00-762-5323
Valve Seat
Used on 1.500 in. gunmetal gate valve (locked open). B5 plain threaded
00-762-5342
Diaphragm Stop Valve
00-762-5344
Valve Seat
Plain
00-762-5346
Valve Seat
Plain
00-762-6849
Regulating Fluid Pressure Valve
00-762-8852
Regulating Fluid Pressure Valve
00-762-8853
Check Valve
Flow range- 0 to 100 pounds/minute; temperature range- -65 deg. f to +200 deg. f; pressure range- 0 to 15 psig; cracking pressure- the valve shall be spring loaded to the check position, the cracking pressure shall be 2 in. of water; useful life of 50, 000 cycles, operating life of 12, 000 hrs anodize surface treated straight thru
00-762-8854
Check Valve
Anodize surface treated straight thru
00-762-8872
Safety Relief Valve
2a 1st end thread class right-hand 1st end unef 1st end thread series
00-762-8882
Check Valve
Used on f-14a aircraft. 3a 1st end thread class right-hand 1st end weapon system essential straight thru unjs 1st end thread series
00-762-8896
Valve Assembly
00-762-8907
Regulating Fluid Pressure Valve
00-762-8908
Valve Assembly
00-762-8912
Valve Assembly
00-762-9537
Safety Relief Valve
00-762-9548
Regulating Fluid Pressure Valve
00-762-9701
Safety Relief Valve
Used on fleet modernization program-cruisers/destroyers. hand lifting devise is required
00-763-1023
Linear Directional Control Valve
Lg 5.13 in., 2 in.w, 3000 psi operating pressure, 4500 psi proof pressure, 7500 psi burst pressure, 3.0 gpm rated flow, 18 to 30dc operating voltage
00-763-2143
Regulating Fluid Pressure Valve
00-763-2397
Valve Disk
2.620" inside diameter plain
00-763-3322
Globe Valve
3a 1st end thread class right-hand 1st end 12 1st end thread quantity per inch un 1st end thread series
00-763-4187
Plug Valve
3b 1st end thread class right-hand 1st end 14 1st end thread quantity per inch unf 1st end thread series
00-763-4542
Ball Valve
Right-hand all ends npt all ends thread series
00-763-5064
Check Valve
3a all ends thread class right-hand all ends 12 all ends thread quantity per inch hot air media; critical application, mcdonnel aircraft models F4, RF4, and YF4 anodize surface treated straight thru un all ends thread series
00-763-7106
Bleeder Hydraulic System Valve
Anodize surface treated
00-763-8682
Ball Valve
Right-hand all ends 18 all ends thread quantity per inch stem npt all ends thread series
00-763-9866
Valve Seat
Plain
00-764-0290
Regulating Fluid Pressure Valve
00-764-1586
Check Valve
Straight thru
00-764-3294
Check Valve
Right-hand 1st end 27 1st end thread quantity per inch passivate surface treated straight thru anpt 1st end thread series
00-764-4203
Check Valve
Straight thru
00-764-4231
Actuator Valve Special Diaphragm
Special shaped
00-764-6293
Valve Flat Diaphragm
0.312" hole diameter 0.050" material thickness 0.437" center hole diameter 8 bolt hole quantity flat
00-764-6326
Check Valve
1.370 in. l; 1.875 in. dia; w/ 3 0.375 in. dia holes on one end; 9 0.233 in. dia holes on 2nd end;
00-764-6469
Safety Relief Valve
3a 1st end thread class right-hand 1st end unf 1st end thread series
00-764-7056
Valve Disk
0.438" inside diameter plain
00-764-7631
Gate Valve
4 bolt hole quantity bonnet attachment is one piece screw-over or union-ring piece
00-764-7764
Check Valve
Straight thru
00-764-7817
Regulating Fluid Pressure Valve
00-764-7818
Regulating Fluid Pressure Valve
00-764-7866
Ball Valve
Right-hand all ends npt all ends thread series
00-764-7878
Calibrated Flow Valve
Subplate mounted
