01-575-8306
Tee Valve
2b all ends thread class unf all ends thread series
01-575-8391
Ball Valve
Right-hand all ends full-port design; cast-in mounting pad npt all ends thread series
01-575-8455
Check Valve
Used on 6110-01-5757-2332 brake cross connect manifold; scd-385 mcm-6. sun 30 psi p.o. check viton seals; pilot ratio 3:1; capacity 15 gpm; 2 valves required per manifold assembly screw-in cartridge
01-575-8468
Check Valve
Used on 6110-01-575-2332 brake cross connect manifold; scd-385 mcm-6. sun 15 psi check (nose-side check) ; free flow nose to side check valve non-adjustable, viton seals; 2 required per assembly screw-in cartridge
01-575-8493
Check Valve
Used on 6110-01-575-2332 brakes cross connect manifold; scd-385 mcm-6. inserta 30 psi check valve buna n seals; sae threads no. 6; 2 valves required per assembly, valves are internal to manifold block screw-in cartridge
01-575-8514
Check Valve
Used on 6110-01-575-2337 reservoir cross connect manifold. inserta 30 psi check valve valve is internal to manifold block; buna-n seals, 2 valves required per manifold assembly screw-in cartridge
01-575-8973
Flow Control Valve
01-575-8974
Flow Control Valve
01-575-9091
Fluid Valve Stem
01-575-9373
Ball Valve
Used on lpd17 class.
01-575-9385
Valve Parts Kit
Used on lpd17 class. this item is a rubber parts kit for 1330xs pilot.
01-575-9400
Fluid Valve Stem
01-575-9474
Fluid Valve Stem
01-575-9610
Check Valve
Used on aircraft applications. 2a 1st end thread class right-hand 1st end check valve threaded cartridge 8-2 check valve; free flow nose to side; gpm 10; cavity C08-2; hex with hole 0.874inch; total length 1.574inch; second end diameter 0.499inches screw-in cartridge unf 1st end thread series
01-575-9661
Fluid Valve Stem
01-575-9751
Valve Seat
Used on 4820-01-575-5157 butterfly valve 03as8443l2; new construction cvn77. seat material: polytetrafluoroethylene over buna; used on 3" centerline valve
01-575-9798
Vent Valve
Used on hydraulic pressure valv. relief valve 13.8 to 62.1 bar 200 to 900 PSI8: standard setting: 31.0 bar 450psi at 0.95 lpm or .25 gpm: screw adjusted: port size sae 8 straight thread o ring A7 angle
01-575-9837
Valve Assembly
Jabsco y-valve chemical
01-575-9932
Restrictor Check Valve
Used on valve, restrictor, check. valve, restrictor, two way, filtered hydraulic fluid per dms 2014, type 3; filtration: .008 to .012; when completly contaminated, filter will not collaspe totally at 3000 psid; total length is 3.297"; width is measured by the hex nut .813; .49 gpm at 650 psi, 1.34 gpm at 3000 psi
01-576-0093
Fluid Valve Stem
Used on dee/4-20m kettle; do200 tangent drawoff valve. 2 inch; includes o-ring
01-576-0216
Regulating System Pressure Valve
Used on overhaul/availability lpd17 class. valve, regualting, system
01-576-0223
Flow Control Valve
Used on overhaul/availability lpd17 class. valve flow control
01-576-0232
Fluid Valve Stem
Used on bronze manifold, duplex 4 station 4x3x4. stem, stop
01-576-0240
Ball Valve
Pmeumatic ball valve normally open
01-576-1128
Check Valve
Used on mrap - unique nsn - mrap no permanent wsdc identified.
01-576-1326
Check Valve
Used on 2320-01-552-2922 truck,tractor,line haul,m915a5. valve-check, 1/2npt, tfln
