00-351-7374
Shuttle Valve
00-351-7392
Angle Valve
Valve size 0.250 in.
00-351-7396
Angle Valve
Valve size 2.000 in.
00-351-7486
Plug Cock
Right-hand 2nd end npt 2nd end thread series
00-351-7832
Regulating Fluid Pressure Valve
Used on 2320-00-055-9262 truck,dump,5 ton,6x6.
00-351-9483
Valve Flat Diaphragm
0.125" hole diameter 3.500" overall length 3.484" overall width 0.125" material thickness two corners rounded, two corners notched at right angles; four mounting holes flat
00-352-0176
Gate Valve
20 bolt hole quantity
00-352-1879
Check Valve
Right-hand all ends 14 1st end thread quantity per inch straight thru npt all ends thread series
00-352-3063
Fluid Valve Stem
Used on 24109838024. steel, 1.625 in. o/a lg, 0.343 in. dia stem, 0.683 in. dia bottom of head, 0.343 in. dia top of head, 5 grooves 0.250 in. w, equally spaced on head, 0.187 in. lg by 30 deg chamfer end of stem
00-353-0472
Valve Seat
Plain
00-353-0483
Valve Flat Diaphragm
0.125" material thickness 0.250" center hole diameter seats 7/16 in. dia, 1/16 in. thk
00-353-0485
Valve Flat Diaphragm
00-353-0544
Valve Seat
B5 plain threaded
00-353-1676
Valve Disk
0.282" inside diameter 0.343 in. square upper portion of disk body
00-353-1683
Flow Control Valve
00-353-1805
Foot Valve
Strainer on 2nd end
00-353-1982
Valve Body
2.062" overall length
00-353-2922
Flow Control Valve
Npt thread series
00-353-2984
Linear Directional Control Valve
Used on crane-shovel,truck monted,gar wood model m20-a. alum alloy body, 1/4-18 nptf thd inlet, outlet
00-353-4419
Ball Valve
Right-hand 1st end must be min cv of 3.8, stampede with wp, wog, mfr cadmium surface treated anpt 1st end thread series
00-353-4420
Ball Valve
Right-hand 1st end must be min cv of 13, stampede with wp, wog, mfr cadmium surface treated anpt 1st end thread series
00-353-4519
Check Valve
Right-hand all ends straight thru npt all ends thread series
00-353-4576
Float Valve
Right-hand all ends npt 1st end thread series
00-353-4633
Valve Seat
Plain
00-353-4684
Actuator Valve Special Diaphragm
Diaphram, valve, special shape
00-353-4702
Valve Seat
Plain flanged
00-353-4715
Valve Seat
Plain
00-353-4732
Rupturable Disk
00-353-4742
Safety Pressure Relief Head
00-353-4753
Needle Valve Stem
1.205" overall length
00-353-4794
Fluid Valve Stem
2.000" overall length
00-353-5136
Valve Flat Diaphragm
0.370" hole diameter 0.125" material thickness 0.125" center hole diameter 6 bolt hole quantity flat
00-353-5294
Valve Assembly
00-353-5513
Safety Relief Valve
Right-hand 2nd end npt 2nd end thread series
00-353-5799
Valve Assembly
Consists of retaining ring
00-353-7504
Stop-check Valve
3a 1st end thread class right-hand 1st end 20 1st end thread quantity per inch straight thru w/offset
00-353-7562
Shuttle Valve
3a 2nd end thread class right-hand 2nd end unjf 2nd end thread series
00-353-7638
Stop-check Valve
3a all ends thread class right-hand all ends anodize surface treated offset unf all ends thread series
00-353-7642
Check Valve
4 1st end bolt hole quantity anodize surface treated straight thru
00-353-7764
Check Valve
3a all ends thread class right-hand all ends 18 1st end thread quantity per inch straight thru unjf all ends thread series
00-353-7880
Linear Directional Control Valve
Used on aircraft model s-3a. operating pressure 4000.0 psi, nitrogen fluid, temp 65 deg f minus to 200 deg f plus
00-353-8186
Fluid Valve Stem
00-353-8191
Valve Disk
Adjusting slot on tapered end of disk cone check
00-353-9132
Safety Relief Valve
Right-hand 1st end oxide surface treated npt 1st end thread series
