00-375-7795
Valve Seat
Threaded flanged
00-375-7821
Valve Seat
Passivate surface treated plain flanged
00-375-7822
Valve Piston
1.780" overall length
00-375-7851
Valve Disk
For safety relief valve
00-375-7854
Valve Disk
2b thread class plug unf thread series
00-375-7855
Valve Disk
2b thread class plug unf thread series
00-375-7857
Valve Seat
3a single threaded portion thread class 0.563" single threaded portion err default 18 single threaded portion thread quantity per inch B5 plain threaded uns single threaded portion thread series
00-375-7858
Valve Disk
2a thread class 18 thread quantity per inch plug uns thread series
00-375-7909
Valve Disk
0.395" inside diameter swing check
00-375-7921
Valve Piston
Used on valve chk swg .75ips.
00-375-7976
Valve Disk
0.330" inside diameter brass arm swing check
00-375-7978
Angle Valve
8 2nd end bolt hole quantity flange 9.250 in. dia w/9.813 in. dia bolt holes equally spaced on a 7.688 in. dia bolt circle situated 2.765 in. from end under seat for mounting purpose, flange is face raised 0.150 in. by 6.375 in. dia
00-375-7979
Fluid Valve Stem
Used on valve anl 4.00ips.
00-375-7980
Valve Disk
Gunmetal top
00-375-7981
Fluid Valve Stem
6.156" overall length
00-375-7982
Fluid Valve Stem
00-375-7986
Fluid Valve Stem
00-375-7995
Fluid Valve Stem
00-375-7996
Disk Valve Retainer
00-375-7997
Fluid Valve Stem
Used on manifold.
00-375-8001
Fluid Valve Stem
00-375-8003
Fluid Valve Stem
00-375-8004
Fluid Valve Stem
00-375-8060
Exhaust Control Valve
00-375-8071
Flow Control Valve
Used on valve hyd intlk 1.50ips.
00-375-8079
Flow Control Valve
Used on valve exhaust.
00-375-8090
Disk Valve Retainer
00-375-8091
Flow Control Valve
Used on valve check stp.
00-375-8136
Valve Flat Diaphragm
0.395" hole diameter 0.125" material thickness 0.385" center hole diameter 16 bolt hole quantity flat
00-375-8191
Valve Seat
Plain flanged
00-375-8197
Angle Valve
2a 1st end thread class right-hand 2nd end
00-375-8200
Safety Relief Valve
00-375-8202
Globe Valve
Right-hand 1st end
00-375-8204
Safety Relief Valve
Right-hand all ends npt all ends thread series
00-375-8288
Flow Control Valve
00-375-8295
Valve Assembly
3000 psi rated
00-375-8296
Linear Directional Control Valve
00-375-8299
Valve Piston
Steel, polished or ground, 3.006 in. lg o/a, @2.000 in. head dia, 0.500 in. shaft dia, 1.250 in. dia, by 0.375 in. depth counter bore in head, 0.312 in. w groove around head, 1.625 in. id of groove, two 0.125 in. w grooves on shaft, 0.391 in. @id of grooves, 0.250 in. w, by 0.250 in. id groove centered between first two grooves
