance Fixture
Used on b-1b acft.
01-321-5044
Aircraft Maintenance Fixture
Used on b-1b acft.
01-321-5045
Aircraft Maintenance Fixture
Used on f101-ge-102/f110-ge-100 engine. fmatl: 300 series stainless steel; 20.000 in by 20.000 in, 100.0 lbs.; c/o base plate supporting an inclined rotating mtg plate for the spool; provides vertical access to the dovetail slots at one position; a manual indexing pin locks the spool in position; an almen strip intensity correlation fixture set is provided to allow calibration of peening intensity; almen strip holder set is made of 440 stainless steel hardened to 50-60 on the rockwell c scale
01-321-5046
Engine Maintenance Aircr Fixture
Used on f110-ge-129 engine. drawing name=fixture, lift-vert combustor assembly
01-321-6198
Aircraft Maintenance Fixture Set
Used on f110-ge-100 engine. c/o a base plate
01-321-6199
Aircraft Maintenance Fixture
Used on f100 series acft engine fourth stage turbine blade z-notch. c/o rectangular base with a block to house the rotating root locator; a second block will be required to locate the shroud
01-321-6200
Engine Maintenance Aircr Fixture
Used on f110-ge-100 engine. fixture, ream bracket c/o horizontal bottom plate w/jig rest buttons; horizontal tap drill guide plate; support structure w/locators, clamps
01-321-6201
Aircraft Maintenance Fixture
Used on f101-ge-102/f110-ge-100 engine. c/o base plate; hinged bushing plate; clamping devices; hinge plate down latch; 7.500 in. by 5.000 in.; weight: approx 35.0 lbs
01-321-6202
Aircraft Maintenance Fixture
Used on f101-ge-102/f110-ge-100 engine. c/o 2.000 in. thk. round plate of 4140 steel hardened to rockwell c 3842; machined on upper surface to accept 23 nozzle segments; surfaces are ground to 0.011 axial drop to position forward inner/outer flanges; dowel/diamond pins are provided to locate the segments on the repair datum holes in the outer forward flange at a 29.054 basic dia; studs; knurled knobs
01-321-6203
Aircraft Maintenance Fixture
Used on front frame thrust mount bearing,f101-ge-102 engine. 3.750 in. by 8.000 in. by 3.250 in.; approx 3.5 lbs; c/o double tapered mandrel; flange is modified for 3 adjustment screws for runnout of the bearing housing outside diameter
01-321-6204
Machining Aircraft Engin Fixture
Used on exhaust nozzle primary seal; f110-ge-100 engine. fixture machine 0c/o aluminum base plate w/rest buttons, locators
01-321-6250
Maintenance Aircraft Engin Stand
01-321-6251
Maintenance Aircraft Engin Stand
01-321-6809
Aircraft Maintenance Fixture
Used on f101-ge-102,f110-ge-100 engine. c/o:2 vertical uprights bolted on a base plate 9.500 in. x 4.000 in. x 0.810 in.thk
01-321-6810
Aircraft Maintenance Fixture
Used on f110-ge-100 engine. oc/o alum baseplate 21.000 in. x 6.000 in. x 0.625 in. thk; includes steel block for holding/locating clevis pad w/steel block; trunion end of compression link is held by horiz threaded pin
01-321-6811
Aircraft Maintenance Fixture
Used on b-1b acft; f101-ge-102/f110. 73.0 lbs
01-321-6812
Aircraft Maintenance Fixture
Used on f101-ge-102 engine. circular; hardened steel
01-321-6813
Machining Aircraft Engin Fixture
Used on f101-ge-102, f110-ge-100, f118-ge-100 engines. c/o shaft with one end tapered to act as wedge, an expandible type circular collet ring, and a retainer plate
01-321-6814
Aircraft Maintenance Fixture
Used on f110-ge-engine. hardened alloy stl
01-321-6815
Aircraft Maintenance Fixture
Used on f101-ge-102 engine. c/o stainless steel base plate with several locators, clamps
01-321-6816
Engine Maintenance Aircr Fixture
Used on f110-ge-100 engine. 1010/1020 steel
01-321-6923
Countermeasures Set Test Set
Used on an/alq-155(v), an/alq-172(v), an/alr-46(v). previous name=test set, signal processor
01-321-7883
Test Adapter Kit
Used on f-15e acft support equipment. c/o ate ext board, plug-in unit ext board, ate breakout box, power control monitor ext cables, temp/volt monitor ext cable, storage case
01-321-7903
Aircraft Maintenance Fixture
Used on f110-ge-100,-129,-400 engine programs. fixture, assy/inspect-duct, augmenter mixer 3.0 ft. x 5.0 ft.; 2500.0 lbs; c/o 52.000 in. dia. x 1.500 in. thk. steel base plate w/4 posts supporting an upper support ring that has 20 mtg blocks for attaching to the mixer; the mixer attaches to the mtg blocks at each of the liner supports; the base plate has a center dowel pin
01-321-7904
Aircraft Maintenance Fixture
Used on engine f110. fixture is 35.000 in. dia by 8.000 in.; 70.0 lbs; c/o outer ring, 6 equally spaced spokes; central hub; welded construction; matl: steel; fin: painted for corrosion protection
01-321-7905
Aircraft Maintenance Fixture
Used on f110-general electric-100. 5.0 ft. x 5.0 ft. x 3.0 ft; 2000.0 lbs.; c/o 2 castings; base
01-321-7906
Machining Aircraft Engin Fixture
Used on f110-ge-100 engine. c/o steel base plate 40.5 in dia; has 33.6 in rabbet dia to locate turbine frame; 10 strap clamps to secure frame in place; 2 set of 3 riser clamps located at ctr to support frame; contains set of locator pins; drawing name=fixture, machining-turbine frame
01-321-7907
Aircraft Maintenance Fixture
Used on f110-ge-100 engine. c/o top/bottom plate w/4 jig rest buttons on the outside of each; a hinge bracket is located
01-321-7908
Aircraft Maintenance Fixture
Used on mechanical jackscrew actuator,air inlet duct; b-1b acft.
01-321-7921
Computer Simulator-verifier
Used on c-130,c-141,c-5 acft. aka ground proximity warning system simulation test set
01-321-7968
Fuel System Components A Fixture
Used on f100-pw-229 engine. has opening of 1.500 in.
01-321-9142
Test Adapter
Used on an/alq-155; an/alt-28; 5865-01-085-9657, countermeasures set.
01-321-9284
Maintenance Aircraft Engin Stand
Used on noise suppressor,4920010821095,4920012750875; tf33 p5/p9/pw 102.
01-321-9285
Maintenance Aircraft Engin Stand
Used on noise suppressor,4920010821095,4920012750875; tf-33 p5/p9/pw 102.
01-321-9976
Test Program Set
Used on aircraft model av-8.
01-322-1767
Aircraft Maintenance Fixture
01-322-1768
Aircraft Maintenance Fixture
01-322-1769
Aircraft Maintenance Fixture
01-322-1770
Aircraft Maintenance Fixture
01-322-1771
Aircraft Maintenance Fixture
01-322-1772
Aircraft Maintenance Fixture
