00-348-2163
Disk Valve Retainer
0.280" overall length retainer material brass usn C36000; disc material silicon rubber zz-r-765/gen
00-348-2164
Valve Cap
Used on valve assembly, oxygen cylinder, bailout. 0.750" outside diameter side check seal material polytriflouochloroethylene, ams 3646 or ams 3650; cap material brass uns C3600
00-348-2310
Restrictor Check Valve
3b 1st end thread class right-hand 1st end 18 1st end thread quantity per inch over-all dim., 3.938 in. lg, 1.000 in. across flats straight thru unf 1st end thread series
00-348-2957
Valve Seat
0.875" single threaded portion thread length 8 single threaded portion thread quantity per inch two lugs, 0.625 in. square, welded on 6.25 in.id 180 degrees apart threaded flanged uns single threaded portion thread series
00-348-3185
Safety Relief Valve
4 all ends bolt hole quantity
00-348-3190
Valve Seat
Plain
00-348-3205
Valve Seat
Plain
00-348-3308
Safety Relief Valve
2a all ends thread class right-hand all ends cartridge type unf all ends thread series
00-348-4375
Safety Relief Valve
3b 1st end thread class right-hand 1st end 18 1st end thread quantity per inch anodize surface treated unf 1st end thread series
00-348-4395
Lift-check Valve
3b 1st end thread class right-hand 1st end 18 1st end thread quantity per inch 0.228 in. stem stroke for reverse flow anodize surface treated straight thru w/offset unf 1st end thread series
00-348-5277
Ball Valve
Right-hand all ends must be a min cv of 12, must be stamped with wp, wog, mfr, size cadmium surface treated anpt all ends thread series
00-348-5434
Valve Disk
0.395" inside diameter plain
00-348-5450
Valve Flat Diaphragm
0.155" material thickness 0.500" center hole diameter flat
00-348-8174
Rotary Selector Valve
Furnished with manipulator npt thread series
00-348-8277
Safety Relief Valve
00-348-8281
Check Valve
3a all ends thread class right-hand all ends 20 all ends thread quantity per inch the end connection identified above as the second end is the valve inlet passivate surface treated straight thru unjs all ends thread series
00-348-8284
Check Valve
3a all ends thread class right-hand all ends 18 1st end thread quantity per inch the end connection identified above as the second end is the valve inlet passivate surface treated straight thru unjs all ends thread series
00-348-8715
Valve Seat
Plain flanged
00-349-2204
Bypass Valve-hand
Used on mk10mod0,launching system.
00-349-4273
Valve Disk
2b thread class 18 thread quantity per inch 4 bottom guide rails below seat surface plug uns thread series
00-349-4315
Safety Relief Valve
Right-hand 2nd end npt 2nd end thread series
00-349-4574
Valve Piston
Cres type 310; 3.598 in. od; 3.656 in h o/a
00-349-6715
Flow Control Valve
Used on dresser pump division model 10x11x12 vdda vertical reciprocating pump. cartridge type npt thread series
00-349-7137
Valve Flat Diaphragm
00-349-7154
Valve Flat Diaphragm
0.090" hole diameter 0.005" material thickness 0.250" center hole diameter 1 bolt hole quantity furnished with center screw flat
00-349-7166
Check Valve
Right-hand 2nd end cadmium surface treated angle npt 2nd end thread series
00-349-7188
Valve Disk
0.155" inside diameter seat angle 47.0 degree plain
00-349-7275
Fluid Valve Stem
2.551" overall length
00-349-7771
Fluid Valve Stem
4.688" overall length
00-349-8951
Safety Relief Valve
Right-hand 2nd end 11-1/2 1st end thread quantity per inch the end connection identified above as the second end is the valve inlet npt 2nd end thread series
00-349-8952
Safety Relief Valve
00-349-8968
Stop-lift-check Valve
3b all ends thread class right-hand all ends furnished with a rooler oxide surface treated straight thru unf all ends thread series
00-349-9072
Ball Valve
Right-hand all ends enamel surface treated npt all ends thread series
00-349-9073
Check Valve
3/8 inch valve size; identical flareless tube 9/16-18 unjf 3a
00-349-9089
Safety Relief Valve
2a 1st end thread class right-hand 1st end 16 1st end thread quantity per inch un 1st end thread series
00-349-9371
Safety Relief Valve
00-349-9987
Directional Con Sleeve And Slide
00-350-0333
Valve Seat
Stamp letter l on top to identify ontario steel from other steel inserts plain
00-350-0827
Angle Valve
Right-hand 2nd end npt 2nd end thread series
00-350-1048
Directional Con Sleeve And Slide
Slide p/n 62198a; sleeve p/n 63002a; used on p/n AV14H2107-1 valve
00-350-4011
Safety Relief Valve
Right-hand 1st end npt 1st end thread series
00-350-5717
Check Valve
3a 2nd end thread class right-hand 2nd end 20 1st end thread quantity per inch straight thru unf 1st end thread series
00-350-6356
Safety Relief Valve
Right-hand all ends 18 1st end thread quantity per inch npt all ends thread series
