01-527-2595
Vent Valve
Vent valve, float acuated
01-527-2750
Flow Control Valve
Rpilot 3:1; load holding units 3760 psi; load holding valve setting units 5000 psi; 5 counterclockwise turn adjustments; factory pressure settings 2 IN3/min.; free flow check cracking pressure 25 psi; valve leakage at reseat 5 drops/min.; valve hex 1 1/4 in.; valve installation torque 150-160 lbf ft.; adjustment screw hex socket 5/32 in.; adjustment nut hex 9/16 in.; adjustment nut torque 108 lbf in.; seal kit, buna: 990-017-007; displayed model weight 4.56 lbs.
01-527-2852
Lift-check Valve
8 all ends bolt hole quantity rubber flapper swing check valve with backflow device modified from commerical valve by material of body, cover, cover bolts of bronze, guide stop screw of ss, handlebar of bronze (det 1, 2, 4, 18, 23) ; flanges iaw mil-f-20042 which differs from their commercial valves by dimensions of the o.d., bolt circle diameter straight thru
01-527-2902
Relief Pressure And Temper Valve
Used on oxygen concentration system. vent relief valve flow rate in scfh 150.0, kd 0.04; set pressure range in psig 0.3 to 10.3 bar inline valve; seal material vinton
01-527-2922
Regulating Fluid Pressure Valve
01-527-3397
Fluid Valve Stem
Used on 4 x 6 bronze relief valve.
01-527-3424
Gate Valve
4 bolt hole quantity full port gate valve
01-527-3536
Poppet Drain Cock
Used on 200 series valves.
01-527-3730
Regulating Oxygen System P Valve
Used on c17 acft; acft oxygen system. manufacturers suggested name is regulator, oxygen, automatic opening; contains electrical remote override capability to open the regulator fromthe flight compartment & manual override on the valve to open the regulator for mask deployment
01-527-3809
Valve Cap
Used on 14820-01-527-2852 lift-check valve. modified by material of navy brass from standard commercial valve (cast iron)
01-527-3812
Fluid Valve Stem
Used on 4820-01-527-2852 lift-check valve. this item is an assembly that includes all pieces of the hold open device (hod) : housing, rod, buffer screw, buffer rod o-ring seals, guide stop, stop pin
01-527-4388
Purge Valve
EA79 industrial air vent 3/4 in. npt male pipe thread with 1/2 in. npt female pipe thread connections.
01-527-4394
Valve Cap
Used on 4820-01-527-4388 valve, purge. replacement o-ring, cover
01-527-4418
Stop-check Valve
Used on 1-1/2in vaccume breaker assembly rb model 150. bak-chek control stop
01-527-4696
Stop-check Valve
01-527-4927
Safety Relief Valve
2a 1st end thread class right-hand 2nd end 12 1st end thread quantity per inch orifice size 0.313 inch un 1st end thread series
01-527-4956
Fluid Valve Stem
01-527-4975
Expansion Valve
Used on an/wld-1 (v) remote mine hunting system. ge series thermostatic expansion valve
01-527-5067
Angle Valve
Angle nptfe to flare; M40/P300 deg f; burst pressure 2500 psig
01-527-5298
Safety Relief Valve
Used on separator, oil/water. air eliminator
01-527-5367
Compressed Gas Regulator
01-527-5464
Valve Disk
Used on 4in x 8in simplex cross valve. disc plug
01-527-5470
Safety Relief Valve
Used on hpu system, lpd lift platform. 2a 1st end thread class right-hand 1st end series RAH101 pilot operated relief valve pressure range; 200 to 3000 psi unf 1st end thread series
01-527-5687
Expansion Valve
Valve body additional refrigerants 134a, 404a,
01-527-5935
Valve Piston
Used on assault amphibious vehicle 2350-01-080-9088. 2.937" inside diameter 0.687" overall length sleeve-piston-ko 2sp-MOD50-3od x 2.5id
01-527-6145
Disk Valve Retainer
Used on guided) stop valve.
01-527-6383
Relief Pressure And Temper Valve
Used on oxygen concentration system.
01-527-7152
Directional Control Linear Slide
Used on frick screw compressor model 283.
01-527-7153
Directional Control Linear Slide
Used on frick screw compressor model 283.
01-527-7154
Directional Control Linear Slide
Used on frick screw compressor model 283.
01-527-7157
Directional Control Linear Slide
Used on frick screw compressor model 283.
01-527-7167
Safety Pressure Relief Head
01-527-7197
Valve Ported Ball
Used on model wcn18 large capacity washer. dump valve, depend-o-drain; chassis anddrain group
01-527-7261
Ball Valve
Valve, shut-off ball live loaded valve for low-temperature service
01-527-7276
Shut-off Valve Cartridge
Used on assault amphibious vehicle 2350-01-080-9088. counterbalance valve capacity 30 gpm, cavity t-2a, installation torque (lb.ft.) 45/50,
01-527-7277
Globe Valve
Full flow globe valve
01-527-7280
Gland Valve Flange
01-527-7286
Check Valve
Used on diaphragm injector model c-600. right-hand all ends injection fitting end connection has a 2 step size of 1/4in first step screw-in cartridge npt all ends thread series
01-527-7297
Foot Valve
Used on diaphragm injector model c-600. footvalve/strainer
01-527-7307
Safety Relief Valve
Right-hand all ends npt all ends thread series
01-527-7314
Drain Cock
Brass air cock angle
01-527-7391
Ball Valve
Used on chilled water plant.
