00-446-9493
Valve Body
Used on steam turbine,ships propulsion system.
00-446-9749
Valve Piston
3.000" overall length
00-447-0041
Valve Seat
3a single threaded portion thread class 0.656" single threaded portion err default 12 single threaded portion thread quantity per inch threaded flanged un single threaded portion thread series
00-447-0044
Valve Disk
W/shoulder, 2-3/4 in.od by 5/8 in.w near top plug
00-447-0046
Valve Seat
2a single threaded portion thread class 0.531" single threaded portion thread length 12 single threaded portion thread quantity per inch w/5 holes 0.562 in. dia, 1.688 b.c. dia center hole; 0.250 in. dia located in bottom of item threaded flanged un single threaded portion thread series
00-447-0049
Valve Disk
Poppet
00-447-0068
Regulating Fluid Pressure Valve
00-447-0200
Flow Control Valve
00-447-0527
Valve Disk
Used on combat system support equiment.
00-447-0611
Diaphragm Stop Valve
Used on suppressor system.
00-447-0959
Valve Parts Kit
E1 release nut p/n 1451-2 cage 04984; 1 compression screw p/n 1451-3 cage 04984; 1 lock nut p/n 1451-4 cage 04984; 1 top washer p/n 1451-5 cage 04984; 1 spring p/n 1451-7 cage 04984; 1 spindle p/n 1451-8 cage 04984; 1 bottom washer p/n 1451-9 cage 04984; 1 ring pin p/n 1451-10 cage 04984; 1 adjusting ring p/n 1451-11 cage 04984; 1 feather p/n 1451-12 cage 04984; 1 lever pin p/n 1451-14 cage 04984; 1 seal p/n 1451-15 cage 04984; 1 cap screw p/n 1451-16 cage 04984
00-447-1120
Valve Flat Diaphragm
0.027" material thickness 0.180" center hole diameter flat
00-447-1129
Valve Flat Diaphragm
00-447-1149
Check Valve Parts Kit
00-447-2051
Bleeder Hydraulic System Valve
Steel; cadmium plated o/a; 0.375.24 unf 2a rh thd size; 0.375 in. w wrenching flats; 45 deg seat angle; 1.180 in. o/a lg
00-447-4399
Rotary Selector Valve
Steel; configuration is a grooved cylinder with centerbore
00-447-4454
Valve Seat
Bottom end counterbore 0.870 dia by 0.168 in. deep, flange groove 0.145 wide by 0.095, body groove 0.244 wide by 0.077 in. deep plain flanged
00-447-4558
Directional Control Linear Slide
1.707" overall length
00-447-4625
Valve Seat
Plain
00-447-9281
Shutoff Screw Stem Cock
Right-hand 1st end npt 1st end thread series
00-447-9787
Safety Relief Valve
4 1st end bolt hole quantity
00-448-0236
Restrictor Check Valve
3a 1st end thread class right-hand 1st end 16 1st end thread quantity per inch over-all dim., 3.345 in. lg, 1.000 in. across flats anodize surface treated straight thru unf 1st end thread series
00-448-3406
Angle Valve
Valve size 2 in.
00-448-4488
Gate Valve
1st end connection, unthded internal tube-tube od 0.500 in.; body lining matl-nickel alloy 400 or K500
00-448-5196
Valve Flat Diaphragm
0.340" hole diameter 0.050" material thickness 8 bolt hole quantity two 0.220in. dia holes spaced opposite each other on 2.250in. bolt circle dia, one hole 0.280 in. dia located on 5.750 in. dia bolt circle flat
00-448-5197
Fluid Valve Stem
Disk, nickel copper alloy astm B127 or astm B164, qty 2, through hole 0.315 in. dia min 0.317 in. dia max, chamfered both sides 0.031 in. depth, 45.0 deg angle, hub 0.625 in. dia w/raised face 0.250 in. lg, 1.625 in. o/a outside dia, 0.437 in. thk, 125 microinch finish o/a, stem, nickel copper alloy astm B164, qty 1, 5.875 in. lg, 0.311 in. outside dia min 0.313 in. outside dia max, one end thd 1.250 in. lg 5/16-18unc-2a, other end groove 0.062 in. w, 0.093 in. depth, drilled 0.062 in. dia, 1.000 in. depth from end, hole drilled parallel to groove 0.937 in. from end 0.093 in. dia, both ends chamfered 0.031 in. depth 45.0 deg angle, disk
00-448-5198
Needle Valve Stem
1.750" overall length
00-448-5199
Plug Valve
Right-hand all ends npt all ends thread series
00-448-5221
Plug Cock
Right-hand all ends npt all ends thread series
00-448-5235
Ball Valve
Right-hand all ends npt all ends thread series
00-448-5686
Valve Seat
Plain
00-448-5755
Directional Con Sleeve And Slide
00-449-0297
Flow Control Valve
Npt thread series
00-449-0482
Globe Valve
Right-hand all ends npt all ends thread series
00-449-0491
Plug Cock
Right-hand all ends nptf all ends thread series
00-449-0659
Safety Relief Valve
Right-hand 2nd end the end connection identified above as the second end is the valve inlet npt 2nd end thread series
00-449-0702
Angle Valve
3b all ends thread class right-hand all ends passivate surface treated unjf all ends thread series
00-449-0715
Safety Relief Valve
Right-hand 1st end nptf 1st end thread series
00-449-0723
Check Valve
3b all ends thread class right-hand all ends 12 all ends thread quantity per inch cadmium surface treated straight thru unj all ends thread series
00-449-0930
Safety Relief Valve
Right-hand 1st end npt 1st end thread series
00-449-1074
Safety Relief Valve
Right-hand 1st end npt 1st end thread series
00-449-1153
Check Valve
3a all ends thread class right-hand all ends straight thru unjf all ends thread series
00-449-1262
Check Valve
Right-hand all ends passivate surface treated straight thru npt all ends thread series
00-449-1299
Safety Relief Valve
3b all ends thread class right-hand all ends 12 all ends thread quantity per inch unj all ends thread series
