Nonpowered Valves FSG 48 — FSC 4820

NSN
NIIN
Name
Details
01-485-9203
Regulating Fluid Pressure Valve
Used on all source analysis system. e/i; portable bath unit nsn 4510-01-163-6775
01-485-9290
Valve Seat
01-485-9297
Valve Assembly
Used on e/i five ton liq; 4-way pilot operator valve. pilot port only 0.125 inch npt nptf thread series
01-485-9303
Fluid Valve Stem
01-485-9305
Safety Relief Valve Parts Kit
01-485-9314
Valve Cap
01-485-9320
Valve Assembly
01-485-9382
Ball Valve
Used on interconnection. right-hand all ends body material:bronze, astm B584 alloy 844; stem:silicon bronze, astm B371 alloy 694; polytetrafluoroethylene seats; steam rating: 150 wsp; handle: lever with vnyl grip standard A1 straight thru npt all ends thread series
01-485-9401
Ball Valve
Used on 13 meter personnel boat. 2b all ends thread class right-hand all ends 14 all ends thread quantity per inch three required for each boat; used in fuel supply system. one each used as shutoff valve on starboard nptf all ends thread series
01-485-9467
Thermostatic Temperatu Regulator
01-485-9546
Valve Piston
01-485-9550
Valve Parts Kit
Used on class ssn. next higher assy pump, hyd han
01-485-9674
Angle Valve
Used on interconnection. right-hand all ends angle needle valve valve stem material: cres 303, uses a buna-n o-ring with a 1/2" orifice npt all ends thread series
01-485-9704
Safety Relief Valve
Used on valve relf 2.50x3.50 ips, 725 psi, cf3.
01-485-9814
Thermostatic Temperatu Regulator
E/i:66ecp
01-485-9823
Check Ball
E/i:dsl.engine
01-485-9827
Ball Valve
Valve, ball, 5/8 o.d, swagelok end connections.
01-485-9831
Regulating Fluid Pressure Valve
E/i:dsl.engine
01-485-9870
Ball Valve
Used on 13 meter personnel boat. right-hand all ends 18 all ends thread quantity per inch this is a three-way valve. it has no off position. used in the fuel return system. npt all ends thread series
01-485-9904
Drain Cock
E/i:crankcase (920415) angle
01-486-0039
Pressure Equalizing Gaseou Valve
Breather valve nha torpedo, consu
01-486-0078
Check Ball
Machined surfaces 125 micoinches
01-486-0194
Ball Valve
2b all ends thread class right-hand all ends 14 all ends thread quantity per inch ball-type fuel shut-off valve 90 degree on/off turn; lever npt all ends thread series
01-486-0195
Ball Valve
2b all ends thread class right-hand all ends 14 all ends thread quantity per inch three-way diverter valve 3-way 90 degree turn flow style; stainless steel lever npt all ends thread series
01-486-0277
Globe Valve
01-486-0286
Globe Valve
01-486-0291
Flow Control Valve
Used on compressor unit wp5000. two of these valves required for each compressor unit.
01-486-0432
Regulating Fluid Pressure Valve
Pressure range controlled by springs, three included, 50 to 120 psi, 100 to 1100 psi,
01-486-0546
Ball Valve
Cap screw, soc.hd
01-486-0556
Valve Seat
E/i: 1.5 ball valve
01-486-0559
Angle Valve
01-486-0564
Valve Cap
Used on end item dry deck, fit-up. manufacturers suggested name is yoke, valve
01-486-0569
Valve Gear Operator
Used on seawolf class ssn. remote operation
01-486-0570
Fluid Valve Stem
E/i:.500 ball valve, self-locking nylon insert on stem.
01-486-0573
Angle Valve
01-486-0587
Valve Ported Ball
Aisi-316, e/i .500 ball valve
01-486-0593
Ball Valve
01-486-0594
Valve Body
Used on caterpillar engines.
01-486-0599
Working Linear Dire Body Section
Used on rough terrain container handler(rtch), model rt240, direct vendor delivery (dvd), nsn 3990-01-473-3998, cage: 1nwy2, part number tra240-55s3m, tm 10-3930-675, contract number: daae07-99-c-s008.
01-486-0600
Valve Assembly
Used on caterpillar engines.
01-486-0601
Fluid Valve Stem
E/i:1.5 inch ball valve, cap screw soc. hd.
01-486-0605
Shutoff Screw Stem Cock
Used on e/i 3655ncd019134. right-hand 1st end shutoff cock lever handle 0.500 male npt x spout, length 2.312 inch, center to outside edge of threaded end 1.250 inch angle npt 1st end thread series
01-486-0614
Valve Ported Ball
E/i:1.500 ball valve, cap screws soc.hd.
01-486-0619
Valve Seat
E/i:.500 ball valve
01-486-0622
Working Linear Dire Body Section
Used on rough terrain container handler(rtch), model rt240, direct vendor delivery (dvd), nsn 3990-01-473-3998, cage: 1nwy2, part number tra240-55s3m, tm 10-3930-675, contract number: daae07-99-c-s008.
01-486-0636
Ball Valve
Cap screw hex head w/nylon inserts
01-486-0641
Stop-check Valve
01-486-0671
Valve Repair Kit
Used on governor gp bsc 611098, 6111-00, 611366, 611101 and governor gp 611179 and 611102.
01-486-0847
Blanking Plate Assembly
Manufacturer nomenclature end plate assembly
01-486-0874
Valve Stem Guide
Plant, reverse osmosis 50M3/day